• Title/Summary/Keyword: 가산잡음

Search Result 88, Processing Time 0.022 seconds

Implementation of GMSK digital radio modem using a discriminator detection (Discriminator 복조방식을 이용한 GMSK디지틀 무선모뎀의 구현)

  • 임명섭;박정훈;박선규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.14 no.1
    • /
    • pp.11-21
    • /
    • 1989
  • In this paper, a GMSK modulator was implemented with a gaussian lowpass filter using digital signal processing, a phase integration, D/A convers and auxiliary circuits. The relatively narrow bandwidth of power spectrum of the GMSK modulator is observed when the cut off frequency (B T) of the gaussian baseband filter is varied. In a demodulator, a discriminator type circuit is used. Using the above degital radio GMSK modem, BER is theoretically derived and experimentally measured when 16Kbps PRBS data is transmitted under Rayleigh fading and additive white gaussian noise conditions.

  • PDF

Design of an Efficient Turbo Decoder by Initial Threshold Setting (초기 임계값 설정에 의한 효율적인 터보 복호기 설계)

  • 김동한;황선영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.5B
    • /
    • pp.582-591
    • /
    • 2001
  • 터보 부호는 반복적인 복호 알고리즘을 사용함으로써 가산성 백색 가우시안 잡음(AWGN) 채널 환경에서 Shannon 한계에 가까운 성능을 보이는 오류정정 방식으로 제안되었으나, 반복 연산량에 따른 복호 지연과 인터리버에 따른 지연에 의해 실시간 처리의 어려움이라는 문제점을 안고 있다. 본 논문에서는 터보 부호의 성능을 저하시키지 않는 범위에서 적절한 초기 임계값 설정에 따라 불필요한 반복 복호 횟수를 줄일 수 있는 터보 복호기 구조를 제안한다. 적절한 초기 임계값 설정은 LLR(Log-Likelihood Ratio)값의 평균값과 분산, 복호기의 출력에 대한 BER에 근거하여 여러 번의 모의 실험을 통해서 최적의 값으로 결정된다. 제안한 방식은 초기 임계값을 적절히 선택하면 손실이 없는 범위 내에서 반복횟수를 감소시킴으로써 기존의 정해진 반복횟수로 인한 큰 복호 지연을 미연에 방지하고, 이에 따른 계산량 감소는 저전력의 효과도 가져온다. 성능 평가를 위해 BER = $10^{-6}$이내이고, 전송속도가 32kbps 이상인 IMT2000의 고속 데이터 전송 환경에서 모의 실험을 하였다. 실험 결과로 기존의 정해진 반복횟수를 갖는 터보 복호기에 비해 SNR 변동(0~3dB)에서 평균적으로 55~90% 정도의 감소된 반복횟수를 검증하였다.

  • PDF

Iterative Turbo Decoding Using Three Cascade MAP Decoder (3개의 직렬 MAP 복호기를 이용한 반복 터보 복호화기)

  • 김동원;이호웅;강철호
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.6B
    • /
    • pp.709-716
    • /
    • 2001
  • 반복 복호 알고리듬에 의해 복호화된 터보 코드는 가산성 백색 가우시안 잡음(AWGN) 채널 환경에서 이론적으로 Shannon의 한계에 근접한 뛰어난 코딩 이득을 나타내는 것으로 보여지고 있다. 그러나, 터보 코드의 성능은 터보 부호화기에서 프레임의 크기 즉, 인터리버의 크기에 의존한다. IMT-2000과 같은 이동 통신 채널 환경에서 음성을 전송하는 경우에는 터보 코드의 프레임 크기는 매우 작다. 그리고, 그것은 터보 코드의 성능을 떨어뜨리는 직접적인 원인이 된다. 본 논문에서는 차세대 이동 통신 시스템에서 프레임 크기가 작은 음성 프레임을 이용하여 터보 코드의 성능을 검증하며, 작은 프레임 크기에 알맞은 3개의 직렬 MAP(Maximum A Posteriori probability) 복호기를 이용한 반복 복호의 터보 코드를 제안하고 부호율 1/3, 구속장의 길이 3 또는 4, 프레임 크기 24, 192 비트에 대하여 컴퓨터 모의실험을 통해 터보 코드의 성능을 분석한다.

