• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.185-193
• /
• 2011

As a Lift axle is an additional axle installed mostly in heavy freight truck, It"s introduced for the purpose of cost saving, such as logistics, fuel, tire wear and prevention of the pavement damage. However, the Effects of a lift axle are anecdotal and they have occurred often that a lift axle is used improperly by expectations of some drivers. For these reasons, this study conducts a field experiment in order to identifying the change rate of fuel consumption due to an a Lift axle using, develops the fuel consumption model of field data, and then compares the effects of a Lift axle using through application of the model. As a result, fuel consumption decreased in loading conditions that are both empty and full when not using a lift axle.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.397-404
• /
• 2004

This paper proposes a variable speed control scheme of grid-connected wind power generation systems using cage-type induction generators. The induction generator is operated in indirect vector control mode, where the d-axis current controls the excitation level and the q-axis current controls the generator torque, by which the speed of the induction generator is controlled according to the variation of the wind speed In order to produce the maximum output power. The generated power flows into the utility grid through the back-to-back PWM converter. The line-side converter controls the dc link voltage by the q-axis current control and can control the line-side power factor by the d-axis current control. Experimental results are shown to verify the validity of the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.147-155
• /
• 1998

Conventional time-scale modification methods have the problem that as the modification rate gets higher the time-scale modified speech signal becomes less intelligible, because they ignore the effect of articulation rate on speech characteristics. In this paper, we propose a variable time-scale modification method based on the knowledge that the timing information of transient portions of a speech signal plays an important role in speech perception. After identifying steady protions only. The result of subjective preference test indicates that the proposed method produces performance superior to that of the conventional SOLA method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.65-73
• /
• 2004

CMG(Control Momentum Gyro) is a control device being used for spacecraft attitude control constructing relatively large amount of torque compared to conventional body-fixed reaction wheels. The CMG produces gyroscopic control torque by continuously varying the angular momentum vector direction with respect to the spacecraft body. The VSCMG(Variable Speed Control Momentum Gyro) has favorable advantages with variable speed to lead to better control authority as well as singularity avoidance capability. Attitude dynamics with a VSCMG mounted on a two-axis gimbal system are derived in this study. The dynamic equation may be considered as an extension of the single-axis counterpart. Also, a feedback control law design is addressed in conjunction with the dynamic equations of motion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.135-140
• /
• 2022

Most machines are made of several types of . In particular, the shaft system of the ship consists of the brass of the propeller blade and the stainless steel of the shaft. When dissimilar the electrolyte solution of seawater, a voltaic cell and a shaft electromotive force is generated. This electromotive force causes electrical corrosion of the bearing and shaft supporting the shaft system. prevent this corrosion, a shaft grounding system is installed in ships. As for the experimental method, various information acquired by designing a program to periodically measure the electromotive force of the controllable pitchpropeller) system using an A/D converter of NI. This study analyzed the generation and characteristics of accumulator electromotive force for CPP and considered the installation location of the grounding system to remove the accumulator electromotive force.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.437-444
• /
• 2010

This paper deals with the attitude control of an underactuated spacecraft that has one single-gimbal variable-speed CMG. An underactuated spacecraft may not converge to arbitrary attitudes if its total angular momentum is not zero. To stabilize a spacecraft, the CMG has to align with the angular momentum in the inertial frame. Four different install configurations for the CMG have been considered and controllable angular momentums have been analyzed. Also, based on the backstepping method, stabilizing control laws have been presented and their properties have been compared.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.6
• /
• pp.257-264
• /
• 2013

In this study, we have designed the variable amplitude threshold algorithm that can enhance the accuracy of step count using variable amplitude. This algorithm converts the x, y, z sensor values into a single energy value($E_t$) by using SVM(Signal Vector Magnitude) algorithm and can pick step count out over 99% of accuracy through the peak data detection algorithm and fixed peak threshold. To prove the results, We made the noise filtering with the fixed amplitude threshold from the amplitude of energy value that found out the detection error was increasing, and it's the key idea of the variable amplitude threshold that can be adapted on the continuous data evaluation. The experiment results shows that the variable amplitude threshold algorithm can improve the average step count accuracy up to 98.9% at 10 Hz sampling rate and 99.6% at 20Hz sampling rate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.57-66
• /
• 2022

The Road Management Administration is cracking down on overloaded vehicles by installing low-speed or high-speed WIMs at toll gates and main lines on expressways. However, in recent years, the act of intelligently evading the overloaded-vehicle control system of the Road Management Administration by illegally manipulating the variable axle of an overloaded truck is increasing. In this manipulation, when entering the overloaded-vehicle checkpoint, all axles of the vehicle are lowered to pass normally, and when driving on the main road, the variable axle of the vehicle is illegally lifted with the axle load exceeding 10 tons alarmingly. Therefore, this study developed a technology to detect the state of the variable axle of a truck driving on the road using roadside camera images. In particular, this technology formed the basis for cracking down on overloaded vehicles by lifting the variable axle after entering the checkpoint and linking the vehicle with the account information of the checkpoint. Fundamentally, in this study, the tires of the vehicle were recognized using the Mask RCNN algorithm, the recognized tires were virtually arranged before and after the checkpoint, and the height difference of the vehicle was measured from the arrangement to determine whether the variable axle was lifted after the vehicle left the checkpoint.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.547-548
• /
• 2011

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.183-188
• /
• 2010

In this paper we propose a detection method of the medial axis of the continuous stripes on the LoG scale-space. Our method detects the medial axis of continuous stripes iteratively by varying the scale of LoG operator. Small-scale LoG operator detects two +/- pole pairs centered on the edge positions of stripe by the zero-crossing detection. The more increase the scale of LoG scale-space, the more close two poles to the medial axis of stripe. The medial axis of continuous stripe is the position where two poles is overlapped. The proposed method detected robustly the medial axis of continuous stripes stronger than the thinning methods used to binary image.