• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

Wireless Sensor Networks is applied to improvement of life convenience or service like U-City as well as environment pollution, tunnel and structural health monitoring, storm, and earthquake diagnostic system. To increase the usability of sensor data and applicability, mobile devices and their facilities allow the applications of sensor networks to give mobile users and actuators the results of event detection at anytime and anywhere. In this paper, we present MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using Mobile devices) developed system for providing more efficient and valuable information services with a variety of mobile devices and network camera integrated to WSN. Our system is performed based on IEEE 802.15.4 protocol stack. To validate system usability, we built sensor network environments where were equipped with five application sensors such magnetic, photodiode, microphone, motion and vibration. We also built and tested proposed MUSNEMO to provide a novel model for event detection systems with mobile framework.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.211-218
• /
• 2018

Recently, various technologies related to IIoT are introduced continuously due to the spread of IoT and smart factory industries. This paper proposes the construction of a two-way wireless network system for monitoring plant equipment using these various technologies. The main technologies used in this thesis are design techniques for micro sensor nodes to monitor facility conditions at various sites, MQTT technology for wireless communication between local server and sensor nodes and Node-RED based design technologies, which store data collected and can be easily presented to users via wired and wireless wires. In addition, a wireless two-way camera system was also implemented in which the screen images of the site can be viewed in the situation room according to the instructions of the situation room when determining abnormal conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.221.2-221.2
• /
• 2012

우주물체 전자광학 감시체계(OWL: Optical Wide-field Patrol)는 관측소들의 자동운영을 통한 인공위성의 궤도정보추출이 목적이다. 이를 위해 각각의 관측소에서 매일 밤 운영되어야 하는 관측명령을 자동으로 생성하는 스케줄러를 개발하였다. 스케줄러는 OWL 본부가 설치될 한국천문연구원의 NOS(Network Operating System) 서버에 설치 운영된다. 스케줄러는 사용자가 정한 관측대상 인공위성의 관측우선순위와 OC(Orbit Calculation) 서브시스템이 제공한 위성궤도정보를 바탕으로, 시간에 따른 관측수행내용을 기록한 관측명령서(OCF: Observation Command File)를 작성한다. 작성된 OCF는 각 관측소가 관측을 시작하기 전까지 해당 관측소로 전달되며, 관측소는 OCF를 바탕으로 관측을 수행하게 된다. 스케줄러는 "제한조건반영" 및 "OCF작성" 등 2부분으로 구성된다. "제한조건반영"은 관측시스템의 특징을 스케줄러에 반영하는 단계로써 시야각 등 광학계의 특징, 필터 등 주변 장비의 특징, CCD 카메라의 노출대기시간 등 검출기의 특징 등이 이에 포함된다. 사용자는 장비의 교체 및 개선 등 관측시스템 변경이 발생하는 경우 "제한조건반영"에 이를 적용함으로써 스케줄러가 새로운 시스템에 쉽게 적용할 수 있다. "OCF작성"은 "제한조건반영"의 내용을 바탕으로 관측대상위성을 선정하는 , 위성 관측 구간 중 최대한 많은 노출 횟수를 산출하는 , 한 장의 영상에서 최대한 많은 궤도 정보를 획득하기 위한 등 3개의 알고리즘에 의해 OCF를 작성한다.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.35-44
• /
• 2005

The objectives of this study were to develop an image processing algorithm for finding the sick or the dead layers(SDL) rearing in the multi-tier layer battery, which is a core technology of remote monitoring systems for layers, and to test the performance of algorithm developed in the experimental poultry housing. Based on the literature study and experiment, the standing up of layer was set as a criterion for judging layers whether sick or dead. Then, by the criterion set, an algorithm was developed. The image processing algorithm developed was tested how well it could and SDL at the experimental poultry housing. Test results showed that its monitoring correctness of layers standing up in the cages having all healthy layers was $92\%$, and $96\%$ in the cages having SDL. Therefore, it would be concluded that the image processing algorithm developed in this study was well suited to the purpose of development.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.87-98
• /
• 2011

