• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1389-1398
• /
• 2009

This research suggests the calculation and analytic method of determining the proper numbers of manual workers with simulation and DEA methods. For this, first of all we designed and analysed the simulation model of real facility being built in Dea-Jun. Secondly, we find the solution with DEA among various alternatives built based on the results of the simulation analysis. In the simulation process, the waiting time, the number of painted trains, and utilization of main equipment are considered as main response variables. After simulation, we built DMUs(Decision Making Unit) consisting of combined results with the manpower assignment policies, the numbers of workers, and the rate of skilled operators, and calculated the efficiency of DMUs with the DEA method. Among 27 DMUs, 4 DMUs turned out efficient technically and on scale. In conclusion, through the suggested procedure, this research shows the way that decision makers can solve the problems with various factors they should concern, along the scientific process, when building a new facility.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.1
• /
• pp.47-53
• /
• 2013

Standard Incident Command System in Korea is that Incident Command System for Emergency Rescue Operation, which is commanded only by Fire Fighting Agencies. However, in the event of a disaster such as the flood, storm, or landslide disaster, there are many disaster response activities performed by the General Public Officers at the disaster on-scene. Yet, there isn't an Natural Disaster Command System for the General Public Officers in Korea. Thus, we have studied the response activities needed cooperation among agencies and proposed some considerations of the Natural Disaster Command System for General Public Officers. The system will be useful to response and recover disaster rapidly, seamlessly, and cooperatively among General Public Officers and the related agencies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.475-480
• /
• 2010

The thermal barrier coating of a gas turbine blade was degraded by isothermal heating in a furnace and by varying the exposure time and temperature. Then, a micro-Vickers hardness test was conducted on the cross section of the bond coat and Ni-based superalloy substrate. Further, the thickness of TGO(Thermally Grown Oxide) was measured by using an image analyzer, and the changes in the microstructure and element contents in the coating were analyzed by using an optical microscope and by performing SEM-EDX analysis. No significant change was observed in the Vickers hardness of the bond coat when the coated specimen was degraded at a high temperature; delamination was observed between the top coat and the bond coat when the coating was degraded for 50 h at a temperature $1,151^{\circ}C$.

• Journal of Chest Surgery
• /
• v.37 no.11
• /
• pp.929-932
• /
• 2004

The estimated relative incidence of primary pulmonary sarcoma to lung cancer is 0.4%. Furthermore, osteogenic sarcoma of the pulmonary artery is extremely rare. We report a case of a 63-year-old woman who visited our emergency room with the chief complaints of chest pain, dyspnea and dizziness. On echocardiography, right heart failure due to acute pulmonary artery embolism was diagnosed and we performed emergency operation. After opening the main pulmonary artery trunk, we found a mass attached to the arterial wall and massive thrombi around the mass. The mass was diagnosed as primary pulmonary artery osteosarcoma through postoperative evaluation. The patient received chemotherapy and radiotherapy. The patient is alive without specific symptoms 16 months postoperatively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.411-419
• /
• 1999

It has been well recognized that a long term service at elevated temperature of $350^{\circ}C{\sim}550^{\circ}C$ induces embrittlement damage due to carbide precipitation and/or P, Sb and Sn segregation at grain boundaries and thereby deteriorates the grain boundary strength of heat resisting components in the energy-related plants. Therefore, it is very important to assess quantitatively the extent of embrittlement damage of heat resisting components to secure the reliable and efficient service condition and to prevent brittle failure in service. However, because fracture tests are limited in size and number of specimen obtained from the structural components, nondestructive test method is required. In this study, the optimum electrochemical parameters are investigated and discussed to evaluate nondestructive embrittlement damage for aged 2.25Cr-1Mo steels by means of electrochemical polarization test method (ECPTM) in proper corrosive environment. In addition, the electrochemical test results are compared with embrittlement degree evaluated by semi-nondestructive SP test.

