• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1170-1174
• /
• 2009

Two frequency-reconfigurable antennas have been designed and combined in a space with limited volume, i.e., 40mm ${\times}$ 20mm ${\times}$ 6mm. Each antenna can be reconfigured to operate at different frequency bands depending on the state of an embedded switch, which is implemented using a PIN diode. The first antenna can be switched between 0.82GHz ${\sim}$ 0.96GHz band (GSM/ CDMA) and 1.7GHz ${\sim}$ 2.17GHz band (DCS/ PCS/ WCDMA), which are cellular bands. The second antenna can be switched between 3.4GHz ${\sim}$ 3.6GHz band (mWiMax) and 2.3GHz ${\sim}$ 2.5GHz, 5.15GHz ${\sim}$ 5.35GHz bands (WiBro/ WLAN 11a/b/g/n), which are connectivity bands. The proposed combined antenna operates both over cellular bands and connectivity bands concurrently. The choice of the operation bands is made independently by the states of the two switches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.714-720
• /
• 2009

In this paper, design and the implementation method of a band-tunable ultra-wideband planar doubler are described Microstrip-to-CPS(balun) transition and Microstrip-to-CPW transition are respectively used for input/output matching circuits for the doubler. The Input balun structure allows to apply diode bias, and the doubler output frequency is tunable by changing the diode bias voltage. With the bias voltage of -0.6 V, the measured operating frequency band of the implemented doubler is $10{\sim}20$ GHz, with the bias voltage of $-0.2{\sim}-0.4$ V, the operating frequency band is $10{\sim}30$ GHz, and with 0 V bias, the operating frequency band is $20{\sim}30$ GHz. The doubler provides conversion loss of less than 15 dB and fundamental frequency suppression of 30 dB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.169-177
• /
• 2012

A non-decimation second-order spatial moving average (SMA) discrete-time (DT) filter is proposed with reconfigurable null frequencies. The filter coefficients are changeable, and it can be controlled by switching sampling capacitors. So, interferers can be rejected effectively by flexible nulls. Since it operates without decimation, it does not change the sample rate and aliasing problem can be avoided. The filter is designed with variable weight of coefficients as $1:{\alpha}:1$ where ${\alpha}$ varies from 1 to 2. This corresponds to the change of null frequencies within the range of fs/3~fs/2 and fs/2~2fs/3. The proposed filter is implemented in the TSMC 0.18-${\mu}m$ CMOS process. Simulation shows that null frequencies are changeable in the range of 0.38~0.49fs and 0.51~0.62fs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.348-355
• /
• 2019

UHF and microwave RFID systems are widely applied in various fields because they can read a plurality of tag information within a radius of several meters ahead of the RFID reader. However, they cannot detect the position of the tag in applications that recognize only a tag at a specific position. In this study, we propose a new RFID system that can interrogate the tag of a specific location selectively by using the position information of the tag. This can be done by only adjusting the reader's operating frequency. To verify the feasibility of the proposed system, we implemented a 2.4 GHz RFID reader whose frequency can be varied by using a phase-locked loop circuit and a backscattered tag. Experimental results confirm that the tag position can be sensed exactly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.421-427
• /
• 2004

A low cost solution employing harmonic oscillation to the frequency synthesizer at 5.8 ㎓ is proposed. The proposed frequency synthesizer is composed of 2.9 ㎓ PLL chip, 2.9 ㎓ oscillator, and 5.8 ㎓ buffer amplifier The measured data shows a frequency Outing range of 290 ㎒, ranging from 5.65 to 5.94 ㎓ about 0.5 ㏈m of output power, and a phase noise of -107.67 ㏈c/㎐ at the 100 ㎑ offset frequency. All spurious signals including fundamental oscillation power(2.9 ㎓) are suppressed at least 15 ㏈c than the desired second harmonic signal.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.162-164
• /
• 2018

