• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.48-50
• /
• 2010

Stommel(1948)은 서안경계류의 원인이 베타효과($\beta$-effect)라 일컫는 코리올리 파라미터(f)의 위도 변화 때문인 것을 밝혔다. 서안경계류는 고등학교나 대학 교양에서 중요하게 다뤄지고 있다. 학생들은 보통 이론 수업만으로 서안경계류의 발생 과정, 이에 관련된 코리올리 힘, 베타효과 등을 이해해야 한다. 때문에 서안경계류와 관련된 실험이 있다면 이를 이해하는 데 큰 도움이 될 것이다. 또한 연구에서 검토한 6종의 고등학교 지구과학 2 교과서는 서안경계류를 본문과 더불어 삽화로 설명하고 있다. 그러나 이 중 3종의 교과서 삽화에서는 서안경계류의 발생 원인을 코리올리 힘만으로 지적하고 있다. 따라서 일부 학생은 서안경계류의 원인을 코리올리 힘으로 오해 할 수 있다. 위와 같은 이유로 우리는 서안경계류가 코리올리 힘의 작용과 베타효과에 의해 나타나는 것을 쉽게 확인 할 수 있는 실험 장치와 다양한 실험 방법을 개발하였다. 개발한 실험 장치는 직육면체의 수조와 회전 속도를 조절할 수 있는 테이블로 구성된다. (Fig. 1) 이와 같은 회전수조는 대기와 해양의 움직임을 실험실에서 모사하기 위해 자주 사용되었다(Beardsely 1969, 소선섭 등 1995; 1997). 우리의 수조는 경사진 바닥과 평평한 바닥으로 두종류를 제작하였다. 바닥이 경사진 수조는 베타효과를 구현하기 위한 것이다. 반시계 방향으로 회전하는 테이블은 중위도 어떤 위도에 접하는 가상의 평면이 지구 자전에 의해 회전하는 것을 나타낸다. 그리고 수조 상부에는 회전원판을 물에 접하여 시계방향으로 회전시킨다. 회전원판은 북반구 중위도 해양에 작용하는 바람 응력을 나타낸다. 우리는 테이블의 회전유무와 바닥의 경사유무에 따라 4개 실험을 수행하였다(Table. 1). 각 실험에서 물을 채운 수조를 원판에 올려놓고, 회전원판을 작동시킨 후 20분 동안 그대로 두어 수조안의 미세규모의 운동을 최소화 시킨 후 잉크를 떨어뜨리고 관찰하였다. 그 결과 실험 SB_f1은 베타효과와 코리올리 힘이 존재하여 서쪽 경계에서 좁고 빠른 흐름을 만들고 수조의 중간 부근에서 경계를 벗어나 동쪽으로 향하고 있다. 이 모습은 실제 해양의 서안경계류의 분리 현상과 비슷하다. FB_f1은 코리올리 힘만 존재하여 서쪽 경계에서 좁고 빠른 순환과 경계를 벗어나 동쪽으로 분리되는 흐름이 나타나지 않으며 전반적으로 크게 회전하는 모습을 보인다. SB_f0은 바람의 응력만 존재하는 경우로 잉크가 확산하는 모습을 보이며 나선팔의 모양으로 회전하면서 넓게 퍼져나간다. FB_f0의 모양도 이와 비슷하게 나타난다. 실험 SB_f1과 FB_f1을 비교하여 서안경계류는 코리올리 힘의 위도변화 효과인 베타효과가 있을 때 발생한다는 것을 알 수 있다(Fig. 2). 이 결과는 "단순히 코리올리 효과에 의해 서안경계류가 발생한다"는 생각을 바꾸게 할 것이다. 덧붙여 서안경계류 분리와 수조 바닥의 경사의 관계를 살펴보기 위한 실험을 실시하였다. 경사가 더 급하면 ($\alpha=20^{\circ}$) 서쪽 경계를 벗어나는 지점이 좀 더 북쪽에 나타났다. 현재 서안경계류는 개발한 실험 장치와 방법을 학교 현장에 적용하여 그 교육적 활용 가치를 평가하는 연구를 진행하고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5207-5215
• /
• 2010

Selecting proper location for complex facility with special purpose need comprehensive consideration on the condition and surrounding environment. Especially, in case of living space for human, lighting, ventilation, efficiency in land use, etc. are important elements. Diverse 3D analysis through 3D topography modeling and virtual simulation is necessary for this. Now, it can be processed with relatively inexpensive cost since high resolution satellite image essential in topography modeling is provided with domestic technology through Arirang No. 2 satellite (KOMPSAT2). In this study, several candidate sites is selected for complex planning with special purpose and analysis on proper location was performed using the 3D topography modeling and land information. For this, land analysis, land price calculation, slope analysis and aspect analysis have been carried out. As a result of arranging the evaluation index for each candidate site and attempting the quantitative evaluation, proper location could be selected efficiently and reasonably.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2810-2818
• /
• 2009

