• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.809-812
• /
• 2008

Bleed test methods currently being specified in KS, ASTM and BS are the methods to read the height of bleed water and volume changes of mortar poured into transparent cylinder. Time for measuring of bleed are specified as 3, 20 hours in KS specification, while bleed is measured at 3 hour and change of volume is measured at 24 hour in ASTM and BS specification. Like these, bleed test takes a lot of time to conduct. Another method to measure the bleed is the pressure filter test. This method predict the bleed by measuring the passed water through the fiber glass filter under pressure. This pressure filter test developed by Schupack in 1971 has an advantage in predicting the bleed in shorter time. However, data correlating the pressure filter test results with amount of bleed are limited. Therefore, this study aims at verifying the availability of pressure filter test as a method to predict the bleed and deriving the relation between this test results and bleed.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.63-67
• /
• 2016

In this paper, we present an indirect method of elastic modulus measurement for various lamination layers formed on polymer-based compliant substrates. Although the elastic modulus of every component is crucial for mechanically reliable microelectronic devices, it is difficult to accurately measure the film properties because the lamination layers are hardly detached from the substrate. In order to resolve the problem, 3-point bending test is conducted with a film-substrate specimen and area transformation rule is applied to the cross-sectional area of the film region. With known substrate modulus, a modulus ratio between the film and the substrate is calculated using bending stiffness of the multilayered specimen obtained from the 3-point bending test. This method is verified using electroplated copper specimens with two types of film-substrate structure; double-sided film and single sided film. Also, common dielectric layers, prepreg (PPG) and dry film solder resist (DF SR), are measured with the double-sided specimen type. The results of copper (110.3 GPa), PPG (22.3 GPa), DF SR (5.0 GPa) were measured with high precision.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.41-47
• /
• 2007

Crude copper phthalocyanine (Cupc) was synthesized by Wyler process, then grounded using various methods such as acid pasting, kneader, attritor and SC-mill. Particle size, shape and crystalline structure were compared and evaluated after particle size reductions. Cupcs prepared by acid pasting and kneader methods that are excellent manufacturing processes in industry were used as our standards. Particle properties of Cupcs prepared either by attritor or by SC-mill were compared with particle size analyzer, scanning electron microscopy (SEM) and X-ray diffraction (XRD). Particle size analyzer and SEM were used to analyze the variation of particle sizes of Cupc with milling time. Particle size was initially decreased up to the 90 min of milling time, thereafter it reversely began to increase in case of SC-mill. Cupc obtained from dry milling with attritor displayed strong cohesion so that particle size was not possible to determine with particle size analyzer. However, the optimum milling time was indirectly approximated from the analysis of XRD peak intensity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.88-88
• /
• 2022

하천법 개정 및 수자원의 조사·계획 및 관리에 관한 법률 제정으로 하상변동조사를 정기적으로 실시하는 것이 의무화 되었고, 지자체가 계획적으로 수자원을 관리할 수 있도록 제도가 마련되고 있다. 하상의 지형측량은 직접 측량할 수 없기 때문에 수심 측량을 통해 간접적으로 이루어지고 있으며, 그 방법은 레벨측량이나 음향측심기를 활용한 접촉식으로 이루어지고 있다. 접촉식 수심측량법은 자료수집이 제한적이기 때문에 공간해상도가 낮고 연속적인 측량이 불가능하다는 한계가 있어 최근에는 LiDAR나 초분광영상을 이용한 원격탐사를 이용한 수심측정 기술이 개발되고있다. 개발된 초분광영상을 이용한 수심측정 기술은 접촉식 조사보다 넓은 지역을 조사할 수 있고, 잦은 빈도로 자료취득이 용이한 드론에 경량 초분광센서를 탑재하여 초분광영상을 취득하고, 최적 밴드비 탐색 알고리즘을 적용해 수심맵 산정이 가능하다. 기존의 초분광 원격탐사 기법은 드론의 경로비행으로 획득한 초분광영상을 면단위의 영상으로 정합한 후 특정 물리량에 대한 분석이 수행되었으며, 수심측정의 경우 모래하천을 대상으로 한 연구가 주를 이루었으며, 하상재료에 대한 평가는 이루어지지 않았었다. 본 연구에서는 기존의 초분광영상을 활용한 수심산정 기법을 식생이 있는 하천에 적용하고, 동일지역에서 식생을 제거한 후의 2가지 케이스에 대해서 시공간(Spatio-temporal)초분광영상과 단면초분광영상에 모두 적용해 보았다. 연구결과, 식생이 없는 경우의 수심산정이 더 높은 정확도를 보였으며, 식생이 있는 경우에는 식생의 높이를 바닥으로 인식한 수심이 산정되었다. 또한, 기존의 단면초분광영상을 이용한 수심산정뿐만 아니라 시공간 초분광영상에서도 수심산정의 높은 정확도를 보여 시공간 초분광영상을 활용한 하상변동(수심변동) 추적의 가능성을 확인하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.291-301
• /
• 2015

