• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.70-70
• /
• 2003

액체 로켓 엔진에 있어 극저온 추진제인 액체 산소를 사용하는 경우에는 He을 가압제로 사용하는 것이 가장 바람직하지만, 기체인 헬륨은 발사 대기시, 선가압시, 비행중에 액체산소에 서서히 녹게 된다. 일정량 이상의 He이 용해되어 있는 LOX가 엔진에 공급되는 경우에는 터보펌프의 이상 작동 또는 연소 불안정을 야기하게 되므로, 추진기관이 작동하는 동안에 용해되어 있던 He이 액체 산소에서 분해되어 가스로 발생되는지 여부를 판단하고, 이는 엔진의 연소 시험을 통해서 검증되어야 한다. 본 연구에서는 가상의 작동 상태에 대해 최대로 용해될 수 있는 러e의 양을 계산하고, 현재 사용되는 발사체의 경우와 비교를 하여 추진시스템 운용 조건을 적절히 조절하는 방안을 제시하였다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.192-198
• /
• 2015

Since instrument landing system currently operating in most airports is operating in single-pass, it is not possible to accommodate a large number of aircraft. A satellite navigation system GBAS using a GNSS has been developed to solve these limitation when air traffic increases. GBAS is better than the ILS in position accuracy and capable of landing through multiple paths rather than a single path, the aircraft can perform varied landing procedures. In this paper, after we established a virtual ILS procedures at Taean Airfield in which ILS installation is impossible due to environmental requirements and airspace restrictions, flight test was performed by Cessna Skyhawk 172 to compare the virtual ILS procedures and curved approach procedure and the advantage of curved approach was confirmed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.709-719
• /
• 2021

Recent progress in analysis and flight simulation methods enables wider use of a virtual certification and reduces number of certification flight tests. Aerodynamic database (AeroDB) is one of the most important components for the flight simulation. It is composed of aerodynamic coefficients at a range of flight conditions and control deflections. This paper proposes and efficient method for construction of AeroDB that combines Gaussian Process based Variable Fidelity Modeling with adaptive sampling algorithm. A case study of virtual certification of a F-16 fighter is presented. Four AeroDB were constructed using different number and distribution of high-fidelity data points. The constructed database is then used to simulate gliding, short pitch, and roll response. Compliance with certification regulations is then checked. The case study demonstrates that the proposed method can significantly reduce number of high-fidelity data points while maintaining high accuracy of the simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.540-547
• /
• 2015

This paper describes development contents and flight tests of an ACMI simulator based on LVC integrating architecture. ACMI is the system that provides air combat training and ground bombing training for improving fighting efficiency, that is the live simulation involving real people to operate real systems. ACMI simulator was developed for technic acquisition of LVC interoperability by using data link communication. ACMI simulator simulated maneuvering of a fighter by operating an UAV, a fighter can be distinguished from an UAV by maneuvering characteristics. This study proposes maneuvering simulation method by using flight data of the UAV, and performed its flight test for verifying similarity of fighter maneuvering.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.208-216
• /
• 2017

This paper presents the design method of an FMCW(frequency-modulated continuous-wave) altitude simulator which generates propagation delay signals according to target distances to test the radar altimeter. To improve the conventional RF method for creating delay signals, the simulator is designed by the RF-optics-RF method using optical delay lines. In addition, it is designed to simulate the Doppler shift and jamming that may occur in actual flight environment. In order to evaluate the performance of the developed simulator, the integration tests have been conducted with the radar altimeter. Through the test, we successfully verified the performance of the simulator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.878-886
• /
• 2012

This paper investigates the implementation and flight test of realtime vision guided autopilot system based on virtual instrumentation platform. A graphical design process via virtual instrumentation platform is fully used for the image processing, communication between systems, vehicle dynamics control, and vision coupled guidance algorithms. A significatnt ojective of the algorithm is to achieve an environment robust autopilot despite wind and an irregular image acquisition condition. For a robust vision guided path tracking and hovering performance, the flight path guidance logic is combined in a multi conditional basis with the position estimation algorithm coupled with the vehicle attitude dynamics. An onboard flight test equipped with the developed realtime vision guided autopilot system is done using the rotary UAV system with full attitude control capability. Outdoor flight test demonstrated that the designed vision guided autopilot system succeeded in UAV's hovering on top of ground target within about several meters under geenral windy environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.185-194
• /
• 2016

It is essential for generating the synthetic image to test and evaluate a guided missile system in the hardware-in-the-loop simulation. In order to make the evaluation results to be more reliable, the extent of fidelity and rendering performance of the synthetic image cannot be left ignored. There are numerous challenges to simulate the LWIR sensor signature of sea surface depending on the incident angle, especially in the maritime environment. In this paper, we investigate the key factors in determining the apparent temperature of sea surface and propose the approximate formula consisting of optical characteristics of sea surface and sky radiance. We find that the greater the incident angle increases, the larger the reflectivity of sea surface, and the greater the water vapor concentration in atmosphere increases, the larger the amount of sky radiance. On the basis of this information, we generate the virtual maritime environment in LWIR region using the SE-WORKBENCH, physically based rendering software. The margin of error is under seven percentage points.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.788-797
• /
• 2023

In this paper, we introduced a test environment to test a vision-aided navigation system, as an alternative navigation system when global positioning system (GPS) is unavailable, for vertical take-off and landing (VTOL) unmanned aerial system. It is efficient to use a virtual environment to test and evaluate the vision-aided navigation system under development, but currently no suitable equipment has been developed in Korea. Thus, the proposed test environment is developed to evaluate the performance of the navigation system by generating input signal modeling and simulating operation environment of the system, and by monitoring output signal. This paper comprehensively describes research procedure from derivation of requirements specifications to hardware/software design according to the requirements, and production of the test environment. This test environment was used for evaluating the vision-aided navigation algorithm which we are developing, and conducting simulation based pre-flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.393-400
• /
• 2017

A virtual simulation test program to carry out the handling qualities of unmanned Rotorcraft has developed by using the MATLAB GUIDE(Graphic User Interface Development Environment). The handling quality evaluation program based on ADS-33E contributes to design the flight control system and to evaluate handling qualities. In addition, Linear Quadratic Tracker with Integrator(LQTI) attitude controller based on Linear Quadratic Regulator(LQR) for to rotorcraft BO-105C and the effects of the handling qualities is analyzed change to weight matrices of the Q and R.