• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2714-2716
• /
• 2003

대역확산기술의 하나인 Chirp 방식을 이용하여 기존의 전력선 통신모뎀 보다 고속 전송이 가능한 40kbps급 협대역 전력선 통신모뎀을 구현하였다. 본 연구에서 구현한 모뎀은 CEBus 규격을 사용하였으며, $100{\sim}380kHz$의 선형 가변 주파수 신호가 25us 동안 지속한 심볼을 사용하였다. 그리고 구현된 모뎀의 무부하 선로, 각종 부하 및 잡음환경에서의 특성실험 결과, Chirp 방식의 통신기술이 협대역에서 40kbps 이상의 속도를 낼 수 있는 가능성을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.54-59
• /
• 2007

In this paper, broadband voltage-controlled oscillator (VCO) using electronically controlled metamaterial transmission line based on varactor-loaded split-ring resonator (VLSRR) is presented. First, it is demonstrated that VLSRR coupled to microstrip line can lead to metamaterial transmission line with tuning capability. The negative effective permeability is provided by the VLSRR in a narrow band above the resonant frequency, which can be bias controlled by virtue of the presence of varactor diodes. The VCO with 1.8 V power supply has phase noise of $-108.84\;{\sim}\;-106.84\;dBc/Hz$ @ 100 Hz in the tuning range, $5.47\;{\sim}\;5.84\;GHz$. The figure of merit (FOM) called power-frequency-tuning-normalized (PFTN) is 20.144 dB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.174-179
• /
• 2013

This paper presents a capacitor loaded tunable bandpass chip filter using multiple split ring resonators (MSRRs) with two transmission zeros. To obtain high selectivity and minimize the chip size, asymmetric feed lines are adopted to make a pair of transmission zeros located on each side of passband. Compared with conventional filters using cross-coupling or source-load coupling techniques, the proposed filter uses only two resonators to achieve high selectivity through a pair of transmission zeros. In order to optimize selectivity and sensitivity (insertion loss) of the filter, the effect of the position of asymmetric feed line on transmission zeros and insertion loss is analyzed. The SOI-CMOS switched capacitor composed of metal-insulator-metal (MIM) capacitor and stacked-FETs is loaded at outer rings of MSRRs to tune passband frequency and handle high power signal up to +30 dBm. By turning on or off the gate of the transistors, the passband frequency can be shifted from 4GH to 5GHz. The proposed on-chip filter is implemented in 0.18-${\mu}m$ SOI CMOS technology that makes it possible to integrate high-Q passive devices and stacked-FETs. The designed filter shows miniaturized size of only $4mm{\times}2mm$ (i.e., $0.177{\lambda}g{\times}0.088{\lambda}g$), where ${\lambda}g$ denotes the guided wave length of the $50{\Omega}$ microstrip line at center frequency. The measured insertion loss (S21)is about 5.1dB and 6.9dB at 5.4GHz and 4.5GHz, respectively. The designed filter shows out-of-band rejection greater than 20dB at 500MHz offset from center frequency.

• Electronics and Telecommunications Trends
• /
• v.16 no.3 s.69
• /
• pp.1-8
• /
• 2001

전력선 이용 통신(PLC)은 전화선, CATV 망, 위성에 이어 제4의 통신망 산업으로 급부상하고 있다. 본 고에서는 피엘콤 이더넷 PLC를 중심으로 PLC의 기술특성 및 인터넷 접속가격 비교를 통해 국내 PLC 시장을 전망하였다. PLC는 기술적인 측면에서 제한된 전송전력, 높은 부하 간섭, 가변감쇠, 그리고 임피던스 레벨 등의 단점을 가지고 있다. 그러나 속도 및 가격 측면에서는 절대 및 비교우위를 가지고 있다. 따라서 기술적인 문제점들을 해결하여 상용화에 성공할 경우 기존의 인터넷접속 서비스 상품과 경쟁하는 제3의 유선통신망으로 등장하면서 기존 통신서비스 시장의 구도를 크게 바꾸어 놓을 것으로 전망된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.4
• /
• pp.28-35
• /
• 1997

