• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.40-49
• /
• 2010

This study was conducted to examine genetic variation on leaf characteristics of Zelkova serrata populations. Leaf samples were obtained from eighteen populations and fourteen leaf characteristics such as leaf blade length, leaf width, leaf area and etc. were measured. In all leaf characteristics, there were significant differences among populations and among individuals within population. Most variance of leaf characteristics was contributed to among individuals within population except for length from leaf base to maximum width (x3) and the ratio of x3 to leaf blade length (x10). The relatively high variations of leaf characteristics were found at Gurye, Jungeup and Gyungju populations while Youngwol, Cheongsong, Youngchun populations showed the lower variation. There was high correlation among leaf characteristics related to leaf size, but not among the variables of ratio between leaf characteristics. Length from leaf base to maximum width(x3) and the ratio of x3 to x10 showed significant positive correlation with latitude and altitude of populations, which reflect the differences of mean annual temperature among populations. Mean annual rainfall of populations showed negative correlation with leaf blade length, leaf width, length from apex to first serration and leaf area. Four principal components (PC) were deduced from principal component analysis, which explain the 88.5% of total variance of leaf characteristics. Leaf area, length from leaf base to maximum width, serration number and petiole length showed the highest contribution to PC1, PC2, PC3, PC4, respectively. According to cluster analysis, the populations of Z. serrata were divided into two groups, which reflect the difference of mean annual temperature between groups. Within group, however, specific tendency of clustering was not observed among populattions.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.193-208
• /
• 2021

The characteristics of the microcrack lengths(①), microcrack spacings(②) and Brazilian tensile strengths(③) related to the six directions of rock cleavages(H2~R1) in Geochang granite were analyzed. First, the 18 cumulative graphs for the above three major factors representing unique characteristics of the rock cleavages were made. Through the general chart for these graphs classified into three planes and three rock cleavages, the 28 parameters on the length, spacing and Brazilian tensile strength have been determined. The results of correlation analysis among these parameters are summarized as follows. Second, the above parameters were classified into six groups(I~VI) according to the sorting order on the magnitude of parameter values among three rock cleavages and three planes. The values of parameters belonging to group I and II are in order of R(rift) < G(grain) < H(hardway) and H < G < R. The values of the 8 parameters on the length of line(os₂, 𝚫s, 𝚫L and oS^mean), the exponent(λ_L^mean and λ_S^mean), the slope(a^mean) and the anisotropy coefficient (An^mean) are in order of R < G < H and H'(hardway plane) < G'(grain plane) < R'(rift plane). Third, the noticeable differences in distribution patterns among the six types of charts for three planes and three rock cleavages are as follows. From the chart for three planes, the values of 𝚫L, 𝚫s and 𝚫σ_t, corresponding to the distance between two points where the two fitting lines meet on the X-axis, increase in the order of R' < H' < G'. In particular, the two graphs of R2 and G2 related to the length and Brazilian tensile strength are almost parallel to each other and show the distribution characteristics of hardway plane. Among the graphs related to the Brazilian tensile strength, the overall shape for hardway plane is similar to that for grain. From the chart for three rock cleavages, the slopes of the graphs related to the length increase in the order of R < G < H, while those of the graphs related to the spacing and Brazilian tensile strength decrease in the order of R < G < H. Lastly, the characteristics of variation among the six rock cleavages, the three planes and the three rock cleavages were visualized through the correlation chart among the above parameters from this study.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.603-620
• /
• 2021

A land nodal seismic system was employed to acquire seismic reflection data using stand-alone cable-free receivers in a land-river area. Acquiring reliable data using this technology is very cost effective, as it avoids topographic problems in the deployment and collection of receivers. The land nodal airgun system deployed on the mouth of the Hyungsan River (in Pohang, Gyeongsangbuk Province) used airgun sources in the river and receivers on the riverbank, with subparallel source and receiver lines, approximately 120 m-spaced. Seismic data collected on the riverbank are characterized by a low signal-to-noise (S/N) and inconsistent reflection events. Most of the events are represented by hyperbola in the field records, including direct waves, guided waves, air waves, and Scholte surface waves, in contrast to the straight lines in the data collected conventionally where source and receiver lines are coincident. The processing strategy included enhancing the signal behind the low-frequency large-amplitude noise with a cascaded application of bandpass and f-k filters for the attenuation of air waves. Static time delays caused by the cross-offset distance between sources and receivers are corrected, with a focus on mapping the shallow reflections obscured by guided wave and air wave noise. A new time-distance equation and curve for direct and air waves are suggested for the correction of the static time delay caused by the cross-offset between source and receiver. Investigation of the minimum cross-offset gathers shows well-aligned shallow reflections around 200 ms after time-shift correction. This time-delay static correction based on the direct wave is found essential to improving the data from parallel source and receiver lines. Data acquisition and processing strategies developed in this study for land nodal airgun seismic systems will be readily applicable to seismic data from land-sea areas when high-resolution signal data becomes available in the future for investigation of shallow gas reservoirs, faults, and engineering designs for the development of coastal areas.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.647-658
• /
• 2021

