• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.436-442
• /
• 2008

Graphite material has been recognized as a very competitive candidate for reflector, moderator, and structural material for very high temperature reactor (VHTR). Since VHTR is operated up to $900-950^{\circ}C$, small amount of impurity may accelerate the oxidation and degradation of carbon graphite, which results in increased porosity and lowered fracture toughness. In this study, ultrasonic wave propagation properties were investigated for both as-received and degradated material, and the feasibility of ultrasonic testing (UT) was estimated based on the result of ultrasonic property measurements. The ultrasonic properties of carbon graphite were half, more than 5 times, and 1/3 for velocity, attenuation, and signal-to-noise (S/N) ratio respectively. Degradation reduces the ultrasonic velocity slightly by 100 m/s, however the attenuation is about 2 times of as-receive state. The results of probability of detection (POD) estimation based on S/N ratio for side-drilled-hole (SDHs) of which depths were less than 100 mm were merely affected by oxidation and degradation. This result suggests that UT would be reliable method for nondestructive testing of carbon graphite material of which thickness is not over 100 mm. In accordance with the result produced by commercial automated ultrasonic testing (AUT) system, human error of ultrasonic testing is barely expected for the material of which thickness is not over 80 mm.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.94-104
• /
• 2017

This study carried out field evaluation by experts, monitoring by the public, and visitor satisfaction survey for 77 cases of utilization of cultural property projects that received support from "Living and Breathing Hyanggyo and Seowon" in 2016. The result was 'normal' for the comprehensive evaluation, and by section, 'good' for planning, operating, performance, outcome and annual special index. The field evaluation by experts was rated as 'good', monitoring by the public was 'good', and also 'good' for visitor satisfaction survey. The advantages of the project were as follows; increased chance for enjoyment of local cultural heritage, expansion of human network for utilization of local cultural heritage, utilization of cultural heritage as community place, diversification of educational contents by using cultural heritage. On the other hand, the disadvantages were as follows; decline of program's quality, shortage of putting plan in practice, insufficient interest and participation of local government, insufficient promoting, shortage of educational contents for free semester system. At last, we suggested measures to develop the project as follows; develop program by using local characteristics, develop programs for foreigner, training experts, increasing on-line promotion, develop new lecture technique, utilization of cultural heritage as a local community place, utilization planning by each space, improvement of evaluation system, tightening up reflection of visitor's opinions, consulting for each programs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.230-237
• /
• 2017

In this study, electrochemical methods were used to determine the optimum protection potential of S355ML steel for the cathodic protection of offshore wind-turbine-tower substructures. The results of potentiodynamic polarization experiments indicated that the anodic polarization curve did not represent a passivation behavior, while under the cathodic polarization concentration, polarization was observed due to the reduction of dissolved oxygen, followed by activation polarization by hydrogen evolution as the potential shifted towards the active direction. The concentration polarization region was found to be located between approximately -0.72 V and -1.0 V, and this potential range is considered to be the potential range for cathodic protection using the impressed current cathodic protection method. The results of the potentiostatic experiments at various potentials revealed that varying current density tended to become stable with time. Surface characterization after the potentiostatic experiment for 1200 s, by using a scanning electron microscope and a 3D analysis microscope confirmed that corrosion damage occurred as a result of anodic dissolution under an anodic polarization potential range of 0 to -0.50 V, which corresponds to anodic polarization. Under potentials corresponding to cathodic polarization, however, a relatively intact surface was observed with the formation of calcareous deposits. As a result, the potential range between -0.8 V and -1.0 V, which corresponds to the concentration polarization region, was determined to be the optimum potential region for impressed current cathodic protection of S355ML steel.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.447-458
• /
• 2007

The objective of this study is to provide faster mobile web service by improving performance of Contents Cache used for mobile web service in the existing Mobile Gate System. It was found that two elements existed in Mark-Up page transcoded by Contents Generator. One of the elements was dependent only on the requested DIDL page and Mark-Up type. The other was dependent on each of the requested DIDL page, Mark-Up type, size of mobile display 모바일 장치 to request service, type of images available and color depth count of the images available. The conventional Contents Cache saved the entire Mark-Up page to hold both of the two elements. This caused the problem where storage space was not effectively used because reusable elements were repetitively saved in cache memory domain due to change in one of the elements even though all the other elements were the same. As a result, a larger number of transcoded Mark-Up pages could not be saved in the same cache memory size. Therefore, in this study, Mark-Up pages transcoded by Contents Generator were divided into two elements and were separately saved. Also, in order to respond to the demand for replacing data in cache with new data, this study applied two algorithms of LFU and LRU. This study proposed the method to implement cache performance of faster speed by enabling to save more number of the transcoded Mark-Up pages in the same cache storage space.

