• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.455-460
• /
• 2008

본 연구에서는 1997년 1월부터 2006년 12월까지의 기상청에서 제공하는 31개 자동기상관측망(AWS: Automatic Weather Stations)에 의한 지표 근처 기온($^{\circ}C$) 및 강수(mm) 자료를 이용하여 서울 지역 기상인자의 시 공간 구조 분석 및 변화경향과 변이성을 도출하였다. 미관측지점의 값을 추정하기 위하여 주변 관측지점들을 고려하여, 그 영향은 거리에 반비례함을 반영하는 공간통계학적 방법 중 IDSW(Inverse Distance Squared Weighing:거리자승역산가중)를 적용하여 보관하였다. 그 결과 서울시의 기온과 강수량 모두 1997년에 비해 2006년의 기온이 약 $1.03^{\circ}C$, 강수량이 약 483mm 증가한 것으로 나타났다. 기후변이성의 특성은 과거 10년 동안 기온의 경우 산림지역에서는 변화의 폭이 높게 나타났으며, 시간이 지나면서 감소하는 경향을 보였다. 주거 지역의 경우 변화이 폭이 낮게 나타났으며, 시간이 지나면서 증가하는 경향을 보였다. 그러나 강수량의 경우 산림지역과 주거지역의 변이성의 차이가 나타나지 않았다.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.472-478
• /
• 1996

It was conducted to compare the availabilities of parameters for evaluating the sink capacity of the broad leaves trees such as Acer saccharium, Ailanthus altissima, Ginkgo biloba, Platanus occidentalis and Salix pseudolasiogyne. These trees, repoted as resistant species to air pollutants, were exposed to $SO_2$, $NO_2$ and CO within a phytotron at $25^{\circ}C$ with 70% of relative humidity. Since the amount of ad- or absorbed gas does not always agree with the amount of accumlated pollutants in leaves and with the stomatal density, it is assumed that the amount of ad- or absorbed gas is the most basal index to evaluate the sink capacity of trees. The stomatal diffusive resistance, which has a good agreement with the amount of ad- or absorbed gas, is also available for evaluating the sink capacity of broad leaves trees.

• Journal of Wetlands Research
• /
• v.18 no.2
• /
• pp.148-153
• /
• 2016

Hydraulic and hydrological flood routing methods are commonly used to analyze temporal and spatial flood influences of flood wave through a river reach. Hydrological flood routing method has relatively more simple and reasonable performance accuracy compared to the hydraulic method. Storage constant used in Muskingum method widely applied in hydrological flood routing is very similar to the travel time. Focusing on this point, in this study, we estimate the travel time from HEC-RAS results to estimate storage constant, and develop a non-linear regression equation for the travel time using reach length, channel slope, and discharge. The estimated flow by Muskingum model with storage constant of nonlinear equation is compared with the flow calculated by applying the HEC-RAS 1-D unsteady flow simulation. In addition, this study examines the effect on the weighting factor changes and interval reach divisions; peak discharge increases with the bigger weighting factor, and RMSE decreases with the fragmented division.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.435-435
• /
• 2023

최근 기후변화의 영향으로 상대적으로 좁은 국가면적이라 할 수 있는 국내에서도 가뭄과 홍수가 지역적으로 동시에 발생하는 등 자연재해에 의한 피해가 빈번해지고 있다. 이 중 가뭄은 타 풍수해에 비하여 일반적으로 장기간의 무강우에 의해 발현되고, 피해가 발생할 경우 생활용수, 농업용수, 공업용수 등 다양한 지역의 용수사용특성에 따라 피해가 집중 및 가중되는 특징을 지닌다. 본 연구에서는 지역별 가뭄피해도에 영향을 주는 영향인자의 민감도 분석을 실시하고 그 결과를 분석하였다. "가뭄 피해도"는 용수별 직간접 피해의 정도를 점수 또는 등급 등의 정량적으로 나타낸 것으로 정의된다. 우선, 국가가뭄정보통계집(2018-2020)에서 제시된 지역별 가뭄피해정보자료와 용수사용특성을 기반으로 군집분석을 실시한 문기훈(2022)의 연구모형을 기반으로 최근 발행된 2021년의 피해정보를 추가적으로 반영하여 군집분석을 실시하였다. 그리고 지역별 가뭄피해도 군집등급에 영향을 주는 과거 피해인자와 용수사용특성을 함수화하고, 지역별 불확실성을 반영한 민감도 분석을 실시하였다. 분석 결과 지역별 과거의 가뭄피해경험여부 및 용수사용특성의 변동에 따라 지역적 가뭄피해도 군집등급이 달라짐을 확인할 수 있었다.