• 연구논문집
• /
• s.30
• /
• pp.101-110
• /
• 2000

Weft insertion mechanism is for completing the structure of yarn and weft yarn and its driving method is screw type. In the high speed rapier loom, weft yarn is thrown by insert rapier and carrier rapier into the shed which make divide two parts of upper part ant lower part for warp yarn. It is possible for this mechannism to reduce the size of rapier and wheel, and directly connected to the main shaft without gear belt. Therefore, exact rapier motion through realization of arbitrary acceleration diagram requested rapier and optimal design for high speedization and operating rate increasing are necessary. In this study, with a view to exact system analysis for understanding of overall trace and high speedization of rapier loom through computer simulation. we report not only deduction of displacement, velocity, and acceleration components of rapier for analysis theory establishment, of weft insertion mechanism and exact motion induction according to screw rotation, but also development of simulation program for realization these on the monitor.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.105-112
• /
• 1987

Some anatomical characterisitcs of Japanese red pine (Pinus densiflora S. et Z.) collected from pollution-exposed areas in Korea were investigated. These sites were reportedly the most severe air polluted areas in Korean peninsular. A decline in overall growth rate was apparent since the late 10-year period of growth. P. densiflora in Onsan and in Yeochon recorded in the radial growth reduction of approximately 70 and 60% respectively. The formation of earlywood in the period of air pollution was restricted, whereas the percentage of latewood increased. The maximum wood density was lower in xylem rings formed during a period of air-pollution than in rings found without pollution. Most of pine trees damaged by air pollution showed the classical type of length-on-age curve for tracheids. However, reduction in cell wall-thickness and diameter was revealed in the wood exposed to air pollutants. Nor anomalies in microstructures nor microorganisms in wood structures were found in the damaged trees.

• Journal of Agricultural Extension & Community Development
• /
• v.6 no.2
• /
• pp.75-84
• /
• 1999

Minnesota state law requires County Extension Committees (CECs). The County Board of Commissioners appoints committee members. Extension Educators are responsible for using CECs to assure the value of Extension work in the County. This paper will explore underlying values, principles and practices that can effect the utilization of CECs in ways that benefit the work of Extension and make the process a good experience for CEC members and Extension Educator. The paper is based primarily on readings in the Journal of Extension, interviews with two Extension Educator, and information provided by the University of Minnesota Extension Service for CEC members.

• Journal of Radiation Protection and Research
• /
• v.15 no.1
• /
• pp.9-13
• /
• 1990

1959년 한국원자력연구소가 창립됨과 동시에 &Health Physics&, 즉 보건물리라고 하는 명칭과 조직이 탄생되어, 방사선안전관리의 실무와 보건물리의 연구가 시작되었다. 최초 10년간은 선진제국의 보건물리분야의 연구와 기술을 추적하여 우리나라의 방사선안전관리 기술의 기초를 다지는 시기로서 개인방사선모니터링기술, 환경방사선(능) 모니터링기술 및 방사선방어용계측기기의 교정기술 개발에 중점을 두고 연구개발이 추진되었으며, TRIGA Mark-II 연구용원자로의 가동에 따라 원자로 생체차폐체의 건전성 검증에 관한 유익한 방사선량 측정자료도 얻게 되었다. 즉 이 기간은 방사선안전관리의 체제정비 및 기초기술 확립에 노력한 기간이었다. 1970년대는 원자력 연구개발에 대한 기본방향과 정책의 변경등으로 보건물리 연구조직은 방사선안전관리, 환경연구 그리고 방사화학분야로 분산되었으며, 그로인하여 연구개발활동은 거의 정체되어 겨우 방사선안전관리 실무만이 그 명맥을 유지하였다. 그 결과 우리나라 방사선안전관리 및 그와 관련된 연구개발의 기반이 흔들리게 되었으나, 그러한 환경하에서도 방사선량측정평가기술, 방사선차폐설계기술 및 원자로사고시 피폭선량평가기술의 선진화에 필요한 지식을 얻었으며, 방사선 안전관리에 유익한 실무경험도 축적하게 되었다. 1980년대는 통합된 원자력 연구개발체제의 구축으로 방사선작업종사자 및 일반공중의 피폭저감화 기술개발에 필요한 각종 최신기술을 도입하였고, 관리업무에 있어서도 측정의 정확도와 신뢰성향상 및 새로운 관리기술의 개발에 많은 노력을 한 결과, 유익한성과를 얻게된 기간이다. 특히, 이 기간은 방사선안전관리기술의 선진화를 위한 지식이 축적되어 90년대의 방사선안전관리기술자립화를 위한 전환기로서, 이와같이 축적된 기술은 원자력의 평화적 이용에 크게 기여할 것으로 기대된다.서 dithiothreitol를 투여한 군에서는 우라늄단독투여군에 비해 cretinine의 배설이 상당히 증가하였다(P<0.05). 6. 우라늄오염에 의한 신장의 소견에 있어 우라늄단독투여군은 근위곡세뇨관상피의 공포화 및 종창, microvilli와 brush border의 손실, 세뇨관 상피의 괴사가 관찰되었으며, 간장의 충혈, 중심성 괴사 및 모세관 확장증도 관찰되었다. 그리고 sodium bicarbonate와 생리적 식염수를 병행투여한 군과 우라늄을 투여하고 30분이 지나서 dithiothreitol를 투여한 군에서는 우라늄 단독투여군에 비해 높은 방호효과가 관찰되었으나 다른 실험군에서는 큰 효과가 없는 것으로 나타났다. 결론적으로 우라늄의 체내오염시에는 sodium bicarbonate와 생리적 식염수를 가능한 빨리 병행투여하거나 dithiothreitol을 체내오염후 30분이 지나서 투여하는 방법이 우라늄오염에 대한 제염에 매우 유효할 것으로 생각되며, 특히 우라늄에 의한 인체장해를 유의하게 경감시켜줄 것으로 사료되었다.내의 어떤 부위와도 관계가 되는 것으로 간주되는데 이것이 $(^3H)$ QNB가 $(^3H)$ NMS보다 높은 최대 결합능력 $(B_{max})$을 나타낼 이유이다. (b) 두 종류의 다른 제제에서 우리는 같은 양상의 결과를 관찰하었기에 결점이 많은 homogenates 제제보다는 intact cell aggregates 제제를 수용체 연구에 대한 새로운 실험모형(experiment model)으로 사용할 수 있는 가능성을 제시하고자 한다.$가 38.8%로 가장 많고, 그 다음이 ${\ulcorner}$l9세(歲)이후${\lrcorner}$가 25.2%로서 전체