In this study, the change of temperature, chemical composition, and helium gas of thermal water in Pohang area was observed from January 2018 to June 2019 in order to interpret the relationship with earthquake events. During observation period earthquakes above M 2.0 within 100 km in a radius from a geothermal well occurred 58 including two earthquake events with a magnitude of 3.0~3.9 and two earthquake events with a magnitude of 4.0~4.9. We introduce a q-factor and earthquake effectiveness (ε) to express the influence of each earthquake as magnitude and distance factors. The geothermal well of 715 m deep was developed in the Bulguksa biotite granite, and the water temperature was observed in the variation from 51.8 to 56.3℃ during monitoring period. At M 4.1 and M 4.6 earthquake events, the increase of geothermal water temperature (𝜟T 2.6~4.5℃) was recorded, and slight change in specific ionic components such as SO₄ and Cl, and of chemical types on the Piper diagram were observed. In the ³He/⁴He vs ⁴He/²⁰Ne diagram, the original mixing ratio of helium isotope before and after the magnitude 4.1 earthquake was slightly changed from 83.0% to 83.2% of crust-origin ⁴He, and the from 16.3% to 16.7% of mantle-origin ³He. Hot-cold water mixing ratio before and after earthquakes by using the quartz and chalcedony solubility curves of the silica-enthalpy mixing model was calculated to interpret the temperature change of geothermal water. The model calculation shows the increase of 6.93~7.72% and 1.65~4.94% of hot water ratio at E1 and E2 earthquakes, respectively. Conclusively, the magnitude of earthquake for observable change in the temperature and helium isotope of thermal water is of 4.1 or higher and q-factor value of 30.0 or higher in the study site.

• Journal of Nutrition and Health
• /
• v.56 no.1
• /
• pp.97-111
• /
• 2023

Purpose: Childhood obesity has become a social problem due to the social distancing necessitated by the coronavirus disease 2019 pandemic. This study aimed to identify the dietary problems of obese children through various dietary assessment methods and to confirm the usefulness of each method. Methods: The subjects were 88 students in the 4th to 6th grade of elementary school who participated in the nutrition camp organised by the Busan Metropolitan Office of Education, 2020. To evaluate dietary problems and assess diet quality, 24-hour meal records, monthly food intake frequency, and Dietary Screening Test (DST) data were analyzed. Results: Of the subjects, 15.7%, 30.3%, and 53.9% were normal weight, overweight, and obese, respectively. The average age was 11.77 ± 0.77 years and the average body mass index was 23.96 ± 3.01 kg/m². It was observed from the 24-hour meal record method that the overweight and obese subject groups consumed fewer green vegetables (p < 0.001) and white vegetables (p < 0.01) than the normal weight group. In the monthly food intake frequency method, the consumption of ramen (p < 0.01), snacks (p < 0.05), and sausages (p < 0.05) were high in the obese group, and that of anchovies, broccoli, and sweet pumpkin was high in the normal group (p < 0.05). The comparative data from the DST revealed that the overweight and obese groups had less vegetable intake than the normal weight group (p < 0.01) and had higher intakes of dairy products, fast food, and sweet snacks (p < 0.05). Conclusion: The usefulness of each method in the dietary evaluation of obese children was confirmed. To address the problem of obesity, it is necessary to evaluate the dietary problem and approach it with a customized solution tailor-made for the individual subject.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.40-48
• /
• 2023

This study is part of a foundational research effort aimed at developing a suitability index for breeding grounds related to avian activities along the domestic South and West coasts, including islands. Focus Group Interviews (FGI) and Analytic Hierarchy Process (AHP) analyses were conducted. The results are as follows. First, as a result of determining the value of the suitability of coastal bird breeding sites, the 'Natural Value(0.763)' was higher than the 'Artificial Value(0.237)'. Other artificial values were identified as sub-ranked except for 'Protected Areas' to ensure continuous integrity of breeding spaces. Second, as a result of re-establishing the 25 evaluation items classified in the two-time FGI as higher concepts, nine natural values and five artificial values were finally selected as a total of 14. Third, the results of the mid-classification evaluation of the importance of the suitability of coastal bird breeding sites were identified in the order of 'Ecological Value(0.392)', 'Topographic Value(0.251)', 'Passive Interference(0.124)', 'Geological Value(0.120)', and 'Active Interference(0.113)'. Fourth, the results of the priority of evaluation items of coastal bird breeding sites were in the order of 'Vegetation Distribution (0.187)', 'Area of Mudflats(0.118)', 'Presence or Absence of Mudflats(0.092)', 'Appearance of Natural Enemies(0.087)', 'Protected Areas(0.08)', 'Island Area (0.069)', 'Over-Breeding devastation(0.064)', 'Soil Composition Ratio(0.056)', 'Distance from Land(0.054)', 'Ocean farm area (0.045)', 'Cultivated land area(0.041)', 'Cultivation behavior(0.038)', 'Angle of the Surface(0.036)', and 'Land Use(0.033)'. It is judged that the weighting result value of the evaluation items derived in this study can be used for priority evaluation focusing on the coastal bird breeding area space. However, it seems that the correlation with the unique habitat suitability of bird individuals needs to be supplemented, and spatial analysis research incorporating species-specific characteristics will be left as a future task.