This study compared the in vitro cell viability and differentiation potentials of human deciduous dental pulp cells (DPCs) on mineral trioxide aggregate (MTA)-like products (ProRoot MTA, RetroMTA and Endocem Zr). The experimental materials were prepared as circular discs, which were used to test the effects of the materials on the viability of human DPCs when placed in direct and indirect contact. Furthermore, the pH of the extracted materials was recorded, and their effect on cell differentiation potential was evaluated by evaluating the alkaline phosphatase (ALP) activity and Alizarin Red S staining of DPCs incubated with the test materials. In direct contact, the cell viability of human DPCs was higher with ProRoot MTA and RetroMTA than with Endocem Zr. However, when in indirect contact, the cell viability of human DPCs was generally higher in Endocem Zr than in ProRoot MTA and Retro MTA. With respect to pH, the alkalinity was lower for Endocem Zr than for the other test materials. The ALP activities of the cells were not enhanced by any of the experimental materials. Alizarin Red S staining of the tested human DPCs revealed that their differentiation potential was lower than for cells incubated with osteogenic induction medium. While there were differences in the responses of the human DPCs to the test materials, all displayed degrees of cytotoxicity and were unable to enhance either the viability or differentiation of human DPCs. However, Endocem Zr exhibited better cell viability and was less alkaline than the other test materials.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.510-514
• /
• 2007

This study was carried on cool and RT(room temperature) storage of unhulled rice. In RT storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and breakdown, setback and protein content. high significant negative coefficients were showed setback and breakdown, breakdown and protein content. In cool storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and amylose content and gelatinization start temperature and protein content and high significant negative coefficients were showed toyo index and whiteness, toyo index and gelatinization start temperature, gelatinization start temperature and amylose content. In RT storage of a path coefficient analysis, a highest positive direct influence was observed in amylose content and a highest negative direct influence was protein content. Positive indirect influence was high revealed breakdown and protein content and negative indirect influence was gelatinization start temperature and Mg/K ratio. In cool storage of a path coefficient analysis, a highest positive direct influence was whiteness and a highest positive indirect influence was gelatinization start temperature. Positive indirect influence was high revealed gelatinization start temperature and amylose content, negative indirect influence was whiteness and gelatinization start temperature. In RT storage of Multiple regression equation of Toyo index based on physicochemical properties of unhulled rice, a highest coefficient of determination was revealed among five facters of whiteness, protein content, Mg/K ratio, amylose content and gelatinization start temperature. In cool storage of Multiple regression equation of toyo index based on physicochemical properties of unhulled rice, highest coefficient of determination was revealed among five facters of moisture content, amylose content, gelatinization start temperature, breakdown and setback.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.385-394
• /
• 2007

The objective of this study was to estimate social cost on rehabilitation of existing water pipes by investigating the willingness-to-pay (WTP) of residents at INJE County to avoid the loss and inconvenience of transportation and business resulting from the sudden failure and leaks of old water pipes. Contingent valuation method was used through conducting survey to 180 residents in Inche County, with questions of double-bounded dichotomous choice. The resulting WTP of residents at Inche was 7,682 won/month/household. The annual social cost could be estimated as 960 million won, which might be caused by the failure of the old water pipes at INJE County.

