• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.268-275
• /
• 2007

Diversity of the mud flat microbial population in Suncheon Bay was investigated by studying extracellular enzyme activities and 16S rDNA sequences. Four culturable bacterial strains with CMCase, xylanase and protease activities were isolated from the wetland and the mud flat. All the strains produced more xylanase activity than CMCase or protease activity, and the properties of the isolate enzymes from the wetland were similar to those from the mud flat. About 2,000 clones were obtained with the 16S rDNA amplified from the metagenomic DNA isolated from the mud samples. Based on the restriction pattern(s), seventeen clones were selected for base sequence analysis. Of the 17 clones, only 35% (6 clones) were found to be cultured strains and 65% (11 clones) to be uncultured strains. The similarities in the base sequences of the clones ranged from 91.0% to 99.9% with an average similarity of 97.3%. The clones could be divided into 7 groups, Proteobacteria (9 clones, 52.9%), Firmicutes (3 clones, 17.6%), Bacteroidetes (1 clone), Flavobacteria (1 clone), Verrucomicrobia (1 clone), Acidobacteria (1 clone), and Chloroflexi (1 clone). Most of the Proteobacteria clones were gamma Proteobacteria associated with oxidation-reduction of sulfur.

• Journal of Conservation Science
• /
• v.23
• /
• pp.11-24
• /
• 2008

A physical characteristics and chemical compositions change by weathering on the granite were examined for the conservation treatment of the Mireuksaji temple stone pagoda. The natural weathered granite was collected from the Mt. Mireuk, and divided into the classification standards based on weathering degrees and strength measured by rock-test hammer. The results from comparison of the strength measured by undestructive rock-test hammer and the strength values converted from ultrasonic velocity showed that each strength measurement value was proportionate. The water absorption of the sample was 1.68 to 0.20%. The F-type of fresh rock was not naturally saturated and the WW-type was naturally saturated but took quite a long time. The water absorption was increased gradually in order of SW-type, the MW-type and the HW-type according to weathering condition. The CW-type samples showed the highest water absorption among the weathered classification samples. Through dyeing test, it was found out that only the feldspar was dyed out of the F-type and the WW-type. The SW-type and the MW-type were distinguished by the fact that plagioclase being dyed. And dyed area was expanded to quartz crack in HW-type and CW-type. Physical change by weathering of the rock-forming minerals could be classified with 3 grades. Through the XRD analysis, albite among the rock-forming mineral showed remarkable decrease. SEM-EDX analysis of the component change in the rock-forming minerals such as biotite, plagioclase, and orthoclase, showed that in case of highly-weathered grade samples compared with fresh samples, contents of the $Al_2O_3$, $K_2O$, $Na_2O$ increase and CaO, MgO decrease in the biotite, the CaO, $K_2O$ increase and $Na_2O$ decrease in the plagioclase, the $Al_2O_3$ a little increase and $K_2O$, $Na_2O$ decrease in the orthoclase. The results of extracted cation analysis using the powder samples of each weathering grade, the CaO, $Na_2O$, $K_2O$ and MgO are highly chemical variations in rock forming minerals and positive variation show high in the weathering grade of the WW-type and CW-type. This research will be used as an importance data to establish a plan for conservation treatment of composed stone in the Mireuksaji temple stone pagoda.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.37-49
• /
• 1999

