• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.187-193
• /
• 2002

IGCC (Integrated Gasification Combined Cycle) power plant is becoming more attractive because it allows that various fuels like coal, heavy oil md even residue oil and wood are used in a gas turbine. This paper presents a prediction of performances of gas turbine when low caloric value syngas fuels produced from the IGCC is used in it originally designed with natural gas fuel. Using a systemic method which predicts a gas turbine behavior with limited design data, when natural gas, design fuel and four other types of syngas are used in GE 7FA gas turbine, its performances are predicted on design and off-design conditions.

• Clean Technology
• /
• v.18 no.4
• /
• pp.426-431
• /
• 2012

Carbon-rich coal can be utilized as a fuel for direct carbon fuel cell (DCFC). However, left-behind ash after the electrochemical oxidation may hinder the electrochemical reactions. In this study, we produced ash-free coal (AFC) by thermal extraction and then tested it as a fuel for DCFC. DCFC was built based on solid oxide electrolyte and the electrochemical performance of AFC mixed with $K_2CO_3$ was compared with AFC only. Significantly enhanced power density was found by catalytic steam gasification of AFC. However, an increase of the power density by catalytic pyrolysis was negligible. This result indicated that a catalyst activated the steam gasification reactions, producing much more $H_2$ and thus increasing the power density, compared to AFC only. Results of a quantitative analysis showed much improved kinetics in AFC with $K_2CO_3$ in agreement with DCFC results. A secondary phase of potassium on yttria-stabilized zirconia (YSZ) surface was observed after the cell operation. This probably caused poor long-term behavior of AFC with $K_2CO_3$. A thin YSZ (30 ${\mu}m$ thick) was found to be higher in the power density than 0.9 mm of YSZ.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.686-686
• /
• 2009

가스하이드레이트는 수소결합을 하는 물분자의 고체상 격자(Lattice)내에 포집되어 들어가는 기체분자로 구성된 결정화합물로서 외형적인 형태는 얼음과 거의 유사하다. 천연가스 하이드레이트 기술의 최대장점으로는 액화천연가스(LNG)는 초저온인 $-162^{\circ}C$의 저장조건이 필요하지만 천연가스하이드레이트(NGH)기술은 비교적 온화한 조건인 $-15^{\circ}C$에서 천연가스를 고체상태로 저장/이용할 수 있다는 것이다. 천연가스를 $-162^{\circ}C$에서 액화시킨 LNG상태로 생산, 수송, 저장하는 경우보다 고체상태인 NGH(Natural Gas Hydrate)로 만들어서 생산, 수송, 저장할 경우 천연가스의 생산, 수송, 저장, 재가스화 등의 일련의 공정과 비교해볼 때 LNG방법보다 약 24%이상의 경비를 절감을 할 수 있다고 보고되어지고 있다. 따라서, 천연가스의 수송 및 저장기술에서의 탁월한 경제성으로 인해 선진국에서는 가스하이드레이트에 대한 활발한 연구가 진행되고 있다. 특히 일본은 5Ton/Day용량의 NGH 생산플랜트를 건설하여 시운전 중에 있다. NGH기술의 주요 활용분야는 대용량의 가스매장량을 요구하여 LNG공정기술을 적용할 수 없는 중소형가스전 또는 한계가스전에 경제적으로 적용하는 해양수송분야와 천연가스 공급망이 갖춰져 있지 못한 지역에 NGH Pellet형태로 수송/재기화하여 활용하는 내륙운송이 분야가 있다. 국내에서는 지식경제부 국책과제인 ETI(Energy Technology Innovation)사업을 시작으로 국가경쟁력 제고 차원에서 이러한 기술의 기반구촉 및 실증화 사업이 진행되고 있다. 주요 내용으로는 NGH Process Flow, Overall NGH Process concept diagram, NGH Carrier outline, NGH Land Transportation chain 등이 포함되어 있다.

• Clean Technology
• /
• v.20 no.1
• /
• pp.57-63
• /
• 2014

In this work, we performed the methanation with steam and synthesis gas of a low $H_2/CO$ ratio to develop a process for producing SNG (synthetic natural gas). In this experiment conditions, the water gas shift reaction and the methanation reaction take place at the same time, and insufficient supply of steam might cause the deactivation of the catalyst. Therefore, the reaction characteristics with the amount of steam was performed, and the methanation on syngas containing $CO_2$ of the high concentration were studied. As a result, the temperature in the catalyst bed decreased by the supply of steam, and the methanation and the water gas shift reaction occurred at the same time. Although methane yield slightly decreased at the methanation using syngas containing $CO_2$ of the high concentration, the long-term operation (1,000 h) in the experimental conditions of this study indicates that this condition is suitable for the new commercial scale SNG process.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.312-318
• /
• 2011

