• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.74-80
• /
• 2009

This study was conducted to evaluate cultivation to save the production method cost of warm type garlic. The optimum system for producing excellent seed bulbs by using bulbils of garlic has been required. The bigger size bulbils induced fast growth and lower rate of non-cloved bulbs. The ratio of non-cloved bulbs was the highest in the 0.1 g bulbils sowing of 'Namdo' and was low in the big size bulbils sowing. The bulbil growth rate of 'Deaseo' was much faster than that of 'Namdo', but most of 'Deaseo' bulbils showed low rate of non-cloved bulbs and small size scales in bulbs. The higher productivities of "Namdo" bulbils appeared at the September 11th sowing time, but 'Deaseo' bulbils produced small size non-cloved bulbs and got the very low ratio of non-cloved bulb production in all of the treatment, sowing that Jeju Island could not produce the non-cloved bulbs with 'Deaseo' garlic bulbuls. The growth rate such as leave number, leave length, bulb and clove size in the sowing distance of big size bulbils increased as the sowing distance was wider, but the rate of non-cloved bulbils decreased regardless of treatment. More than 3 g clove in the $10{\times}15cm$ distance of bulbs was produced resulted in sowing clove production potentials by using big size bulbil.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.435-444
• /
• 2015

This paper specifies on a virtual array design of a 77 GHz vehicle radar for detecting a moving target at a time division transmit and a near range. The virtual array designed reduces a hardware complexity, weight and price. However, a synthesized beam of the virtual array has a high side lobe by a phase distortion of receive signals when the moving target is detected at the time division transmit. For this, a subarray receive signal with a same phase is used and the side lobe of the synthesized beam is suppressed above at least 10 dB. Also the virtual array has a beam distortion by a spherical wave when the vehicle radar operates at near range. So a boresight receive signal of each target range is compensated at each receive signal. Therefore the synthesized beam with compensation recovers a normal main lobe and improves the side lobe about 10~15 dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.31-37
• /
• 2000

In the case of metal-induced lateral crystallization (MILC) for low temperature poly-Si TFT, offset length between Ni-thin film and the sides of gate could be modified to control the location of MILC boundary. Electrical characteristics were compared to analyze the effect of MILC boundary that was located either in or out of the channel region of the TFT. By removing the MILC boundary from channel region, on current, subthreshold slope and leakage current properties could be improved. When MILC boundary was located in the channel region, leakage current was reduced with electrical stress biasing. The amount of reduction increased as the channel width increased, but it was independent of the channel length.

• Korean Journal of Plant Taxonomy
• /
• v.37 no.3
• /
• pp.225-237
• /
• 2007

In order to estimate the genetic relationships among four taxa of Korean Symplocaceae and their regional populations, RAPDs analysis was performed. The length of the amplified DNA fragments ranged from 150 to 1,900 bp. Ninety-two RAPD bands were scored for 11 primers and the genetic distance was calculated with by Nei-Li's genetic dissimilarity. Deciduous and evergreen groups were clearly separated in the UPGMA analysis. Symplocos coreana was clustered as a distinct group, and S. sawafutagi and S. tanakana were also clustered at specific level, respectively. The RAPD data was useful to cognize the genetic variation and to discuss the relationships among Korean Symplocaceae

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.11-18
• /
• 2000

When supersonic underexpanded jets are exhausted from the nozzle, complex shock cell configurations such as barrel shock, expansion fan, Mach disc, and exhaust-gas jet boundary are appeared repetitively. The shock cell is smeared by turbulence dissipation and disappeared in long distance from the nozzle. When underexpanded jet is suddenly impinged on a flat plate, it forms very complex flow structure. In this paper, we solve compressible Wavier-Stokes equation adapting finite volume method to obtain jet impingement flow structure and compare calculated data with experimental ones. It is shown that numerical simulation data are in good agreement with experimental one in a short distance between nozzle exit and flat plate and little influence of underexpanded ratio is appeared in jet impingement now distribution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.183-194
• /
• 2011