• Electrical & Electronic Materials
• /
• v.6 no.5
• /
• pp.407-416
• /
• 1993

무산소동을 안정화 모재로한 Cu/Nb-Ti 빌렛트를 제작한 다음 간접 열간방식의 압출에 의해 얻어진 봉재를 인발한 후 신선과 열처리를 반복하여 단심 및 다심 Nb-Ti 초전도 선재를 제조하였다. 가공 조직을 조사한 결과, 단심 선재의 경우 Nb-Ti 심의 단면이 균일하게 가공된 것을 확인하였으며 다심선재의 경우는 신선가공에 의하여 다소 불균질한 필라멘트부분이 관찰되었다. 4.2K, 자장하에서 4단자법으로 직선형 단척시료의 임계전류를 측정하여 가공 열처리 조건에 따른 임계전류밀도의 자장특성을 조사하였는데 열처리시간을 길게하고 가공도를 높인 시료일수록 자장하의 임계전류밀도가 높게 나타나는 것을 확인하였다. 4.2K, 5T 자장하에서 각각 4 x $10^{5}$A/$cm^{2}$ 및 2 x $10^{5}$A/$cm^{2}$의 임계전류밀도를 나타내는 Nb-Ti 단심 및 다심 초전도선재를 제작 할 수 있었다.있었다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.266-269
• /
• 2006

현대사회에서 축전지라 불리우는 2차 전지는 그 용도가 중요하지만, 비선형적이고 다양한 파라메타에 따른 복잡한 특성 때문에 그 사용법에 있어서 발전에 제한을 받아왔다 [1][2]. 각 배터리셀의 건강상태(SOH)를 실시간으로 정확히 파악하는 것은 장비의 안정된 운전과 원활한 축전지관리를 위하여 필수적이다. 본 논문에서는 축전지의 내부컨덕턴스를 측정하는 간접적인 방법에 의하여 장비의 운전이나 축전지의 수명에 영향을 주지 않고 축전지의 건강상태(SOH)를 실시간으로 진단하는 방법을 제시하고, 실제로 120개의 축전지에 대한 컨덕턴스 자료에 의하여 건강상태를 진단하고 교체시기를 판단한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.394-399
• /
• 2002

국민소득의 증대와 함께 소비자의 고품질 농축산물에 대한 수요와 관심이 날로 증가하고 있다 이에 따라 안전하며 고품질인 농축산물을 소비자에게 공급하기 위하여 안전한 농축산물의 생산, 신선도 유지를 위한 유통구조의 개혁, 품질 및 안전성 평가기술개발을 위한 노력이 보다 더 요구되고 있다. 소비자가 믿고 구매하기 위해서는 농축산물에 대한 품질보증이 필수적이며 이를 위해서는 신속하고 정확한 품질 및 유해물질의 판정기술 개발이 필요하다. 많은 농축산물에 있어서 주요 품질인자인 숙도 및 신선도의 변화는 휘발성 화학물질로 이루어진 냄새의 변화로 나타나므로 이를 측정하여 품질 및 안전성을 간접적으로 판정할 수 있다 기존의 냄새에 의한 품질 판정은 판별전문가에 의한 관능평가법 또는 GC(Gas Chromatography)나 GC/MS(Gas chromatograph mass spectrometer)에 의하여 주로 이루어져 왔다. 하지만, 관능평가법의 경우 판별전문가의 개인적인 차이, 피로, 건강상태 등에 따라 판정의 객관성이 떨어질 우려가 있고, GC나 GC/MS를 이용할 경우 냄새분석에 많은 시간과 노력이 소요되는 문제점이 있다. (중략)