• Microbiology and Biotechnology Letters
• /
• v.32 no.4
• /
• pp.334-340
• /
• 2004

This study was initially performed to obtain fundamental data on lichen distribution depending on environmental condiLichens distributed on coastal rocks atleast 20 m far away from the coast were also investigated. Analyof morphological characteristics and rDNA ITS clones revealed that lichens containing 9 families and 15 genera were distributed in coastal rocks of V-do, while lichens containing 10 families and 14 genera were in field rocks, demonstrating little difference of diversity between both sites. Foliose lichens such as PhaeophysPhyscia, Pyxine belonging to the family Physciaceae were representatives distributed in coastal rocks of V-do, along with Xanthoparmelia belonging to Parmeliaceae, fruticose lichens such as Ramalina to Ramaliand crustose lichen Lecanora to Lecanoraceae. In contrast, foliose lichen Cladonia belonging to the family Cladoniaceae, fruitcose lichen Stereocaulon to Streocaulaceae, and crustose lichen Porpidia to Porpidwere found only on the surface of field rocks. Crustose lichens containing genera Caloplaca, CanDirinaria, Graphis, Rhizocarpon, and Pertusaria were rarely distributed in coastal rocks, and most of them were also found in field rocks.

• Journal of The Korean Association of Information Education
• /
• v.23 no.6
• /
• pp.675-687
• /
• 2019

As interest in artificial intelligence increases, each university has been establishing a special graduate school with artificial intelligence major, and recently, the Korea government has established various support policies for artificial intelligence education. However, each university has a lot of difficulties because it has little experience in operating graduate education with the latest field of artificial intelligence and it is not easy to find experts. In this study, the response of graduate school students majoring in artificial intelligence was analyzed using IPA technique, and the direction of education of graduate school artificial intelligence major was searched. Among the 40 items surveyed by IPA, 12 items such as systematization of artificial intelligence curriculum, progress of class considering learning level, improvement of academic relations with guidance professors were extracted as items to be improved first. On the other hand, 8 items such as assistant capacity, and relationship with colleagues were overloaded, and twelve items such as instructor's lecture competency, appropriateness of educational contents, learner's artificial intelligence skills and knowledge, and attitude acquisition were to be maintained. In addition, eight items such as convergence education curriculum and diversity of education methods were all low in importance and performance. It is suggested that AI graduate school should be divided into two tracks(technical specialization, convergence expansion) by educational goal, and each track should be conducted by level-specific educational contents and methods suitable for student level. The curriculum should be elaborate and systematic to acquire AI knowledge, skills, and attitudes, and should have an individualized guidance system centered on excellent faculty members.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.367-376
• /
• 2012

The ironware production technology is a measure to fathom the society's level of development in time. To understand iron-manufacure methods in the past, various investigations on the fine structures and additions of ironware remains and Iron ingot have been conducted in a way of natural science. This study metallurgically reclassifies remains excavated in iron-manufacture remains located in Beokje, Goyang, which are thought to be in time of Goryeo Dynasty, and draws an inference from the element analysis on the iron-manufacture and smelting technology. Iron ingot samples with a cast iron structure are divided into those with a white cast iron structure and those with a grey cast iron rich in P. The P content of grey cast iron appeared to be the result of adding a flux agent like lime, iron ingot and carbon steel iron ingot with a cast iron structure excavated in the area is regarded as pig iron which was made without a refining process. In this study it seems that two methods of making ironware were used in the area; one is the method of making ironware by pouring cast iron to the casting, and the other is the method of making carbon steel through the refinement of pig iron. It appears that highly even steel structure of carbon steel and a small amount of MnS inclusion are very similar with that of the modern steel to which Mn is artificially added. Nevertheless, these data alone cannot be used to determine the source of Mn in the carbon steel of the excavated from the iron-manufacture remains, which raises the need for further studies on the source and the possibility of carbon steel via the iron-manufacture process of cast iron.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.2
• /
• pp.89-96
• /
• 2017

This study analyzed the characteristics of water quality and the correlation between Chl-a and water quality factors among four weirs located in the middle and downstream of Nakdong River for five years. The concentration of nutrients and Chl-a from DS to CH was higher than that of GG, which is considered to be due to the influx of Kumho River located at upstream of DS. There was a significant correlationship between Chl-a and most of the water quality factors for all season data. Based on the comparison results between all season data and summer season data, a negative correlation between Chl-a and nutrients ($PO_4-P$, $NH_3-N$) was increased. Based on analysis on summer in 2015 with relatively low precipitation and high algal blooms, the correlation between Chl-a and $PO_4-P$ at all sites were increased. Therefore phosphorus is an important factor in the river on summer season. And PCA results showed the first factor was classified as T-N, $NO_3-N$ for all seasons, and the first factor was classified as T-P, $PO_4-P$ for summer seasons. Consequently, the middle and downstream of Nakdong River were most affected by nutrients, especially it was affected by phosphorous pollutants rather than nitrogen pollutants during summer seasons.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.416-416
• /
• 2019