The effect of fire-retardant treatment and redrying on the mechanical properties of radiata pine sapwood were evaluated. Small, clear specimens were treated with three different fire-retardant(FR) chemicals, borax-boric acid(BRX), minalith(MIN), and pyresote(PYR), with target retentions of 30 and 60kg/$m^3$, and then redried at maximum dry-bulb temperature of $25^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ or $110^{\circ}C$. Each specimen, including untreated and water-treated controls, was tested in static bending and in compression parallel to grain. The extent of strength reduction was dependent on the type of FR chemicals, retention, and redrying temperature, and a highly significant interaction existed between FR treatment and redrying temperature. Modulus of rupture(MOR) and work to maximum load(WML) were significantly decreased by FR treatment and redrying. None of three FR chemicals adversely affect modulus of elasticity (MOE) and maximum crushing strength(MCS). MOE of BRX treatment and MCS of both BRX and PYR treatment increased significantly compared to untreated controls. No significant differences existed between retention levels except for MOE and MCS of some combinations of FR chemicals and redrying temperatures. Although MOE and MCS was not significantly affected by any of the redrying temperatures, these properties were generally decreased with the increase in redrying temperature. The significant reduction in MOR and WML was observed in BRX treatment when dried at temperatures of $60^{\circ}C$ and above, and in MIN and PYR treatment when dried at temperatures of $80^{\circ}C$ and above. Consequently, BRX-treated radiata pine should not be redried at temperatures >$60^{\circ}C$, and MIN- and PYR-treated radiata pine should not be redried at temperatures > $80^{\circ}C$ where bending strength and energy-related properties are important design considerations.

• Progress in Medical Physics
• /
• v.14 no.2
• /
• pp.124-130
• /
• 2003

Currently, as a consequence of PACS (Picture Archiving Communication System) implementation many hospitals are replacing conventional film-type interpretations of diagnostic medical images with new digital-format interpretations that can also be saved, and retrieve However, the big limitation in PACS is considered to be the lack of mobility. The purpose of this study is to determine the optimal communication packet size. This was done by considering the terms occurred in the wireless communication. After encoding medical image using JPGE2000 image compression method, This method embodied auto-error correction technique preventing the loss of packets occurred during wireless communication. A PC class server, with capabilities to load, collect data, save images, and connect with other network, was installed. Image data were compressed using JPEG2000 algorithm which supports the capability of high energy density and compression ratio, to communicate through a wireless network. Image data were also transmitted in block units coeded by JPEG2000 to prevent the loss of the packets in a wireless network. When JPGE2000 image data were decoded in a PUA (Personal Digital Assistant), it was instantaneous for a MR (Magnetic Resonance) head image of 256${\times}$256 pixels, while it took approximately 5 seconds to decode a CR (Computed Radiography) chest image of 800${\times}$790 pixels. In the transmission of the image data using a CDMA 1X module (Code-Division Multiple Access 1st Generation), 256 byte/sec was considered a stable transmission rate, but packets were lost in the intervals at the transmission rate of 1Kbyte/sec. However, even with a transmission rate above 1 Kbyte/sec, packets were not lost in wireless LAN. Current PACS are not compatible with wireless networks. because it does not have an interface between wired and wireless. Thus, the mobile JPEG2000 image viewing system was developed in order to complement mobility-a limitation in PACS. Moreover, the weak-connections of the wireless network was enhanced by re-transmitting image data within a limitations The results of this study are expected to play an interface role between the current wired-networks PACS and the mobile devices.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.778-787
• /
• 2016

Fermented vinegars using pear was compared according to the appled side materials. Quality characteristics of three kinds of the fermented vinegars (pear vinegar, PV; pear black rice vinegar, PBV; pear mint vinegar, PMV) were investigated, which includes pH, total acidity, colors, the contents of sugar, amino acids, total polyphenol, and total flavonoid, ${\alpha}^{\prime}{\alpha}-diphenyl-{\beta}-pycrylhydrazyl$ (DPPH) radical scavenging ability, and sensory evaluation. Brown rice vinegar (BRV) was used as a control. The pH and total acidity of the fermented pear vinegars were significantly different showing the range of 3.17~3.43 and 4.01~5.05%, respectively (p<0.05). The sugar contents of PV and PMV were significantly higher than other vinegars (p<0.05). L, a, and b values were the highest in PV, PBV, and PMV, respectively. Among the four vinegars, the essential amino acids were the highest in PV with the order of lysine, isoleucine, valine, and threonine. Besides, the fermented pear vinegars have many non-essential amino acids such as glutamic acid and aspartic acid. The aspartic acid content was the highest in PV while glutamic acid content was the highest in BRV. The total polyphenol content was the highest in PV while total flavonoid content was the highest in PBV. The DPPH radical scavenging ability (%) was the highest in PV. In sensory evaluation, PBV showed the highest color, taste and overall preference scores. These results show that pear would be desirable to prepare high-quality vinegars and functional foods.

