• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.581-585
• /
• 1999

The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.524-536
• /
• 1994

Chitosan is known to be a good biocompatible natural polymer. Polyethyleneglycol monomethacrylates(PEGM) were grafted onto chitosan and their reaction conditions and properties of the graft polymers obtained were estimated. Using ceric ammonium nitrate(CAN) as the initiator, the optimum condition for graft polymerization was determined amount of the initiator and monomer concentrations and reaction time. Grafting yields such as total conversion, the percentage of grafting and the efficiency of grafting were calculated and examined the optimum reaction condition for high grafting yields. The percentage of grafting and total conversion were maximum at condition that the concentration of initiator was $4{\sim}5{\times}10^{-3}M$, the concentration of monomer was 0.5~0.6M, the reaction time was 2~3 hours and the reaction temperature was about $40^{\circ}C$. Thermal characteristics, solubility for chitosan solvents and inherent viscosity of synthesized graft copolymers were investigated. In high initiator concentration, characteristics of chitosan were greatly diminshed. In case of inherent viscosities, chitosan-g-PE-90 was 2.81 dl/g, chitosan-g-PE-200, 3.01dl/g and chitosan-g-PE-350, 4.93dl/g. And a tendency of viscosity increase depending on the length of ethylene oxide residue was confirmed. Degree of swelling, tensile strength, elongation of membrane prepared from graft copolymers were determined. Properties of graft copolymers were affected by percentage of grafting and length of ethylene oxides residue in polyethylene glycol monomethacrylates. Tensile strength, elongation and degree of swelling of graft copolymers were remarkably improved than chitosan. As percentage of grafting increased, the amount of drug permeation was also increased.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.431-449
• /
• 2020

Structural property of most hydrogels is soft, resulting in low mechanical performance that limits their usage in the biomedical applications. For overcoming the drawback, cellulose nanocrystals (CNCs) were adopted in this study. Effects of CNCs on characteristics and drug delivery performance of poly (vinyl alcohol) based hydrogels were explored. FT-IR results showed that the fabricated hydrogels had semi-IPN (semi-interpenetrating polymer network) by formation of acetal and aldehyde bridge. Water absorption and swelling ratio decreased with increasing CNCs content, and the hydrogels with CNCs showed better viscoelastic performance than the without CNCs. Also, CNCs mostly improved the ability of the hydrogel to absorb the drug and the sustainability of the drug release. These results demonstrated that incorporating CNCs into the hydrogel systems can be a good alternative to improve drug delivery performance and mechanical property of the hydrogels.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.190-196
• /
• 1983

This experiment was carried out to compare the change of muscle protein compositions, amino acid compositions of muscle protein, and free amino acid compositions by age of the Israeli strain of common carp, Cyprinus carpio nudus. Protein compositions of the muscle were: sarcoplasmic protein $25.8-27.2\%$, myofibrillar protein $62.3-56.2\%$, residual intracellular protein $9.6-13.2\%$ and stroma $2.3-2.9\%$. In between 1 year and 3 years, there were differences as follows; myofibrillar protein in 1 year was much than 3 years, and other proteins in 3 years were much than 1 year. By SDS-polyacrylamide gel electrophoresis, sarcoplasmic protein of the samples in 1 year an 3 years were composed of 11 subunits and 10 subunits, respectively. And appeared 210,000 dalton component in 1 year but did not appeared in 3 years. Myofibrillar protein was composed of 23 subunits in both 1 year and 3 years but the differences of subunits by age were not observed. No differences were observed by age in the composition of myofibrillar protein and residual intracellular protein. Amino acid composition of muscle protein in both 1 year and 3 years were no differences to each other, but the contents of glutamic acid, aspartic acid, lysine were higher than other amino acids. The amount of total free amino acid in 1 year was much than in 3 years.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.593-602
• /
• 1988

Polymer-supported crown ethers (Ps-CE) which can be used for phase-transfer catalyst (PTC) were synthesized for the purpose of allowing reusable function to ordinary crown ethers, and the kinetics of the liquid-solid-liquid triphase-catalyzed nucleophilic displacement reaction of iodide (aqueous phase) on 1-bromooctane (organic phase) using synthesized Ps-CE (solid) were studied. Ps-CE were obtained by grafting of hydroxymethyl crown ethers to 1~2% cross-linked chloromethylated polystyrene. All reactions followed a pseudo-first order dependency on the 1-bromooctane concentration and the observed rate constants $(k_{obsd})$ were linearly related to the molar equivalents of Ps-CE, and were subjected to the influence of cross-linking density of polymer backbone, solvent and the reaction temperature. The catalytic activity of Ps-CE was also compared with that of structurally similar soluble crown ethers, and used Ps-CE were easily recovered after the reaction by simple filtration and could be reused without loss of catalytic activity in the same anionic displacement reaction. Enthalpies and entropies of activation associated with the displacement were 10~20kcal $mol^{-1}, 20~55eu. respectively, and the free energy of activation was ~30kcal mol^{-1}$.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.39-49
• /
• 2006