• Journal of Chest Surgery
• /
• v.34 no.9
• /
• pp.653-661
• /
• 2001

Background: Retrograde cerebral perfusion(RCP) is one of the methods used for brain protection during aortic arch surgery. The author previously published the data, however, for the safety of it, there still remains many controversies. The author performed RCP and checked various parameters to clarify the possibility of early detection of cerebral injury. Material and Method: The author used pigs(Landrace species) weighing 25 to 30kg and performed RCP for 120 minutes. After weaning of cardiopulmonary bypass, we observed pigs for another 120 minutes. Rectal temperature, jugular venous oxygen saturation, central venous pressure were continuously monitored, and the hemodynamic values, histological changes, and serum levels of neuron-specific enolose(NSE) and S100$\beta$ protein were checked. Central venous pressure during RCP was maintained in the range of 20 to 25 mmHg. Result: Flow rates(ml/min) during RCP were 224.3$\pm$87.5(20min), 227.1$\pm$111.0(40min), 221.4$\pm$119.5(60min), 230.0$\pm$136.5(80min), 234.3$\pm$146.1(100min), and 184.3$\pm$50.5(120min). Serum levels of NSE did not increase after retrograde cerebral perfusion. Serum levels of S100$\beta$ protein(ng/ml) were 0.12$\pm$0.07(induction of anesthesia), 0.12$\pm$0.07(soon after CPB), 0.19$\pm$0.12(20min after CPB), 0.25$\pm$0.06(RCP 20min), 0.29$\pm$0.08(RCP 40min), 0.41$\pm$0.05(60min), 0.49$\pm$0.03(RCP 80min), 0.51$\pm$0.10(RCP 100min), 0.46$\pm$0.11(RCP 120min), 0.52$\pm$0.15(CPBoff 60min), 0.62$\pm$0.15(60min after rewarming), 0.76$\pm$0.17(CPBoff 30min), 0.81$\pm$0.20(CPBoff 60min), 0.84$\pm$0.23(CPBoff 90min) and 0.94$\pm$0.33(CPBoff 120min). The levels of S100$\beta$ after RCP were significantly higher than thosebefore RCP(p<0.05). The author could observe the mitochondrial swellings using transmission electron microscopy in neocortex, basal ganglia and hippocampus(CA1 region). Conclusion: The author observed the increase of serum S100$\beta$ after 120 minutes of RCP. The correlation between its level and brain injury is still unclear. The results should be reevaluated with longterm survival model also considering the confounding factors like cardiopulmonary bypass.