스위칭 주파수의 대역 확산 (Spread Spectrum) 기법은 전력 변환 장치의 전자 방해 잡음 (Electromagnetic Interference; EMI)를 줄일 수 있다. 하지만 공진형 컨버터는 스위칭 주파수 가변을 통해 출력 전압을 제어하기 때문에 스위칭 주파수의 대역 확산 기법을 적용하게 되면 출력 전압이 크게 흔들리게 된다. 본 논문은 LLC 공진형 컨버터에 대역 확산 기법을 사용함과 동시에 확산된 스위칭 주파수 대역의 위상 제어를 통해 출력 전압을 제어하는 방법을 제시하고자 한다. 제안하는 출력 전압 제어 성능 향상 및 전자방해잡음 감소 성능은 500 W 프로토타입 컨버터를 사용하여 검증하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.95-100
• /
• 1996

In this paper, we present an image coder using variable quantizer for newly proposed JPEG extensions which has been standardized as ISO/IEC 10918-3(ITU-T Rec. T.84). It is necessary to alleviate the blocking artifact which is more sensitive to human eye in view of the spatial frequency sensitivity. The blocking artifact arises in the lower activity area rather than in the higher area. Therefore variable quantizer use the horizontal and vertical derivatives for calculating the $8{\times}8$ block activity. We classified nonlinear quantizer parameter into 5 categories in order to finely quantize in the lower active region. As a result of simulation for various images, the proposed coder increases subjective and objective quality at a given bit rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.103-110
• /
• 2020

Bio-inspired underwater robots have been studied to improve the dynamic performance of fins, such as swimming speed and efficiency, which is the most basic performance. Among them, bio-inspired soft robots with a compliant tail fin can have high degrees of freedom. On the other hand, to improve the driving efficiency of the compliant fins, the stiffness of the tail fin should be changed with the driving frequency. Therefore, a new type of variable stiffness mechanism has been developed and verified. This study, which was inspired by the anatomy of a real dolphin, assessed a process of designing and manufacturing a robotic dolphin with a variable stiffness mechanism. By mimicking the vertebrae of a dolphin, the variable stiffness driving part was manufactured using subtractive and additive manufacturing. A driving tendon was placed considering the location of the tendon in the actual dolphin, and the additional tendon was installed to change its stiffness. A robotic dolphin was designed and manufactured in a streamlined shape, and the swimming speed was measured by varying the stiffness. When the stiffness of the tail fin was varied at the same driving frequency, the swimming speed and thrust changed by approximately 1.24 and 1.5 times, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.288-297
• /
• 2012

This study proposes a design model of the variable type resonator which corrects the temperature variance according to the season, in order to maximize the resonance effect in the Sacred bell of the Great King Seongdeok. In the bell, the 1st natural frequency (64 Hz) and the 2nd natural frequency (168 Hz) are the most important partial tones. Resonance conditions of the two components are determined for the internal acoustic cavity system, which consists of bell body cavity, gap and the resonator. Acoustic frequency response characteristics of the internal cavity are determined by the boundary element analysis using SYSNOISE. As an external factor, temperature variance according to the season largely influences the resonance condition and the length of the resonator should be controlled to maximize the resonance effect. As a measure, this study proposes a design model of the variable type resonator for the Sacred Bell of the Great King Seongdeok, which can control the length at the belfry according to the season.

• Journal of the KSME
• /
• v.16 no.4
• /
• pp.12-18
• /
• 1976

기계 및 구조물들이 등진폭하중만을 받는 경우는 극히 드물어서 대부분이 진폭과 주파수가 불규 칙하게 변하는 하중을 받는다. 실하중이력이 불규칙(random)한 모양을 갖는 것은 비행기, 자동차, 선박 등의 많은 기구물들이 공기의 터블런스, 거치론 도로표면 및 대양의 파도와 같이 random한 주위환경에 접하기 때문이다. 이 random한 환경과 구조물의 탄성성질들로 인해서 구조물로부터 측정된 하중응답신호들(응신율,변위 혹은 가속도)은 건폭과 주파수가 random하게 변하는 특정한 형태의 파형을 갖는다. 현금 우리나라에 이 방면의 연구가 활발하지 못하여 complex load history가 피로에 미치는 영향과 이에 관련된 피로시험들을 간략히 소개한다.