Detecting a moving object from videos and tracking it are basic and necessary preprocessing steps in many video systems like object recognition, context aware, and intelligent visual surveillance. In this paper, we propose a method that is able to detect a moving object quickly and accurately in a condition that background and light change in a real time. Furthermore, our system detects strongly an object in a condition that the target object is covered with other objects. For effective detection, effective Eigen-space and FCM are combined and employed, and a CONDENSATION algorithm is used to trace a detected object strongly. First, training data collected from a background image are linear-transformed using Principal Component Analysis (PCA). Second, an Eigen-background is organized from selected principal components having excellent discrimination ability on an object and a background. Next, an object is detected with FCM that uses a convolution result of the Eigen-vector of previous steps and the input image. Finally, an object is tracked by using coordinates of an detected object as an input value of condensation algorithm. Images including various moving objects in a same time are collected and used as training data to realize our system that is able to be adapted to change of light and background in a fixed camera. The result of test shows that the proposed method detects an object strongly in a condition having a change of light and a background, and partial movement of an object.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.67-71
• /
• 2011

Existing face detection systems, which are used for digital door locks, digital cameras, video surveillance systems, and so on, are software-based implementation for relatively low level resolution images. Therefore, in this case, there are difficulties in detecting faces in a real-time fashion due to the increasing amount of operational processing as well as in allowing the requirements of face detections for HD(High Definition) resolutions. A hardware approach is necessary to efficiently find faces for HD images in real-time embedded systems. This paper proposes and implements a hardware architecture for an LBP(Local Binary Pattern) operation which is a time-consuming part as one of preprocessing steps for face detection. The hardware architecture proposed in this research has been implemented and tested with a FPGA(Field Programmable Gate Array) chip, and shown that the approach guarantees efficient face detection for HD images.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2020

The thermal image device support image to detect infrared light from the object without light. It can use not only defence-related industry, but also civilian industry. This paper presents a new thermal image processing module using common image processor. The proposed module shows 10~20% performance improvement with normal mode and 50% performance improvement with sleep mode compared with the previously thermal image module based FPGA. and it guarantees high scalability according to modular system. In addition, the proposed module improves modulation and reuse, so it expect to have reduction of development period, low development cost. various application. In addition, it expect to have satisfaction of customer requirements, development design, development period, release date of product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.24-32
• /
• 2010

In this paper we proposed an object tracking system that detects the abandoned and removed objects, which is to be used in the intelligent surveillance applications. After the GMM based background subtraction and by using histogram method, the static region is identified to detect abandoned and removed objects. Since the system is implemented on DSP chip, it operates in realtime and is programmable. The input videos used in the experiment contain various indoor and outdoor scenes, and they are categorized into three different complexities; low, midium and high. By 10 times of experiment, we obtained high detection ratio at low and medium complexity sequences. On the high complexity video, successful detection ratio was relatively low because the scene contains crowdedness and repeated occlusion. In the future work, these complicated situation should be solved.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.115-121
• /
• 2018

Fluorescent images using near-infrared light have no worry about radioactivity, and images can be checked in real time during surgery. Therefore experiments using fluorescent images for monitoring lymph node biopsy are actively under way. Fluorescent imaging equipment uses high heat-generating components such as LED and camera, thus uses water-cooling system as a stable heating suppression means. However in the fluorescent image equipment, the water cooling system takes a large volume which is a disadvantage in terms of miniaturization of the equipment. Even if the air cooling system is used for miniaturizing the equipment, heat generation is a problem. In this paper, we have experimented with the air cooling method using PWM control for the miniaturization of the equipment, and confirmed the constant quality of the fluorescent image and the suppression of the heat generation without any problems even when the equipment is used for a long time.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.149-162
• /
• 2005

This paper suggest a way to detect a specific wanted figure in public places such as subway stations and banks by comparing color face images extracted from the real time CCTV with the face images of designated specific figures. Assuming that the characteristic of the surveillance camera allows the face information in screens to change arbitrarily and to contain information on numerous faces, the accurate detection of the face area was focused. To solve this problem, the normalization work using subsampling with $20{\times}20$ pixels on arbitrary face images, which is based on the Perceptron Neural Network model suggested by R. Rosenblatt, created the effect of recogning the whole face. The optimal linear filter and the histogram shaper technique were employed to minimize the outside interference such as lightings and light. The addition operation of the egg-shaped masks was added to the pre-treatment process to minimize unnecessary work. The images finished with the pre-treatment process were divided into three reception fields and the information on the specific location of eyes, nose, and mouths was determined through the neural network. Furthermore, the precision of results was improved by constructing the three single-set network system with different initial values in a row.