본 논문에서는 송전선로에 직렬로 삽입되어 선로의 리액턴스를 동적으로 보상하는 인버터식 직렬보상기에 대한 동적 응동 해석을 기술하고 있다. 이 직렬보상기는 다중펄스로 동작하는 전압원인버터와 결합변압기, 그리고 제어장치로 구성되어 있으며, 점호각을 조절하여 선로의 리액턴스를 가변하고 용량성 뿐만 아니라 유도성 보상도 가능하다. 이 보상기로 선로의 리액턴스를 감소시키면 전송 유효전력의 증각가 가능한데, 이러한 효과를 본 논문에서는 단일기-무한대-버스 전력계통에 대해 EMTP를 이용한 시뮬레션으로 확인하였으며, 또한 축소모형 제작과 실험을 통해 실험적으로 확인하였다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.327-329
• /
• 2004

전력선통신(PLC : Power Line Communication)은 실제 네트워크를 작성할 수 있는 이점은 있지만 이로 인해서 말단의 망 구성이 복잡해지고 여러 부하 장치들의 사용과 운용이 시간과 공간에 따라 전송 특성이 수시로 가변 하는 특성을 가지게 된다. 이러한 특성은 통신시스템 성능상의 다중 경로페이딩의 지연과 성분을 가지게 되므로, 열악한 통신 채널 환경 띤 다중 사용자 간섭에 의한 원인이 된다. 본 논문에서는 이런 원인을 극복하기 위한 한 가지방편으로서, 저간섭 전력선 통신에 적용 가능한 이진 ZCD 확산 코드를 제시하고, 상관 특성을 도출해 봄으로서, 그 유효성을 확인한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.739-745
• /
• 2006

This paper presents a method to control group delay tine using a resonance circuit. The group delay time adjuster(GDTA) that can control signal group delay time comprises a variable capacitance and a variable equivalent inductor. These are coupled in parallel at a node and also controlled by two bias voltages separately, A variable equivalent inductor is realized a transmission line terminated a variable capacitor. Group delay time can be controlled by change of capacitance and inductance, but the resonating frequency is fixed. When the proposed GDTA is fabricated on RFID Korean frequency band$(908.5{\sim}914 MHz)$, a group delay variation is obtained about 3 ns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1419-1427
• /
• 2007

In this paper, we propose an algorithm which implements a multi-sided side match finite-state vector quantization(MSMVQ). After extracting the edge information from an image and classifying the image into edge blocks or non-edge blocks, we construct an edge map. We subdivide edge blocks into sixteen classes using discrete cosine transform(DCT) AC coefficients. Based on edge map information, a state codebook is made from the master codebook, and side match calculation is done for two-sided or three-sided current block of image. For reducing transmitted bits, a decision is made whether or not to encode the non-edge blocks among the pre-coded blocks by using the master codebook. Also for reducing allocation bits of codeword indices to decoder, a variable length coder is used. Considering the comparison with side match finite-state vector quantization(SMVQ) and two-sided SMVQ(TSMVQ) algorithm about Zelda, Lenna, Bridge and Peppers image, the new algorithm shows better picture quality than SMVQ and TSMVQ respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2018

In the case of a radar repeater that used for the trajectory tracking of a high-speed aircraft, it emits pulses of short width. For phase displacement of these signals a branch type phase shifter is used. The phase on the transmission line is changed by utilizing the variable reactance at the end of the displacement branch transmission line. Further, it is easy to control the high output signal, and there is an advantage that the insertion loss is not large even when the reactance fails. In this paper, we will discuss the fabrication test results of a 400 W class phase shifter that sequentially displaces the phase at $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.53-62
• /
• 2005

In this paper, we implement a 40kbps narrowband powerline communication modem which is able to high transfer rate than conventional powerline communication technology by using the chirp technique that is one of the spread spectrum techniques. A modem that implement in this paper used the CEBus standard and a symbol that the linear variable frequency signal of 100$\sim$380kHz is kept for 25us. Experimental results, we verified the possibility that communication technology with the Chirp technique can make transfer rate more than 40kbps at narrowband communication.