• Journal of Life Science
• /
• v.23 no.7
• /
• pp.869-878
• /
• 2013

Eleven functional plant materials were identified via a literature search, and their antioxidant capacity and inhibitory effects on lipopolysaccharide (LPS)-induced nitric oxide (NO) production in RAW264.7 cells were tested. Yields from hot water extracts of the materials were the highest (52.10%) in Lycii fructus, and the yields from Phellinus linteus were the lowest (5.7%). The yields of another were 14.50-42.47%. Total phenol and flavonoids contents were the highest in P. linteus. The $EC_{50}$ values for DPPH and ABTS radical scavenging activities were lower than $100{\mu}g/ml$ for Salvia miltiorrhiza, whereas the values for P. linteus, Scutellaria baicalensis, and Paeonia lactiflora were $100-200{\mu}g/ml$. The $EC_{50}$ value for the superoxide anion radical scavenging activity of all the extracts was higher than $300{\mu}g/ml$. P. linteus for the reducing power was shown the highest activity. $Fe^{2+}$ chelating activity was the highest in the Morus alba extract. In an MTT assay, the cell viability of the RAW264.7 LPS-exposed cells was above 80% in extracts of $50{\mu}g/ml$ and above 77% in extracts of $100{\mu}g/ml$ in all the plant materials except Acanthopanax sessiliflorum. NO production in the RAW264.7 LPS-exposed cells showed a 12-fold increase compared to the control. The NO production level of all the extracts was $6.86-26.18{\mu}M$. Notably, $100{\mu}g/ml$ of S. baicalensis extract showed a remarkable decrease in NO production (72%) compared with the control. The potent antioxidant and anti-inflammatory activities of S.baicalensis, P. linteus, S. miltiorrhiza, M. alba, and P. lactiflora suggest that they are potential candidates as functional materials.

• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.164-171
• /
• 2002

Morphological characteristics and growth pattern of 10 Polygonatum collections indigenous to Korea were examined to select the promising medicinal, edible resources and horticultural crops. Plant heights of I0 collections ranged from 15 to 102cm. Stem type was ascending or erect, and node numbers per a stem was 6.2 to 23.2. Phyllotaxis type was alternate or verticillate, and leaf shape was elliptical or linear. Leave numbers per a stem was 5.2 to 63.4, and bract types were classified into bracteate and nonbracteate. Flowers bloomed from May 7 to May 30, and flowering period was 5 to 13 days. Inflorescence types were classified into racemose, corymbose, and umbellate. Flower numbers per a stem was 1.5 to 125.2, and flower length was 13.1 to 30.2㎜. Perianth shapes were classified into tubular, constrict and urceolate. Surface colors of rhizome were pale yellow, pale brown, brown, and dark brown. As a result of this experiment, P. sibiricum, P. odoratum var. pluriflorum and P. odoratum var. thunbergii were thought to be useful as the medicinal and edible resources plants. On the other hand, P. odoratum var. pluriflorum 'Variegata', and P. odoratum var. maximowiczii, P. lasianthum. P. involucratum, P. desoulavyi, P. humile, and P. inflatum were thought to be useful as horticultural plants.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1660-1668
• /
• 2007

The non-ionic surfactant (NIS) Tween 80 was evaluated for its ability to influence invitro cumulative gas production, dry matter digestibility, cellulolytic enzyme activities, anaerobic microbial growth rates, and adhesion to substrates by mixed rumen microorganisms on rice straw, alfalfa hay, cellulose filter paper and tall fescue hay. The addition of NIS Tween 80 at a level of 0.05% increased significantly (P<0.05) in vitro DM digestibility, cumulative gas production, microbial growth rate and cellulolytic enzyme activity from all of substrates used in this study. In vitro cumulative gas production from the NIS-treated substrates; rice straw, alfalfa hay, filter paper and tall fescue hay was significantly (P<0.05) improved by 274.8, 235.2, 231.1 and 719.5% compared with the control, when substrates were incubated for 48 hr in vitro. The addition of 0.05% NIS Tween 80 to cultures growing on alfalfa hay resulted in a significant increase in CMCase (38.1%), xylanase (121.4%), Avicelase (not changed) and amylase (38.2%) activities after 36 h incubation. These results indicated that the addition of 0.05% Tween 80 could greatly stimulate the release of some kinds of cellulolytic enzymes without decreasing cell growth rate in contrast to trends reported with aerobic microorganism. Our SEM observation showed that NIS Tween. 80 did not influence the microbial adhesion to substrates used in the study. Present data clearly show that improved gas production, DM digestibility and cellulolytic enzyme activity by Tween 80 is not due to increased bacterial adhesion on the substrates.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.76-101
• /
• 2013