1. 목 적 이 연구의 목적은 성견의 하악 골 결손부에 이식한 생체 유래 골 이식재에 대한 치조골의 반응을 알아보는 것이다. 2. 연구방법 및 재료 생후 1년 이상 된 성견 4마리의 하악 제2소구치 및 제 4 소구치를 발거하고 발치와에 금원심 폭경 8mm, 협설 폭경 5mm, 치조정에서의 깊이 6mm인 결손부를 형성하였다. 4주간의 자연 치유 후 판막을 형성하여 결손부의 크기를 확인하였다. 각각의 결손부 크기가 일정하도록 수정한 후 '이식재+차폐막'군에는 OCS-B을 이식하고 Bio-gide을 차단막으로 사용한 후 봉합하고 '이식재군'은 OCS-B 이식 후 차폐막 없이 봉합하였으며 '비이식'군은 아무런 처치없이 일차봉합하였다. 수술 4, 6주에 실험동물을 각각 희생시켜 실험부위를 적출하고 비탈회 연마 표본을 제작하여 골 치유 양성을 조직학적 및 조직계측학적으로 관찰하였다. 3. 연구결과 이식재 비이식군 및 이식군 모돼서 별다른 부작용없이 잘 치유되었다. 세 실험군 모두에서 술후 4주에 비교하여 술 후 6주에서의 결손부 산생골 형성량이 증가하였다. 술후 4주 소견에서 비이식군은 결손부 주변부위에서 골이 생성되어 나오는 양상을 보였으며 이식군은 이식재 주변으로 골침착 시작되는 것을 관찰할 수 있었다. 술후 6주 소견에서 비이식군은 결손부 경계부로부터의 지속적인 골 생성을 관찰할 수 있었으며 이식군은 이식재 주변으로 침착된 골의 양이 많아지고 신생골이 가교를 형성하는 것을 관찰할 수 있었다. 4. 결 론 차폐막 유무와 상관없이 OCS-B는 염증반응을 전혀 일으키지 않았으며 우수한 골 전도성을 보였다. 또한 결손부의 형태를 잘 유지하여 골재생을 위한 공간을 확보할 수 있었다. 이는 OCS-B가 골이식재로서의 필요조건을 갖추었음을 확인한 결과이며 보다 장기적인 관찰에서 OCS-B의 흡수 가능성을 확인하는 것이 필요할 것으로 보인다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.3
• /
• pp.223-230
• /
• 2017

In this study, we evaluated the skin moisturizing effect of Brasenia schreberi (B. schreberi) mucilage polysaccharide on human skin and in vitro and the potent cosmetic ingredient for skin. To protect skin from various environmental stresses and aging, we should increase moisture content of skin and prevent water loss. We have found that polysaccharides extracted from mucilage of B. schreberi improved the roughness of skin with its lubricating behavior. In vitro, the expression of transglutaminase 1 (TGM1) gene, which plays a role in cross-linking the skin barrier, was increased when the keratinocytes were treated with B. schreberi polysaccharides. In addition, the expression of hyaluronan synthase 3 (HAS3) gene, an enzyme that synthesizes water-binding matrix hyaluronic acid, aquaporin 3 (AQP3), which regulates the movement of water and glycerol were also increased. In addition, an experiment to evaluate its potential as a cosmetic ingredient has shown anti-inflammatory and collagen synthesis-promoting effects. As a result, the mucilaginous polysaccharide from natural products which has not existed before, showed moisturizing effect, anti-inflammation and collagen synthesis-promoting effects for skin protection and hydration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.6
• /
• pp.727-731
• /
• 2009

Effects of various plasticizers (1.5%) such as glycerol, sorbitol, fructose, sucrose, and polypropylene glycol, and ferulic acid on the physical properties of Gelidium corneum (GC) film were examined. GC films containing plasticizer and ferulic acid were prepared by incorporating various amounts (10, 30, 50, 70, 100 mg/100 mL) of ferulic acid into the film. Water vapor permeability (WVP) of the GC film varied depending on the type of plasticizer, and among them the film containing sucrose had the lowest WVP. Tensile strength (TS) and % elongation (%E) of the film were in the range of $1.29{\sim}11.29$ MPa and $5.55{\sim}36.44$ %, respectively, and the WVP values were of $1.30{\sim}1.60\;ng\;m/m^{2}sPa$. In addition, the GC films were prepared using ferulic acid as a cross-linking agent. WVP of the film decreased with the addition of ferulic acid, and the film containing 30 mg ferulic acid had the lowest WVP value. TS value of the GC film containing 10 mg of ferulic acid was significantly higher than that of the control. However, further increase of ferulic acid concentration decreased the TS value. Therefore, 10 mg of ferulic acid was determined to be the optimal concentration for the film.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.404-411
• /
• 2004