In order to examine the characteristic of shallow failure in cut slopes composed of weathered granite soil, this study calculated critical permeability coefficient according to rainfall characteristic in Korea, performed stability analysis according to the representative physical properties of weathered granite soil distributed in Korea such as horizontal distance to the failure surface of cut slope, slope inclination, slope height, and the depth of wetting by rainfall, and analyzed the results. In the results of analyzing critical permeability coefficient, when the local rainfall characteristic was considered, the maximum critical permeability coefficient was $7.16{\times}10^{-4}cm/sec$. We judged that shallow failure according to wetting depth should be considered when rainfall below the critical rainfall intensity lasts longer than the minimum rainfall duration in cut slopes composed of weathered granite soil, which had a critical permeability coefficient lower than the maximum critical permeability coefficient. Furthermore, using simulated failure surface, this study could understand the characteristic of shallow failure in cut slopes based on the change in slope safety factor according to horizontal distance, wetting depth, and strength parameter.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.4
• /
• pp.393-401
• /
• 2009

The flexural-stiffness formula of the wale for the innovative prestressed support (IPS) system was precisely derived, and the equivalent beam stiffness was introduced for application in the actual design of the IPS wale. The cable tension forces of the IPS wale were calculated in both cases, and the axial-deformation effects were included and ignored, respectively. The central displacements of the 1-post, 2-post, 3-post, and 4-post IPS wales were calculated based on the principle of virtual work. The effects of the IPS wale length and cable inclination angle were also investigated using the derived central displacements. The simplified equivalent flexural stiffness of the IPS wale is presented herein for design purposes, and the validity of the proposed design formula was verified through its comparison with the FE and analysis solutions.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.436-440
• /
• 2008

Complete consideration on condition and surrounding environment shall be performed to select proper location for complex planning or establishment of facility with special purpose. Especially, in case of living space for human, lighting, ventilation, efficiency in land use, etc. are important elements. Diverse 3D analysis through 3D topography modeling and virtual simulation is necessary for this. Now, it can be processed with relatively inexpensive cost since high resolution satellite image essential in topography modeling is provided with domestic technology through Arirang No. 2 satellite (KOMPSAT2). In this study, several candidate sites is selected for complex planning with special purpose and analysis on proper location was performed using the 3D topography modeling and land information. For this, land analysis, land price calculation, slope analysis and aspect analysis have been carried out. As a result of arranging the evaluation index for each candidate site and attempting the quantitative evaluation, proper location could be selected efficiently and reasonably.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.127-140
• /
• 1988

The management of sewage and rainfall runoff becomes an emerging problem with the growth of urban communities. From the uncontrollable excess intensity or amount of rainfall, the conditions of sewer surcharge or manhole overflow could be generated in the combined sewer network where municipal or industrial wastewaters and rainfall runoff flow. The predictive model far the prevention of property and human life losses from this inundation was studied in this research. In the development of a mathematical flow model for the combined sewer surcharge and overflow, the Preissmann Slot concept and the four-point implicit method of finite difference were utilized. For the usage in personal computer, the overlapping segment method that required less memory storage was adopted. Through the simulation of hypothetical sewer network, the conservation of discharge volume was checked, and the usefulness of the Preissmann Slot was assured from the temporal distribution of discharge and depth along the sewer network. Also the possible field application for the correction of sewer diameters and slopes in the design of sewer network which has no surcharge/overflow condition was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.271-279
• /
• 2019

In extreme environment regions, unmanned rovers equipped with various sensors and devices are being developed for long-term exploration on behalf of humans. On the other hand, due to the harsh weather conditions and rough terrain, the rover camera has limited visible distance and field of view. Therefore, the rover cameras should be located for safe navigation and efficient terrain mapping. In this regard, to minimize the cost and time to manufacture the camera system on a rover, the simulation method using the rover design is presented to optimize the camera locations on the rover efficiently. In the simulation, a simulated terrain was taken from cameras with different locations and angles. The visible distance and overlapped extent of camera images, and terrain data accuracy calculated from the simulation were compared to determine the optimal locations of the rover's cameras. The simulated results will be used to manufacture a rover and camera system. In addition, self and system calibrations will be conducted to calculate the accurate position of the camera system on the rover.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.197-206
• /
• 2010

For an emotion retrieval system implementation to support pedestrian navigation, coordinating the pedestrian emotion model with the system user's emotion is considered a key component. This study proposes a new method for capturing the user's model that corresponds to the pedestrian emotion model and examines the validity of the method. In the first phase, a database comprising a set of interior images that represent hypothetical destinations was developed. In the second phase, 10 subjects were recruited and asked to evaluate on navigation and satisfaction toward each interior image in five rounds of navigation experiments. In the last phase, the subjects' feedback data was used for of the pedestrian emotion model, which is called ‘learning' in this study. After evaluations by the subjects, the learning effect was analyzed by the following aspects: recall ratio, precision ratio, retrieval ranking, and satisfaction. Findings of the analysis verify that all four aspects significantly were improved after the learning. This study demonstrates the effectiveness of the learning algorithm for the proposed pedestrian emotion model. Furthermore, this study demonstrates the potential of such pedestrian emotion model to be well applicable in the development of various mobile contents service systems dealing with visual images such as commercial interiors in the future.