• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.399-405
• /
• 2007

Providing a precise positioning information is the primary characteristics of GPS. The relative positioning technique which utilizes the common measurements between a GPS reference station and a user is generally used to do the generation of a precise positioning. But if user is far from a GPS reference site, the properties of medium penetrated by GPS signals will be different from each other, It is difficult to eliminate the error sources such as the ionosphere and the troposphere effectively by the double differencing method. In this study the additional error correction values with the ionosphere and the troposphere to the data processing have applied. As a result, the positioning accuracy of fourteen out of seventeen testing sites were improved by appling the error correction values. We also analysed the improved rate of the positioning accuracy by the baseline.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.1
• /
• pp.47-54
• /
• 2014

Precise Point Positioning (PPP) algorithms using GPS code pseudo-range measurements were developed and their accuracy was validated for the purpose of implementing them on a portable device. The group delay, relativistic effect, and satellite-antenna phase center offset models were applied as fundamental corrections for PPP. GPS satellite orbit and clock offsets were taken from the International GNSS Service official products which were interpolated using the best available algorithms. Tropospheric and ionospheric delays were obtained by applying mapping functions to the outputs from scientific GPS data processing software and Global Ionosphere Maps, respectively. When the developed algorithms were tested for four days of data, the horizontal and vertical positioning accuracies were 0.8-1.6 and 1.6-2.2 meters, respectively. This level of performance is comparable to that of Differential GPS, and further improvements and fine-tuning of this suite of PPP algorithms and its implementation at a portable device should be utilized in a variety of surveying and Location-Based Service applications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.96-102
• /
• 2009

In this paper, the effects of the position and the angle of the potential probes on the measurements of the ground resistance with the fall-of-potential method are described and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position and angle of auxiliary probes. In order to analyze the relative error for measuring value of ground resistance due to the position of the potential probe, ground resistance were measured in case that the distance of current probe was fixed at 50[m] and the distance of potential probe was located from l0[m] to 50[m]. Also, the potential probe was located at 30[$^{\circ}$], 45[$^{\circ}$], 60[$^{\circ}$], 90[$^{\circ}$] and 180[$^{\circ}$]. As a consequence, relative error decreased with increasing the distance of potential probe and decreasing the angle between current probe and potential probe. The results could be help to determine the position of potential probe when the ground resistance was measured at grounding system.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.109-112
• /
• 2006

2002년 발사 된 GRACE (Gravity Recovery and Climate Experiment)는 미국과 독일 합작으로 개발된 지구중력장 측정 전용 위성으로 동일한 궤도를 비행하는 두 개의 위성 사이 거리 변화를 측정하여 지구 중력장을 추정하는 사업이다. GRACE 위성의 핵심 관측기인 위성간 거리측정기의 원리에 대해 소개하고, 운용 현황 및 성능에 대해 소개하였다. 발사 전 성능 분석 단계에서 고려되지 못했던 거리측정기 오차 요인에 대해 분석하고, 향후 연구 방향을 제시하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.645-648
• /
• 2017

실외 환경에서는 일반적으로 드론의 위치 측정 또는 위치 제어를 위해서 위성항법장치를 사용한다. 위성항법장치는 실내 환경에서 신호 수신이 어렵기 때문에 실내에서의 위치 측정과 항법을 수행하기 위해서 많은 연구가 이루어진다. 기존의 연구들은 드론에 추가적인 센서를 요구하거나 사전 실내 환경 설정을 가정한다. 그러나 추가적인 장치나 환경 설정 없이 드론의 관성항법장치만으로도 위치 측정이 가능하다. 관성항법장치는 가속도를 적분하여 이동한 거리를 파악하기 때문에 시간이 지날수록 오차가 누적되는 문제점이 있으며 비행 중 기체 진동으로 인한 측정 오차로 정확한 이동거리를 산출해내는 것이 어렵다. 따라서 본 논문에서는 이러한 문제들을 드론의 특성을 반영하여 관성항법장치로부터 발생한 오차를 줄여 보다 정확한 드론의 실내 위치측정 방법을 제안한다.

• The Korean Journal of Applied Statistics
• /
• v.17 no.1
• /
• pp.75-88
• /
• 2004

The Support Vector Machine(SVM) algorithm has paid attention on maximizing the shortest distance between sample points and discrimination hyperplane. This paper suggests the total margin algorithm which considers the distance between all data points and the separating hyperplane. The method extends existing support vector machine algorithm. In addition, this newly proposed method improves the generalization error bound. Numerical experiments show that the total margin algorithm provides good performance, comparing with the previous methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.311-312
• /
• 2011

유비쿼터스 환경에서 위치추적 서비스를 구현하기 위해서는 위치 정보 및 이를 기반으로 한 주변의 상황에 대한 정보와 최적화된 위치 서비스 제공이 필요하다. 본 논문에서 제안하는 오차해결 기법은 실제 위치하는 측정태그와 보정태그와의 거리계산을 통하여 최적의 위치 값을 추출해내는 기법으로써 우선적으로 앤커에 수신된 태그의 위치 값 계산을 한 후 보정태그와의 거리 오차 계산을 통하여 위치 값을 보정한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.473-480
• /
• 2013

In this paper, location recognition algorithm is developed to improve the accuracy using improve Trilateration. The location recognition algorithm is first calculate the location refer to the measured signal power. Error can be occurred when measure distance with arranged node in specific location. If the distance data is received from node (receiver, coordinator), Node selected for location calculation is defined through section. If the distance data is received from node (receiver, coordinator), Node selected for location calculation is defined through section. Second, we apply algorithm of section filtering. If there are 4 sections in node, we consider 1 section to 6 location recognition coordinates. A special characteristic drawback of RF is that the actual distance is actually farther than the calculated received distance data. This is error is incurred when the signal strength increases. We reduce the location recognition error by applying an improved algorithm as secondary after filtering primary through section filtering.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2017

The indoor location based service proposed in the study was assigned to target a moving user. Positioning in the outdoor environment is accurate while using GPS. However, in an indoor environment, positioning is inaccurate and difficult. In order to overcome this, studies of various techniques for positioning based on wireless communication such as Wi-Fi, Zigbee and Bluetooth are being performed. The RSSI value and the delivery signal of the bluetooth beacon are measured according to the distance, and to a database. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance. When average and feedback filtering coefficient are set with 0.5, irregular and highly RSSI values are decreased. As the distance increases, the range of error is confirmed to have a reduction when using a distance calculation correction algorithm. Finally, when using the RSSI measurement results filtering, it corrects an unstable signal. Also, the distance correction algorithm is used to reduce a range of errors.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1802_1803
• /
• 2009

위치추정은 현재 이동로봇 분야에서 매우 중요하게 다루어지는 문제이다. RFID 위치추정 시스템은 저렴하고, 오차누적의 위험이 없고, map과 같은 사전정보의 제약이 없기에 범용적으로 사용될 수 있다. 하지만 RFID 위치추정에 있어, tag들의 서로 다른 인식거리 차이는 위치추정의 오차를 증폭시키는 역할을 한다. 따라서 이 논문에서는 이를 극복하기 위해 tag들의 인식거리 정보를 활용하여 위치추정을 수행한다. 또한 보다 정확한 위치추정을 위해, 송신신호 전력조절을 통하여, 인식거리를 조절하는 방법을 사용한다. 이들의 성능은 simulation을 통해서 확인하였다.