육상 담수는 대기중 이산화탄소($CO_2$) 배출의 중요한 발생원으로 주목되고 있다. 하천 및 강에서 대기중으로 배출되는 $CO_2$는 전 세계 탄소순환의 핵심요소이며, 대부분의 하천과 강은 $CO_2$로 과포화 되어있다. 세계적으로 하천 및 강의 $CO_2$ 배출량은 호수 및 저수지의 배출량보다 약 5배 많은 것으로 보고되고 있으나, 국내연구에서는 연구사례가 드물다. 따라서 본 연구의 목적은 낙동강 중하류에 위치해있는 강정고령보(GGW), 달성보(DSW), 합천창녕보(HCW), 창녕함안보(CHW)에서 발생되는 순 대기 배출 플럭스(Net Atmospheric Flux, NAF)의 동적 변동 특성을 분석하고, 데이터마이닝 기법을 적용하여 쉽게 수집할 수 있는 물리적 및 수질 변수로 $CO_2$ NAF를 추정하는데 사용할 수 있는 간략한 예측 모델을 개발하는데 있다. $CO_2$ NAF는 대기-수면 경계면에서의 $CO_2$ 부분압($pCO_2$)의 차에 기체전달속도를 곱하여 산정하였으며, 기체전달속도는 Cole and Caraco(1998)가 제안한 식을 사용하였다. 담수와 해수의 탄산염 시스템에서 열역학적 화학평형을 모두 고려한 $CO_2$SYS 프로그램을 사용하여 수중의 $pCO_2$를 산정하였고, $CO_2$ NAF는 Henry의 법칙과 Fick의 1차 확산법칙을 사용하여 계산하였다. $CO_2$ NAF의 시간적 변동성에 영향을 미치는 환경요인을 평가하기 위해서 상관분석, 주성분분석(Principal Component Analysis; PCA), 단계적다중회귀모델(Step-wise Multiple Linear Regression; SMLR), 랜덤포레스트(Random Forest; RF)방법을 사용하였다. SMLR 모델은 R package인 olsrr, RF 모델은 R package인 caret, randomForest를 이용하여 분석하였다. 연구 결과, 4개 보 상류 하천구간은 조류의 성장이 활발한 일부 기간을 제외한 대부분의 기간에서 $CO_2$를 대기로 배출하는 종속영양시스템(Heterotrophic system)을 보였다. $CO_2$ NAF의 중위값은 HCW에서 최소 $391.5mg-CO_2/m^2day$, DSW에서 최대 $1472.7mg-CO_2/m^2day$였다. 모든 보에서 NAF는 pH와 강한 음의 상관관계를 보였으며, $pCO_2$와 Chl-a도 음의 상관관계를 보였다. 이는 조류가 수중에서 $CO_2$를 소비하고 pH를 증가시키기 때문이다. PCA 분석 결과, NAF와 $pCO_2$가 높은 공분산을 보였으며, pH와 Chl-a는 반대 방향으로 군집되어 상관분석과 동일한 결과를 보였다. 이 연구를 통해 개발된 SMLR 모델과 RF 모델의 Adj. $R^2$ 값은 모든 보에서 0.77 이상으로 나왔으며, $pCO_2$ 측정 데이터가 없더라도 하천의 $CO_2$ NAF를 추정하는 방법으로 사용될 수 있을 것으로 평가된다.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.143-160
• /
• 2019

The domestic pharmacy market has undergone a lot of changes starting from the division of medicine. Along with the division of medicine, patients who had previously visited the pharmacy were moved to a hospital or clinic. As the pharmacy became more dependent on the illness and the clinic, the pharmacy began various activities to search for ways other than prescription drugs. At this time, the importance of distribution was emphasized around the time, and as the need to strengthen the competitiveness of pharmacies increased, they rapidly grew into the franchise market. Pharmacy franchise companies continue to lecture on academic management to strengthen the expertise of pharmacists' functions in line with the pharmacy market, which is different from ordinary franchise, in addition to private brand products for pharmacies, diversifying pharmacy handling items, And strengthening its market competitiveness. but research to support it are insufficient. As a research to help this, we analyzed factors affecting the intention of re-contracting and recommendation intention that affect the maintenance and expansion size of the drugstore franchise market. As a result showed the intention of re-contracting and the intention of recommending are affected by positive influence in brand trust. In addition, Brand Promise, Employee authenticity, Originality, Product excellence, Brand reputation, Brand identification, Educational Satisfaction were found to affect brand trust.