• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.152-164
• /
• 2018

Fermented seasoning pastes were prepared by Aspergillus oryzae and Bacillus subtilis using three edible insects, Tenebrio molitor larvae (TMP), Gryllus bimaculatus (GBP), and Bombyx mori pupa (SPP), with soybean (SBP) as a negative control. Volatile compounds were extracted by the headspace solid-phase microextraction (HS-SPME) method and confirmed by gas chromatograph-mass spectrometry (GC-MS). In total, 121 volatiles from four samples were identified and sub-grouped as 11 esters, 18 alcohols, 23 aldehydes, 5 acids, 10 pyrazines, 2 pyridines, 7 aromatic hydrocarbons, 10 ketones, 19 alkanes, 9 amides, 4 furans and 3 miscellaneous. TMP, GBP, SPP and SBP had 48, 54, 36, and 55 volatile compounds, respectively. Overall, 2,6-dimethylpyrazine and trimethylpyrazine were found by a high proportion in all samples. Tetramethylpyrazine, a main flavor of doenjang, a Korean fermented seasoning soybean paste, was identified as one of the major compounds in TMP, SPP, and SBP. SBP had benzaldehyde, hexanal, n-pentanal, and aldehydes and SPP with pyrazines.

• Korean Journal of Food Science and Technology
• /
• v.5 no.3
• /
• pp.169-173
• /
• 1973

Secondary amines and nitrites in various daily foods have been known as the precursors of potent carcinogenic nitroso compound produced in the human stomach when they were ingested simultaneouly in high concentration. In this report, the amounts and distribution of secondary amines and nitrites in Korean daily foods, kim-chi, fishes, fish eggs, sausages, canned fish foods and fish sauces (salted fish) were studied.Nitrite contents were low in most subjected foods except in sausages. Secondary amines showed low contents in kim-chi, fishes, but high in fish sauces, fish eggs and canned fish foods. The result of this study suggested that the possible formation of carcinogenic nitrosamines during manufacturing, storage and cooking of all Korean foods should be studied.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.753-759
• /
• 2016

The processing properties of spent hen and broiler chicken were investigated before and after treatment to improve texture characteristics. Each treatment consisted steaming (S) with $85^{\circ}C$ for 20 min, Pulsed Electric Field (PEF) with 1.5 KV/cm for 4 sec, and Super Heated Steam (SH) with an oven temp. of $300^{\circ}C$, a steam temp. of $350^{\circ}C$ for 8 min. The yield of spent hen and broiler were 66.85% and 63.80% respectively in the control, but decreased in every treatment was lowest at 61.05% in the PEF treatment (p<0.05). In the color test, L value decreased, but the a and b values increased regardless of the species of spent hen or broiler. In the test of heating loss, the S treatment of spent hen had the highest result of 45.25% but lowest of 30.66% in the SH treatment of the broiler. When it was compared with various treatments, SH after PEF treatment showed the better result in terms of heating loss than the PEF or SH treatment respectively. In the test of texture, the broiler showed the lowest hardness of 5.57 kg in the SH (p<0.05). Otherwise, the spent hen resulted in 14.08 kg of hardness in steaming after PEF, but it improved significantly to 10.73 kg in SH after PEF. In the test of 9 scored sensory evaluation of overall palatability, 7.8 point was the best score with SH treatment in the broiler. The best score in spent hen was 6.3 point which was SH after PEF treatment. With this experiment, SH after PEF was the condition in the treatments to have the better texture of spent hen.

• Korean journal of food and cookery science
• /
• v.18 no.2
• /
• pp.216-224
• /
• 2002

Persimmon powder (PW), which was prepared by pulverizing freeze-dried persimmon with peels, was added to Maejakgwa up to 25% of wheat flour. Maejakgwa samples were prepared by the central composit experimental design for three independent variables: amount of PW, frying time, and frying temperature. The color of Maejakgwa was influenced more by the frying time and temperature than the content of added PW. Crispiness and adhesiveness were highly correlated with overall preference. Although the amount of PW affected the adhesiveness, the adhesiveness could be controlled by the frying temperature and time. Frying temperature was the most effective factor on the crispness and hardness. The addition of high amount of PW obviously increased the sweetness and aftertaste. However, at the low amount of PW, frying for longer time at high temperature also increased the sweetness and aftertaste. Center sample (15% PW, frying for 4 min at 145$\^{C}$) showed the best score at the overall preference. Overall preference was improved as the sample was fried at high temperature/short time or at low temperature/long time. Maejakwa prepared with high amount of PW at 20% showed no significant difference with the center sample for overall preference as prepared by frying for 3 min at 155$\^{C}$. The optimum condition obtained by superimposing color, crispiness and overall preference was frying for 5∼6 min at 131∼140$\^{C}$.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.564-573
• /
• 1999