Synthetic aperture radar (SAR) is widely used because of high resolution imaging capability in all weather and day/night condition. In this paper development of Spotlight SAR simulator is proposed for image quality analysis. Proposed SAR simulator is based on the SAR system design parameters so that SAR image performance can be expected which is essential throughout the full system development procedure from the initial concept design stage to the final in-flight calibration and validation stage. The raw data of ideal point target is first generated by taking account of the flight and imaging geometry and the various SAR system design parameters, and the Spotlight image formation algorithm is implemented in order to obtain the point target response. Finally the image quality of the generated raw data is analyzed in terms of spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.315-317
• /
• 1999

The complications associated with the use of pulmonary artery catheter include dysrhythmias, heart block, pulmonary artery rupture, pulmonary infarction, endocardial damage, balloon rupture, arterial puncture, thromboembolism, air embolism, infection, pneumothorax, and knotting of the catheter. Knotting of the catheter is a rare complication and it should be anticipated if there is an excessive advancement of the pulmonary artery catheter beyond the normally expected distance. We report a successful surgical removal of knotted pulmonary artery catheter by sternotomy and cardiopulmonary bypass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.34-34
• /
• 2000

ZnO 박막은 대칭 육방정계(hexagonal) wurtzite-type crystal로써 결정구조에서의 이방성, 비화학양론 결합구조와 다양한 전기적, 광학적 그리고 타성파적 성질 때문에 현재 여러 응용분양에서 각광을 받고 있는 재료 중의 하나이다. 이러한 특성을 갖는 ZnO 박막은 결정학적으로 기판에 수직인 c-축 우선방위현상(preferred orientation)을 나타내며 압전 특성을 이용하여 응용을 할 경우 이 c-축 우선방위현상에 따라 압전 특성에 큰 차이가 있으며 ZnO 박막의 형성 조건에 의해 c-축 우성배향성은 큰 차이가 있다. 특히 스퍼터법을 이용하여 ZnO 박막을 형성하는 경우에는 투입전력, 기판온도, 분위기 가스압력, 타겟간 거리등의 증착조건에 의해 결정학적 및 전기적 특성이 크게 영향을 받게 된다. 따라서 결정학적으로 양호하며 고품위의 특성을 갖는 ZnO 박막을 제작하기 위해서는 최적의 증착조건을 확립하여 ZnO 박막을 제작할 필요가 있다. 본 연구에서 사용된 대향 타겟식 스퍼터장치는 두 개의 타겟이 서로 마주보게 배치되어 있고 양 타겟에 수직으로 분포하고 있는 자계가 ${\gamma}$-전자를 구속하게 되어 고밀도의 플라즈마를 형성할 수가 있다. 따라서 10-4Torr에서도 안정한 방전을 유지할 수가 있으며 기판의 위치가 플라즈마로부터 이격되어 (plasma-free)있는 위치에 있기 때문에 플라즈마내의 높은 에너지를 갖는 입자들의 기판충돌을 최대한 억제하여 고품위의ZnO 박막을 제작할 수가 있다. 이러한 특징을 갖는 대향타겟식스퍼터장치를 이용하여 본 연구에서는 비정질 slide glass를 기판으로 하여 ZnO 박막을 증착하였으며 XRD(X-ray Diffractometer)를 이용하여 증착된 ZnO 박막의 결정학적 특성을 측정하였다. ZnO 박막은 산소 가스압력과 기판온도, 인가 전류를 변화시켜가며 증착하였으며 이에 따른 박막의 결정성 변화를 알아보았다. 기판온도를 실온에서 점차 증가시켜나가면 $\Delta$$\theta$50은 급격히 감소하며 30$0^{\circ}C$에서는 결정성이 우수한 막을 얻을 수 있었다. 또한 산소 가스 압력이 0.5~1mTorr에서 $\Delta$$\theta$50은 양호한 값을 나타내었지만 그 이상에서는 c-축 배향성이 나빠짐을 확인하였다. 따라서 대향타겟식스퍼터 장치를 이용하여 ZnO 박막을 증착시 가스압력 0.5~1mTorr, 기판온도 20$0^{\circ}C$이상의 막 제작조건에서 결정성이 우수하게 나타나는 것을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.92-92
• /
• 2021