The microcapsules containing triphenyl phosphate (TPP), a flame retardant, were prepared by phase-inversion emulsification technique using the epoxy resin (Novolac type) with excellent physical properties and network structure. This microencapsulation process was adopted for the protection of TPP evaporation and wetting of polymer composite during the polymer blend processing. The TPP, epoxy resin and mixed surfactants were emulsified to oil in water (O/W) by the phase inversion technology and then conducted on the crosslinking of epoxy resin by in-situ polymerization. The capsule size and size distribution of TPP capsules was controlled by mixed surfactant ratio, concentration and TPP contents, The formation and thermal property of TPP capsules were measured by differential scanning calorimetry and thermogravimetric analysis. The morphology and size of TPP capsules were also investigated by scanning and transmission electron microscopies. As the surfactant concentration increased, the TPP capsules were more spherical and mono-dispersed at the same weight ratio of mixed surfactants (F127: SDBS).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.70-72
• /
• 1998

1. 서론 : 최근에 폐수나 지하수 및 음용수에 존재하는 휘발성 유기화합물(Volatile Prganic Compound, VOC)는 심각한 환경오염이 주범이 되고 있다. 이러한 문제를 해결하는 방법으로 흡착, 증류, air stripping 등의 여러 가지 분리기술이 제시되어 왔다. 그러나 전통적인 방법들은 분리된 오염물질이 제2의 상으로 전이된다는 점에서 또 다른 분리공정을 필요로 하는 단점을 지니고 있다. 이에 반해 투과증발공정은 추가적인 분리과정이 없이 효율적으로 오염된 물속의 유기용매를 제거한다는 점에서 많은 관심을 모으고 있다. 이미 알려진 이러한 VOC 제거에는 소수성이면서 고무상인 고분자가 우수한 특성을 가지는 것으로 밝혀졌고 그 중에서 실록산계 고분자가 아주 효과적인 것으로 알려져 있다. 그러나 이러한 실록산계 고분자는 기계적 강도가 약하여 필름의 박막형성능력이 떨어지는 것으로 알려져 있어 이러한 단점을 보완하기 위해 가교구조의 도입이나 공중합체의 구조를 도입하는 연구가 많이 수행되어 왔다. 이러한 연구의 한 방법으로 실록산-아미드공중합체를 이용하여 투과증발에 적용한 연구는 수행되어 왔다. 이들의 제막방법으로 주로 실록산다이아민/방향족다이아민의 비를 달리하거나 실록산다이아민의 분자량의 변화를 달리하면서 실록산-이미드 블록 또는 그래프트중합체를 제조하는 방법을 사용하였다. 이 실험에서는 주로 실록산-이미드의 비율이 낮아지면 유기용매의 선택성에서 물의 선택성으로 바뀌는 percolation point가 관찰되며 이것은 실록산-이미드의 비율이 낮을수록 물속의 유기용매의 제거에 유리하다는 것을 보여준다. 이에 따라 실록산다이아민과 다이안하이드라이드만을 사용한 실록산이미드막이 추천되나 여기에 대한 투과특성연구는 전혀 이루어지지 않았다.정육점이었고 백화점과 재래닭 사육장에서 직접구입도 하고 있었다. 구입 동기는 가족들이 좋아하고 영양가를 생각한다가 62%였으며 구입정보는 주위사람의 권유로 구입하고 있었다. $\bigcirc$ 구입할 때 중점적으로 살펴보는 사항은 신선도와 순수재래종 여부, 위생상태였다. 한편 소비자가 언제나 구입할 수 없다는 의견이 85.2%나 되어 원활한 공급과 시장조성이 아직 정착되지 않고 있었다. $\bigcirc$ 현재 유통되고 있는 재래종닭은 소비자 대부분이 잡종으로 인식하고 있었으며, 재래종과 일반육계와의 구별은 깃털색, 피부색, 정강이색등 외관상으로 구별하고 있었다. 체중에 대한 반응은 너무 작다는 의견이었고, 식품으로의 인식도는 비교적 고급식품으로 인식하고 있다. $\bigcirc$ 재래종닭고기의 브랜드화에 대한 견해는 젊고 소득이 높은 계층에서 브랜드화의 필요성을 강조하고 있다. $\bigcirc$ 재래종달걀의 소비형태는 대부분의 소비자가 좋아하였으나 아직 먹어보지 못한 응답자가 많았다. 재래종달걀의 맛에 대해서는 고소하고 독특하여 차별성을 느끼고 있었다. $\bigcirc$ 재래종달걀의 구입장소는 계란판매점(축협.농협), 슈퍼, 백화점, 재래닭 사육 농장등 다양하였으며 포장단위는 10개를 가장 선호하였고, 포장재료는 종이, 플라스틱, 짚의 순으로 좋아하였다. $\bigcirc$ 달걀의 가격은 200원정도를 적정하다고 하였으며, 크기는 (평균 52g)는 가장 적당하다고 인식하고 있으며, 난각색은 대부분의 응답자가 갈색을 선호하였다. $\bigcirc$ 재래종달걀의 구입시 애로사항은 믿을수 없고, 구입장소를 몰라서, 값