• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.343-350
• /
• 2009

In the present study, a new seismic retrofitting method that employs both a stainless steel wire mesh and a permeable polymer concrete mortar was proposed for reinforced concrete bridge piers with nonseismic design details. For this purpose, a total of six nonseismically designed bridge piers were tested under lateral load reversals. The test results reveal that nonseismically designed piers with lap splices need to be retrofitted to resist earthquake induced forces. In addition, it was proven that the proposed retrofitting method can be useful in improving the strength, stiffness, and energy dissipation capacities of bridge piers designed nonseismically. It is thus expected that the proposed method may provide an improved ductility capacity without sudden softening of strength for bridge piers excursing inelastic displacement range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6527-6535
• /
• 2014

This research aims is to confirm the effects of cultural competence of an action learning based teaching method in multicultural nursing education. Cultural competence was composed of cultural knowledge, cultural awareness and cultural acceptance. A total of 118 college students were enrolled in this study. Both before and after learning, the students were guided to fill out a questionnaire regarding culture competence. The students from each group studied multicultural nursing by different teaching types: the Traditional Lecture-based Teaching method (TLT) and Action Learning based Teaching method (ALT). Data analysis was carried out by SPSS 21.0. A pre-post comparison within the group was performed using a paired t-test and the comparison between groups was performed using ANCOVA. The results showed that there was a significant difference in the culture competence in both teaching methods. In addition, ALT showed higher cultural acceptance results than TLT; however, there was no difference in cultural knowledge and cultural awareness between the two groups Therefore, ALT should be considered as a teaching method to enhance cultural competence in multicultural nursing education for Nursing students. Further studies on instructional design according to the task types, nursing performance, and the validity of ALT will be needed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.121-127
• /
• 2012

This paper is to present the strength estimation of the cement mortar incorporating 20% of fly ash by equivalent age method. ASTM C 1074 was applied to achieve apparent activation energy($E_a$). Cement mortar was cured at the temperature of $5^{\circ}C$, $20^{\circ}C$ and $35^{\circ}C$ respectively to measure the setting time and compressive strength at designed age. According to test results, it is found that an increase in curing temperature resulted in an acceleration of setting time. $E_a$ was achieved to 34.75 KJ/mol. It was also found that by estimating strength development with Plowman and Gompertz model, good agreement between calculated value and measured one was achieved.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.330-330
• /
• 1998

Active belite cement clinkers were synthsized by using natural raw materials with borax and calcium phosphate ({{{{ {Ca }_{3 }( {PO}_{4}) }}2) In both case {{{{alpha ^、 {C }_{2 }S }} were formed but borax was more efficient. The cement syn-thesized with the addition of borax was hydrated with the addition of anhydrite(5 wt%) and slag(30wt%, 40wt% 50wt%) The addition of 50wt% slag with anhydrite was good for strength development in 7days and the compressive strength was developed to twice than no addition of slag at 28 days strength.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.30-37
• /
• 1991

제 2세대 bismaleimide의 일종인 Boots Technochemie 사의 Compimide 800을 매트 릭스 수지로 선정하여 여기에 촉매(DABCO 0.2wt%) 및 반응성 내충격성 증진제(TM 120; 15. 30, 60 part)를 첨가하여 Carbon/BMI 적층판($\pm$ 45。)2s를 만들어 인장 시험을 하여 in-plane shear하에서의 파단특성을 조사하였다, 이경우에 전단 탄성율을 망목상구조의 특성 에 의해 좌우되고 전단강도는 파단면의 형태와 밀접합 관계가 있다. TM 120을 30 part 첨 가한 경우의 전단강도가 가장 우수하였다