• Journal of Welding and Joining
• /
• v.8 no.1
• /
• pp.31-42
• /
• 1990

Arc must be stable during welding first of all other factors for obtaining sound weldment, especially in the automation of welding process. Arc stability is somewhat sophisticated phenomenon which is not clearly defined yet. In consumable electrode welding, the voltage and current variation due to metal transfer enables to assess arc stability. Recently, statistical analyses of the voltage and current waveform factors are performed to assess the degress of arc stability which is assessed and controlled by operator's own experience by now. But, considering the increasing need and the trend of automation of welding process, it is necessary to monitor arc stability in real-time. In this sutdy, the modified stability index composed of two voltage and current wvaeform factors (arc time and short circuit time) reduced from four factors (arc time, short circuit time, average arc current and average short circuit current) in Mita's index by the welding electrical circuit modeling is proposed and verified by experiments to be well estimating arc stability in the static sense. Also, the recursive calculation form estimating present arc stability in the dynamic sense is developed for real-time estimation. The results of applying the recursive index during welding show good estimation of arc stability in real-time. Therefore, the results of this study offers the mean for real-time control arc stability.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.367-373
• /
• 1994

It is necessary to adopt a simple signal validation for avoiding the complexity of algorithm and verification in the design process of the instrumentation and control system in nuclear plants. This paper suggests a signal validation method developed on the basis of consistency checking for the multi-channel measurement system without any analytic process model. It includes a simplified algorithm for estimating the fixed bias error of each channel and a weighted averaging method. The weighting factor of each channel is updated according to its calculated bias error. The developed method has been tested to verify its performance through several input scenarios.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.744-749
• /
• 2011

In this study, determination method of initial optimal nozzle expansion in pintle rocket was investigated. The initial optimal initial nozzle expansion was decided by maximizing the mass-averaged thrust coefficient that is calculated from thrust coefficient of minimum and maximum chamber pressure. The determination of initial optimal initial nozzle expansion was equivalent to that of the minimum propellant mass which was required for obtaining the desired mission performance. The highest pressure, thrust turndown ratio and total impulse ratio effected on the initial optimal nozzle expansion. Among them, total impulse ratio had great influence on the initial optimal nozzle expansion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1182-1186
• /
• 2006

The decision of design flood in river basins is very important in the aspect of flood control. The design flood of rivers was estimated according to the size and importance of basins. As the damage of floods increases more and more and the importance of defense against floods increases further, the presumption of design flood can be very important. Especially, what influences most greatly flood is rainfall. However, in spite of equal rainfall, the estimated flood differ according to the features of basins. The fact that the features of basins influence greatly the estimation of flood was confirmed by the preceding research results and experiences. However, although many rivers have their own basin features, the research on how these basin features are related to the estimation of design flood, is not yet sufficient. The purpose of this study is to identify how the design flood estimated previously by river arrangement basic plan is correlated with topography factors, and so investigate the correlation between basin topography factors and design flood in order to provide the additional information for the unmeasured basins or the middle/small river basins where their river plan is not established.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.1
• /
• pp.9-23
• /
• 1997

A numerical study of a two-layer, stratified flow is investigated, using the implicit finite difference method in one dimension. The results of computational method have been tested and, in case of lock exchange flow, compared with the results of experimental data. The results of model experiments with various interfacial, bottom friction coefficients along with various time weighting factor of numerical scheme and dissipative interface are shown and discussed. Two-layer model experiment has been also carried out to investigate the generation and propagation characteristics of internal tidal wave over the steep bottom topography under stratified condition. The internal wave seems to well radiate through the downstream boundary under the experiments adopting radiation conditions both at two layers and only at upper layer, confirming the applicability of radiational boundary condition in stratified flows. It is also shown that the internal wave through the downstream boundary propagates more actively with increasing thickness of lower layer in the downstream. This implies that the potential tidal energy in the interface will depend upon the thickness of lower layer for the constant thickness of upper layer.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.533-538
• /
• 1993

The Wx protein, known as starch synthase or starch glucosyl transferase (E.C. 2.4.1.11), is responsible for the amylose synthesis. In an effort to explain the mechanism of amylose biosynthesis, the starch synthase known as Wx protein was identified by analyzing the various wx rice mutants with SDS-PAGE of proteins extracted from rice starch. Finally, the 66 kDa protein was purified by extracting the starch-bound protein fractions followed by Suprose 12 gel filtration chromatography.