  • PDF

Joint Optimization of Error Resilient Video Coding and Error Correction Coding Technique over Wireless Mobile Channels (이동통신 환경에서 전송 오류에 강인한 영상 부호화 기법과 오류 정정 부호화 기법의 동시 최적화에 관한 연구)

  • 이창우;김종원
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.6B
    • /
    • pp.802-809
    • /
    • 2001
  • 이동통신 채널에서 압축된 동영상 정보를 전송하게 되면 다경로 전송으로 인한 페이딩 영향과 시, 공간상으로 압축된 동영상 정보의 오류 전파 때문에 최종적으로 복원되는 동영상 신호의 화질이 크게 저하된다. 이에 능동적으로 대처하기 위하여 다양한 오류 정정 부호화 기법들이 전체 정보량 증가를 감수하면서 제안되어 왔다. 본 논문에서는 이동통신 환경에서 압축된 동영상 신호의 안정적인 전송을 위해서 ITU-T H.263 기법으로 압축된 동영상 정보에 두 종류의 다전송율 지원 오류 정정 부호들을 적용한 경우의 동영상 보호 능력을 분석 비교한다. 즉 표준기법에서 널리 사용되는 RCPC(rate compatible punctured convolutional) 부호와 RC 특성을 갖는 turbo 부호인 RCPT(rate compatible punctured turbo) 부호를 사용한 동영상 부호 시스템의 성능을 가산 백색 잡음 채널과 레일리 페이딩 채널에서 해석하고, 압축과 오류 정정 부호화율의 동시 최적화를 살펴본다.

  • PDF

The recognition of Printed Music Score and Performance Using Computer Vision system (컴퓨터 비젼 시스템에 의한 인쇄악보의 인식과 연주)

  • 이명우;최종수
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.22 no.5
    • /
    • pp.10-16
    • /
    • 1985
  • In this paper, a computer vision system, which catches printed music score image using CCTV camera and microcomputer, and then recognizes the image and performs tar music with speaker, is discussed. Integral projection method is adopted for feature detection and recognition of the music score image. The range of recognition is con(ined to staffs, perpen-dicular lines and musical notes including chord notes among the various kinds of elements of music score. The practical recognition algorithm considering noises, the preprocessing processes getting rid of noises are also showed, and simple hardware system playing chord is made, In the results, good recognition ratio and performance are obtained.

  • PDF

New Channel Equalizers for Mixed Phase Channel (혼합위상 특성을 고려한 새로운 채널 등화기)

  • 안경승;조주필;백흥기
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.8B
    • /
    • pp.1445-1452
    • /
    • 2000
  • In general, the communication channel can be modeled as inter-symbol interference(ISI) and additive white gaussian noise channel. Viterbi algorithm is optimum detector for transmitted data at transmitter, but it needs large computational complexity. For the sake of this problem, adaptive equalizers are employed for channel equalization which is not attractive for mixed phase channel. In this paper, we propose the effective new channel equalizer for mixed phase channel and show the better performance than previous equalizers.

  • PDF

Performance Evaluation of PBCH in LTE-Based 5G MBMS and 5G NR (LTE 기반 5G MBMS 와 5G NR 의 PBCH 성능 평가)

  • Ahn, Haesung;Kim, Hyeongseok;Cha, Eunyoung;Kim, Jeongchang;Park, Sung-Ik;Hur, Namho
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2021.06a
    • /
    • pp.260-263
    • /
    • 2021
  • 3GPP (3rd generation partnership project)는 5G 요구 조건을 충족시키기 위해 release 16 에서 FeMBMS (further evolved MBMS)를 LTE 기반 5G MBMS 로 개선하였다. 이어서, 현재 개발 중인 release 17 에서 NR 기반의 디지털 방송을 위한 NR MBS (multimedia broadcast services)가 논의되고 있다. 본 논문에서는 LTE (long term evolution) 기반 5G MBMS (fifth generation multimedia broadcast & multicast services)와 5G NR (fifth generation new radio)의 PBCH (physical broadcast channel) 에 대한 송수신기 구조를 설명하고, 성능을 평가한다. 본 논문에서는 가산 백색 가우시안 잡음(additive white Gaussian noise: AWGN) 및 고정 환경 하에서 LTE 기반 5G MBMS 와 5G NR 에 대한 PBCH 의 성능을 비교한다.