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.107-115
• /
• 1999

Microstructural variation and strengthening effects with lamination methods of alumina fiber-reinforced ${\gamma}$-LiAlO2 matrixes for Molten Carbonate Fuel Cell(MCFC) were studied. The porosities of all matrix laminated by hot-pressing of two green sheets under 1 kg/$\textrm{cm}^2$ at 45$^{\circ}C$ for 1 min and by double-casting which the second layer cast on the first green sheet dried for 3.5h were more than 50%. The strength of the Al2O3 fiber-reinforced matrix prepared by lamination was enhanced by 70% in comparison with the non-laminated matrix (115 gf/$\textrm{mm}^2$) and the strength-directionality due to fiber-orientation also could be removed. The strength of matrixes laminated by triple-casting was higher than that of the double-cast matrix, but triple-cast matrix showed the directionality with the casting direction, and furthermore its porosity was less than 50%. Although the strength of matrixes laminated by double-casting (195 gf/$\textrm{mm}^2$) is slightly less than that of matrixes laminated by hot-pressing (212 gf/$\textrm{mm}^2$), the double-casting method was evaluated to be more efficient laminating process in MCFC matrix processing.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.2
• /
• pp.23-29
• /
• 2016

This study was carried out with a view to increasing the tensile strength of sand soil and examined the characteristics of the tensile strength of sand soil reinforced by hair fiber which is environmentally friendly. The study investigated the change of the tensile strength and the stress-strain relationship varying the length of hair fiber, the amount of hair fiber, the amount of cement, and curing days. The test results indicated that the tensile strength increased significantly with hair fiber mixed. In addition, the sand soil mixed with hair fiber had larger displacement at failure. Based on the test results, it is appeared that the environmentally friendly hair fiber could be utilized practically to increase the tensile strength of sand soil in the future.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.10
• /
• pp.17-25
• /
• 2012

Shotcrete, rockbolt, and steel rib are installed to support ground after tunnel was excavated. These are important supports for NATM applied tunnels. Recently, lattice girder is increasingly used because it is easily installed. In this study, we developed a new lattice girder by increasing contacting area between spider and rod. To verify the effect of the new lattice girder, the 3-point and 4-point flexural strength tests were carried out for LG-$50{\times}20{\times}30$, LG-$70{\times}20{\times}30$, LG-$95{\times}22{\times}32$. As a result, in case of contacting area, strength of new SGS lattice girder is 17.95% higher than that of original lattice girder. In case of weakness point, strength of new SGS lattice girder is 19.37% higher than that of original lattice girder.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.473-480
• /
• 2012

In order to develop an effecive seismic strengthening metghod for existing concrete structure, structural tests of aramid FRP reinforced RC columns are performed. The test variables were strengthening methods of aramid sheet and strip. The test results were evaluated by comparing strength and energy dissipation capacities of non-reinforced and reinforced specimens. The test result comparison showed that aramid sheet reinforcement on RC column was evaluated as the most efficient way to increase strength and energy dissipation capacity.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.5.2-5.2
• /
• 2010

인체 경조직인 뼈와 치아는 콜라겐 단백질과 인산칼슘 무기질 성분으로 구성된 최적의 복합체라 볼 수 있다. 이러한 인산칼슘 무기질 성분은 결정학적, 화학적으로 hydroxyapatite (HA, Ca10(PO4)6(OH)2)와 거의 유사하여 높은 생체활성과 골전도성을 보이는 것으로 알려져 있다. 또한, hydroxyapatite의 고온 분해 산물로 볼 수 있는 tricalcuim phosphate(TCP, Ca3(PO4)2)는 체내에 이식시 체액에 용해되어 신생골을 유도하는 생체흡수성 세라믹스로 알려져있다. 이러한 HA와 TCP는 우수한 생체친화성에도 불구하고 기계적 특성이 낮아, non-load bearing 부위에 적용이 되어 다공질의 골수복재 용도로 활용되거나, load-bearing부위의 적용을 위한 금속 implant 등의 생체친화성 보완을 위한 표면 코팅재로 사용되고 있는 실정이다. 본 발표에서는 생체특성이 매우 우수한 인산칼슘 생체세라믹스의 load-bearing part 적용을 위하여 강도 및 파괴인성의 기계적 특성을 증진시킨 사례를 살펴보고, non-load bearing part에 실제 사용되는 인산칼슘 생체세라믹스의 다공질(porous) 골수복재(bone graft)의 역학 특성 증진을 위한 아이디어와 함께, 역학 특성이 매우 뛰어난 지르코니아 생체세라믹스의 강화-소결법에 대하여 소개하고자 한다.