We have investigated the kinetics and catalytic activity of $CO_2$-lignite gasification with various metal precursors as catalysts. $K_2CO_3$, $Mn(NO_3)_2$, and $Ce(NO_3)_3$ were used and impregnated on a coal using an evaporator. The gasification experiments were carried out with the low rank coal loaded with 5 wt% catalyst at the temperature range from $700{\sim}900^{\circ}C$ and atmospheric pressure with the $N_2-CO_2$ reactant gas mixture. The catalytic effect on the gasification rate of the low rank coal with $CO_2$ was determined by the thermogravimetric analyzer. It was observed that the low rank coal reached the complete carbon conversion regardless of the kinds of catalysts at $900^{\circ}C$ from the results of TGA. The catalytic activity was ranked as 5 wt% $K_2CO_3$ > 5 wt% $Mn(NO_3)_2$ > 5 wt% $Ce(NO_3)_3$ > Non-catalyst at $900^{\circ}C$. The gasification rate increased with increasing the temperature. The activation energy of the catalytic gasification with 5 wt% $K_2CO_3$ was 119.0 kJ/mol, which was the lowest among all catalysts.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.23-27
• /
• 2012

To make synthetic liquid fuel from biomass such as wood pellet, energy crop and so on, a biomass to liquid (BTL) process by using a biomass gasifier with Fisher-Tropsch (FT) reaction was developed. However $H_2S$, COS and $CO_2$ in syngas from biomass gasifiers resulted in a decrease of the conversion efficiency and the deactivation of the catalyst. To remove acid gases in syngas, a lab-scale methanol absorption tower was developed and the removal characteristics of acid gases were investigated. The methanol absorption tower efficiently removed $H_2S$ and COS with a removal of $CO_2$, so it could be useful process for the BTL process.

• Journal of Energy Engineering
• /
• v.16 no.2
• /
• pp.83-92
• /
• 2007

In view of stringent environment regulations to control the emission of green house gases and also depleting fossil fuel reserves, it is high quality desirable to develop alternative technologies to produce high quality fuels. To this end Biomass to Liquid (BTL) technology has received much attention in recent years. BTL process generally consists of gasification of biomass to produce bio-syngas, cleaning and control of $H_{2}/CO$ mole ratio of bio-syngas and Fischer-Tropsch synthesis & upgrading systems. Choren, Germany has first developed the commercial BTL process using unique gasification system i.e., Carbo-V. A new technology to remove tars and BTX has been developed by ECN in Netherlands employing a gasification system combined with OLGA technology. Several other countries including USA and Japan are showing great interest in BTL technology. Thus in view of our national energy security and also the environmental regulations, it is essential to develop alternative technologies like BTL in order to meet the increasing demand of energy though our insufficient biomass resources. In this paper we present an overview and development status of BTL-diesel technology.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.1-6
• /
• 2012

This study was conducted to verify the effect of chlorine dioxide ($ClO_2$) on odor reduction at a commercial swine facility consisting of a compost ficility. Compost facility in $NH_3$ concentration was around 550 ppm and less than 78 ppm before and after the $ClO_2$ spraying, respectively, which was over 86% reduction. There was no H2S detection. $NH_3$ concentration was around 420 ppm and less than 35 ppm before and after the $ClO_2$ spraying, respectively, which was over 83% reduction. $H_2S$ concentration was around 210 ppb and less than 32 ppb before and after the $ClO_2$ spraying, respectively, which was over 85% reduction. Hence, $ClO_2$ spraying at windowless barns was compost facility decreased malodor such as $NH_3$.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.81-89
• /
• 2002

IGCC (Integrated Coal Gasification Combined Cycle) is a technology that generates electric power using coal gasification and gasified fuel. Carbon conversion value of IGCC is higher and the influence on the environment is lower than the pulverized coal power plant. Especially, in the nations where the weight of fossil fuel for power generation is remarkably high like in Korea, IGCC stands out as an alternative plan to cope with sudden limitation for the emissions. In this paper, system design study for the commercial IGCC system which the introduction is imminent to Korea was performed. Two cases of entrained gasification process are adapted, one is FHR(full heat recovery) type IGCC system for high efficiency and the other is Quench type IGCC system for low cost. System simulations using common codes like AspenPlus were performed for each system. In the case of Quench system, system option study and sensitivity analysis of the air extraction rate was performed. Thermal performance result for the FHR system is 42.6% (HHV, Net) and for the quench system is 40% (HHV, net) when 75% air is extracted.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.80-85
• /
• 2021

The gasification of coffee leaves, which are a type of biomass waste, was conducted on a pilot of a downdraft fixed gasification system to investigate the gasification characteristics. The experiment was performed using a coffee leaf pellet size and a batch-type gasification system consisting of a gasifier, cooling cyclone, scrubber, and bag filter. It was found that the air-to-fuel ratio was 2.32 Nm³/kg·h and the reaction temperature was 700 ℃-900 ℃. However, the air flow rate changed to 0.45 Nm³/min, which was lower than the initial starting value depending on the temperature change during the gasification process. It was concluded that coffee leaves can be converted from biomass waste into useful synthetic gas as an alternative energy source.