• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.19-24
• /
• 1999

$In_2O_3$-based thick films for the ozone detection of ppb range have been investigated. The $In_2O_3$ sensing layer is quite sensitive to ozone, but the saturated stable sensitivity cannot be obtained at the ozone exposure of 100 ppb for 5 min. The addition of $Fe_2O_3$ into $In_2O_3$ indicates some improvement in response time and sensitivity, but it seems the improvement is not good enough for real applications. Firing of $In_2O_3$:$Fe_2O_3$ powder induces remarkable improvement in response and recovery, although the sensitivity decrease. The sensing layer fired at $1300^{\circ}C$ and operated $550^{\circ}C$ shows excellent properties of fast response time, saturated stable sensitivity and rapid recovery characteristics to 100 ppb ozone exposure for 5 min. Especially, it shows the reproducibility of the sensor signal for repeated measurements and the linearity between the ozone concentration and the sensor resistance. The preliminary results clearly demonstrated that the sensor can be successfully applied for the ozone detection of ppb range.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.57-65
• /
• 2015

Electronic packages consist of various materials, and as temperature changes, warpage occurs because of the difference in coefficient of thermal expansion. Shadow $moir{\acute{e}}$ is non-contact, whole field measurement technique for out-of-plane displacement. However, the technique has low sensitivity above $50{\mu}m/fringe$, it is not adequate for the warpage measurement in some circumstance. In this paper, by applying phase shifting process to the traditional shadow $moir{\acute{e}}$, measurement system having enhanced sensitivity of $12.5{\mu}m/fringe$ is constructed. Considering Talbot effect, the measurement is carried out in the half Talbot area. Shadow fringe pattern having four times enhanced sensitivity is obtained by the image process with four shadow fringes. The measurement technique is applied to the fibered package substrate and coreless package substrate for measuring warpages at room temperature and at about $100^{\circ}C$.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.89-99
• /
• 2015

This study investigated the correlation between the characteristics of collimator in accordance with the efficiency of detecting photon signals and the quantitative analysis of the lung function, thereby assessing the possibility of clinically applying high sensitivity lung ventilation SPECT. From March to May, 2014, 10 subjects in normal volunteers underwent an ultra high resolution, high resolution and high sensitivity collimator planar scan and SPECT. The experiment showed that compared with the collimator scan, the quantitative analysis results were significant (p=0.89), and compared to the high resolution collimator SPECT, the time was reduced by 4.9 fold. Therefore, the lung ventilation SPECT that had not been used due to an undermined effectiveness can offer usefulness when clinically applied if a high sensitivity collimator is used since the quality and quantity of information and the duration of scan time all offer an improvement.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.505-513
• /
• 1993

To make the electrophotographic photoreceptor that srnsirizes for panchromatic matcrial, the dying element of sunfasr yellow which has an absorption ivavclength at near 400nm, and $\alpha,\beta$-copper phthalocyaninc dying elements with 700nm absorption wavelength were adsorbed and then dispersed onto the zine oxide(Zn0). In ordcr to characterize rhe change In sensitivity the various binders and different mole ratio of ZnO to binder were employed in here. It was found rhat the optimum sensitivity was obtained with 5.5 ratio. I;rom the measurements of electrostatic and spectral sensitivity, it was found that the maximum photographic properties were obtained for mixing the sunfast yellow and $\beta$-copper phthalocyaninr. In this case the electrophotographic sensiri\ity was found to he $E{1:2}$= 1440 lux . sec. And also the spectral sensitivity shows that it had a good properties for panchromatic matcrial.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.

• Journal of Korean Society of Archives and Records Management
• /
• v.3 no.2
• /
• pp.143-155
• /
• 2003

As archives, photograph is the evident records of historical facts and experiences. Thus, it is worth preserving. Unlike other documents silver halide photographic films and prints are quite sensitive to environmental factors such as light, temperature and humidity, which demands careful treatment in preservation. This study was carried out to select popular photographic films and papers on the market, to examine their photographic speeds (or sensitivities) and to compare and analyze their preservative features after keeping them some time in a weather-o-meter. Consequently, B/W materials were superior to color ones in preservation. And films were better than papers in the same manner. But we were not able to observe remarkable differences among material's manufacturers.

• Composites Research
• /
• v.27 no.4
• /
• pp.141-145
• /
• 2014

This paper presents a structural health monitoring method using piezoelectric paint sensor designed for an impact sensor. The piezoelectric paint sensor can be flexibly deposited onto most structural surfaces in a thin form of the paint, and measure impact signals without any external device such as a power amplifier. In this study, a composite plate having four zones coated with piezoelectric paint was used for impact monitoring test. The sensitivity of the piezoelectric paint sensor was obtained by measuring the output voltages against the impact force. In addition to the sensitivity measurement, the impact position has been also estimated by comparing the output signals of the paint sensors when the impact occurs on the specimen.

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.483-493
• /
• 2008

For effective wireless localization utilizing signal strength measurements based on IEEE 802.11 WLAN standard diversity of mobile hardware, characteristics of is one of the important problems to be considered for advanced location-based services. For improved accuracy regardless of a bias originating from the mobile hardware characteristics, this paper proposes a new localization algorithm, which is named as the hybrid Kriging algorithm. To evaluate the performance characteristics of the proposed algorithm, simulation and experiment results are illustrated. By the simulation and experiment result, the proposed algorithm is more accurate than the well-known location finger-print method given the same density of reference measurements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.265-268
• /
• 2011

In this paper, we designed and fabricated that fog alarm equipment detected to crew in maritime fog. Developed fog alarm equipment was combined sensor and a transmitter-receiver module using emitting device unit and receiver photoelectric element infrared LED using only the receive sensitivity was low, miniaturization. Experiment of the fabricated device had a standard that was humidity 70%, the fabricated one generating artificial-fog within visibility 1km. When humidity is over 70%, the fabricated one generates alarming sounds for a warning. When developed device apply to vessel will be able to respond quickly, according to dense fog in the accident.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2111-2113
• /
• 2001

본 논문에서는 MEMS 기술에 의해 제작된 마이크로 가속도계를 위한 신호 검출 및 처리회로를 설계 제작하였으며, 레이트 테이블을 이용한 실험을 통해 제작된 센서 및 신호처리회로의 성능을 시험하였다. 본 논문에서 제시한 가속도계는 입력 가속도에 따라 용량이 변하는 방식으로, 두개의 김블 구조를 가지므로 타축 입력 가속도의 영향을 적게 받는 장점이 있다. 또한 감지전극의 효과적 배치를 통해 감도가 커지도록 설계되었다. 신호검출 및 처리는 여기 신호를 이용한 차분검출방식을 이용하였다. 이 방식은 구성이 복잡한 단점이 있으나, 잡음 신호와 검출 신호를 주파수 영역에서 분리시킬 수 있으며, 기생용량의 영향을 감소시키고 전기적 감도를 증가시키는 장점이 있다. 실험을 통해 제시한 신호검출 및 처리방식을 이용할 경우 가속도계의 성능이 향상되는 것을 확인하였다.