  • PDF

Design of a Fast Adder Using Robust QCA Design Guide (강건 QCA 설계 지침을 이용한 고속 가산기 설계)

  • Lee Eun-Choul;Kim Kyo-Sun
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.4 s.346
    • /
    • pp.56-65
    • /
    • 2006
  • The Quantum-dot Cellular Automata (QCA) can be considered as a candidate for the next generation digital logic implementation technology due to their small feature sizes and ultra low power consumption. Up to now, several designs using Uh technology have been proposed. However, we found not all of the designs function properly. Furthermore, no general design guidelines have been proposed so far. A straightforward extension of a simple functional design pattern may fail. This makes designing a large scale circuits using QCA technology an extremely time-consuming process. In this paper, we show several critical vulnerabilities related to unbalanced input paths to QCA gates and sneak noise paths in QCA interconnect structures. In order to make up the vulnerabilities, a disciplinary guideline will be proposed. Also, we present a fast adder which has been designed by the discipline, and verified to be functional by the simulation.

Digital Logic Extraction from QCA Designs (QCA 설계에서 디지털 논리 자동 추출)

  • Oh, Youn-Bo;Kim, Kyo-Sun
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.1
    • /
    • pp.107-116
    • /
    • 2009
  • Quantum-dot Cellular Automata (QCA) is one of the most promising next generation nanoelectronic devices which will inherit the throne of CMOS which is the domineering implementation technology for large scale low power digital systems. In late 1990s, the basic operations of the QCA cell were already demonstrated on a hardware implementation. Also, design tools and simulators were developed. Nevertheless, its design technology is not quite ready for ultra large scale designs. This paper proposes a new approach which enables the QCA designs to inherit the verification methodologies and tools of CMOS designs, as well. First, a set of disciplinary rules strictly restrict the cell arrangement not to deviate from the predefined structures but to guarantee the deterministic digital behaviors is proposed. After the gate and interconnect structures of. the QCA design are identified, the signal integrity requirements including the input path balancing of majority gates, and the prevention of the noise amplification are checked. And then the digital logic is extracted and stored in the OpenAccess common engineering database which provides a connection to a large pool of CMOS design verification tools. Towards validating the proposed approach, we designed a 2-bit adder, a bit-serial adder, and an ALU bit-slice. For each design, the digital logic is extracted, translated into the Verilog net list, and then simulated using a commercial software.

Pattern Extraction of EMG Signal of Spinal Cord Injured Patients via Multiscaled Nonlinear Processing (다중스케일 비선형 처리를 통한 척수 손상 환자의 근전도 신호 패턴 추출)

  • Lee, Y. S.;Lee, J.;Kim, H. D.;Park, I. S.;Ko, H. Y.;Kim, S. H.
    • Journal of Biomedical Engineering Research
    • /
    • v.22 no.3
    • /
    • pp.249-257
    • /
    • 2001
  • The voluntary contracted EMG signal of spinal cord injured patients is very small because the information from central nervous system is not sufficiently transmitted to $\alpha$ motor neuron or muscle fiber. Therefore the acquisited EMG signal from needle or surface electrodes can not be identified obvious voluntary contraction pattern by muscle movement. In this paper we propose the extraction technique of voluntary muscle contraction and relaxation pattern from EMG signal of spinal cord injured patient whose EMG signal is composed of the linear sum of mo색 unit action potentials with two noise sources, additive noise assumed to be white Gaussian noise and high frequency discharge assumed to be not motor unit action potential but impulsive noise. In order to eliminate impulsive noise and additive noise from voluntary contracted EMG signal, we use the FatBear filter which is a nonarithmetic piecewise constant filter, and multiscale nonlinear wavelet denoising processing, respectively. The proposed technique is applied to the EMG signal acquisited from transverse myelitis patients to extract voluntary muscle contraction pattern.

  • PDF