In this article, we examine the Taeshil of King Jungjo, the 22nd King of the Joseon dynasty located in Yongwol, Gangwondo. The Jangtae culture - burial of the navel cord - is a unique Royal ritual which began during the Shilla dynasty and continued to be carried out for a long period until the Koryo and Joseon dynasties. Until today, about 300 Taebong sites have been discovered, most of which are the Taebong of the decedents of the royal family of the Joseon Kingdom. Most Taeshils built for Kings of the Joseon dynasty were destroyed during the Japanese colonial period, among which only a few have been recovered and managed across the nation. The Taeshil of King Jungjo is one of the leading examples among existing Taeshils in Korea which has managed to preserve well enshrined relics as well as literature documents including stone relics in perfect sets. Thus, in order to examine the Taeshil of King Jungjo comprehensively, first of all literary materials related to the construction of King Jungjo's Taeshil such as the Josunwangjosilrok - "Annals of the Choson Dynasty (朝鮮王朝實錄)". "Jungjongdaewang Taesilgabong Euigwe (正宗大王胎室加封儀軌) - Royal activities related to Taeshil, and local historic documents etc were searched and put together, while a focus was placed on examining the geographical location and state of the Taebong, including the specific style of each part of the Taeshil stone and characteristics of enshrined relics. Such materials are believed to have important utility in the future as a basic material to be used for research, maintenance, and restoration of Taeshil relics. So far, Taeshil relics is a field that has not been able to attract much attention from the academic world, however attention has begun to be paid to Taeshil relics due to recent archaeological excavations as well as an approach to artistic history. Academic research results are expected if Taeshil relics are able to be examined comprehensively in future covering various areas such as literature history, archaeology, and artistic history etc.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.188-197
• /
• 2020

Termites play an important role as decomposers of the forest ecosystem, while simultaneously causing enormous damage to wooden structures. Currently, two species of subterranean termites have been reported in Korea, and termite damage to historical wooden buildings is occurring nationwide due to climate change, forest fertility, and the locational characteristics of historical wooden buildings. Subterranean termites make their nests underground or inside timber. Termites move underground and access wooden structures through the lower parts of the buildings, adjacent to the ground. Once termites attack the wooden structures, it not only spoils the authenticity of cultural heritage structure, but also hampers structural stability due to the decrease in the strength of the material. Therefore, it is important to prevent termite damage before it occurs. Chemical treatments are mainly used in Korea to control and prevent the damage. In foreign countries, physical barriers are also used to prevent entry to wooden buildings, along with chemical treatments. Physical barriers involve installing nets or particles that termites cannot pass through in the lower part of the building, around the pipes, and between the edges of the building or exterior walls and interior materials. Advantages of a physical barrier are that it is an eco-friendly method, maintains long-term effect after installation, and does not require the use of chemical treatments. Prior to applying physical barriers, studies into the characteristics of termite species must be undertaken. In this study, we evaluated the minimum passage size that each caste of Reticulitermes speratus kyushuensis can move through. We found that workers, soldiers, and secondary reproductive termites were able to pass through diameters of 0.7mm, 0.9mm, and 1.1mm respectively. Head height of termites was an important factor in determining the minimum passing size. Results from the current study will be used as a basis to design the mesh size for physical barriers to prevent damage by termites in historical wooden buildings in Korea.