체외수정을 기반으로 이루어지는 성게의 수정 과정은 성게 주변에서 형성되는 복잡한 난류 흐름의 영향을 받게 된다. 성게 몸체의 하류부에 형성되는 재순환 영역 (recirculation zone) 내에는 다양한 난류 와류 흐름이 존재하며, 이들은 성게 몸체에서 방출된 정자와 난자의 충돌을 일으키고 수정 과정에 지대한 영향을 미친다. 즉, 성게의 수정 과정을 이해하기 위해서는 성게 주변의 흐름에 대한 유체역학적 관점에서의 분석이 수행되어야 한다. 본 연구의 목적은 성게 몸체에 의해 발생한 난류 흐름이 성게의 체외 수정에 미치는 영향에 대해 조사하는 것이다. 이를 위해 본 연구에서는 상용 프로그램인 오픈폼 (OpenFaom)을 활용하여 수치 모의를 수행하였다. 성게 주변의 유동장은 LES (Large Eddy Simulation)을 기반으로 모의하였고, 정자와 난자의 확산 궤적은 라그랑지안 입자 추적 (Lagrangian Particle Tracking) 알고리즘을 통해 구현하였다. 총 5개의 유속 조건 (0.025 - 0.20 m/s) 에 대해 모의를 수행하였으며 정자와 난자 사이의 거리를 바탕으로 수정률을 산정하였다. 정자와 난자의 뭉쳐있거나 퍼져있는 공간적인 분포 형태는 Standardized Morisita 지수를 통해 수치적으로 표현하였으며 이들과 수정률과의 관계를 규명하였다. 연구 결과에 따르면 성게 수정은 유속 조건이 0.1 m/s일 때 가장 빈번하게 발생하였으며, 성게 수정의 성공 여부는 크게 2가지 조건에 의해 결정되었다. 첫 번째로, Standardized Morisita 지수가 높을수록 다시 말해 생식세포들이 공간적으로 뭉쳐있어야 하며 두 번째는, 생식세포들을 충돌시킬 수 있는 원동력인 작은 와류가 존재해야 한다. 와류의 크기가 너무 크게 되면 생식세포들은 충돌하지 않고 확산만 되기 때문에 오히려 수정률이 감소하였다. 영역별로 분석한 결과에 따르면, 성게 몸체에 의해 형성된 재순환 영역이 수정과정에 있어 가장 지배적인 영역임을 확인하였다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.15-30
• /
• 1998

The variation of the catches of Skipjack(Euthynnus pelamis) and the relationships between the SST and the fishing ground is examined using the catches data of skipjack obtained by Iwawada Fisheries Cooperative of Chiba Prefecture in Japan from 1982 to 1988. The annual mean catch for Skipjack was 151,375.1kg. the annual fluctuation of catch was that the catch in 1984 was increasing, but it was decreased less than 50% in 1985, and was repeated after being a little recovered in 1986, and it was recovered with the level of 1984 in 1988. The fluctuation of catch for Skipjack in every fishing term is that daily mean catch of the primary fishing term (January, February and March) is 894.6kg, but the middle fishing term(April and May) more than four times of the primary fishing term is 3,666.0kg, the last fishing term(June and July) was decreasing at 767.9kg and the fishing ground gradually becomes extinct. The annual mean SST in fishing ground was an extent of from $19.0^{\circ}C$ to $20.2^{\circ}C$, the mean SST of every year except 1983 was from $19.0^{\circ}C$ to $19.9^{\circ}C$. It is said that the optimum SST of Skipjack in Sotobo sea area is the degree of $19.0^{\circ}C$. Therfore, the thing which will guess the time and the location appeared the optimum SST is the very important factor to operate efficiently. About the extent of SST in fishing ground, it was from $17.0^{\circ}C$ to $19.0^{\circ}C$ on March, from $17.5^{\circ}C$ to $20.5^{\circ}C$ on April and from $17.5^{\circ}C$ to $23.5^{\circ}C$ on May, which the extent of SST was gradually larger and larger, on June from $21.0^{\circ}C$ to $23.5^{\circ}C$, fishing ground was formed only the degree of SST more than $21.0^{\circ}C$.