Background: With variable symptoms and nonspecific radiographic appearances, pulmonary embolism (PE) is a frequent and often undiagnosed cause of mortality and morbidity. The Prospective Investigation of Pulmonary Embolism Diagnosis (PIOPED) study suggested that the majority of patients undergoing ventilation-perfusion (V-Q) scan would require additional studies to establish or to exclude the diagnosis of PE. Pulmonary angiography has been regarded as gold standard for diagnosis of PE. However, it is an invasive procedure that may be associated with significant notable morbidity and mortality. Thus, availability of an accurate, noninvasive screening examination is highly desirable. Method: From October 1994 to February 1997, twenty patients (male 13, female 7, range 23-91 years, median 58 years) who were suspected as pulmonary embolism on the basis of clinical evidence and underwent the spiral volumetric computed tomography (spiral CT), were studied retrospectively to evaluate the effectiveness of spiral CT as a diagnostic tool in PE. Results: PE could be excluded with spiral CT in 4 patients ; diagnoses of these patients were lung cancer, pneumonia with lung abscess, bilateral pleural effusion due to congestive heart failure, nonspecific pulmonary abnormality retrospectively. One patient who disclosed high probability in V/Q scan, could be diagnosed as pneumonia with lung abscess and underlying emphysema with spiral CT. Among 4 patients who showed intermediate and low probability in V/Q scan, 3 patients could be confirmed as PE with spiral CT. Spiral CT was helpful in 3 patients, in whom V/Q scan could not be performed due to other reasons (e.g. night time, mechanical ventilation) to confirm the diagnosis of PE. Spiral CT could demonstrate embolus above lobar artery level in 11 patients, and up to segmental artery level in 5 patients. Conclusion: This study demonstrated that spiral CT could allow accurate demonstration of thrombotic clots in centrally localized embolism. Spiral CT could be effective, specific, noninvasive and useful diagnostic screening modality for the diagnosis of pulmonary embolism.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.579-588
• /
• 2016

This study analyzed nonmetallic inclusions in iron swords with a ring pommel excavated in the Ipbuk-dong, Suwon. Scanning electron microscopy with energy dispersive spectroscopy(SEM-EDS) was used to estimate the iron-making temperature, and we compared the oxide with $SiO_2$ to investigate the heat-treatment technology in the production of iron swords with a ring pommel by investigating the artificial insertion of a slag former and the metallurgical structure. From the wustite observed in most of the specimens, it is judged that these swords were produced by heating and forging iron smelted at a low temperature using the solid reduction method. In addition, judging from the partial presence of $P_2O_5$, it is assumed that they were smelted directly with natural ore, not calcined. From the ratios of $CaO/SiO_2$ and $TiO_2/SiO_2$, it is judged that the raw material for iron-making was iron ore and that a calcareous slag former was not artificially inserted. The structure of the blade part on the front end was pure iron. From the high carbon content of the blade part on the ring pommel and the formation of a martensitic structure and pearlite colony, it is judged that they were tempered after carburizing and that the back, handle part, and ring pommel were unintentionally carburized. Judging from the structure of these specimens, it was noted that they were produced by applying artificial partial heat-treatment technology. This study attempted to present a more scientific analysis by using the method of interpretation through component analysis of nonmetallic inclusions appearing in one relic by the ratio of the oxide divided by $SiO_2$. It is judged that reinterpreting the arguments by the results of the existing analysis and research in this way can obtain different interpretations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.217-222
• /
• 2008

The aim of the present study was to evaluate the effect of marination with mixed salt (NaCl, $CaCl_2$, and phosphate) and kiwi juice and of different cooking methods for pork loin-based products in order to establish the basic database for increasing the consumption of pork loin in Korea. Diced chilled pork loin ($2{\times}2{\times}2\;cm$) was marinated in 4 different treatments: no additives (T1), salt mix only (T2), kiwi juice only (T3), and salt mix+kiwi juice (T4). The mixed salt was prepared by the addition of NaCl, $CaCl_2$, and phosphate dissolved in water (10% of pork loin weight) at concentrations of 0.5, 0.5, and 0.3% per pork loin weight, respectively. The amount of kiwi juice was 10% of pork loin weight. After marination for 24 hrs at $4^{\circ}C$, the samples were cooked with different methods including roasting with Kimchi, pan broiling, and simmering. After simmering, pH of pork loin of T1 and T2 was higher than that of T3 and T4 (p<0.05), while that of roasted with Kimchi and pan broiled did not show any difference. Water holding capacity of T4 after pan broiling was higher than that of T1, T2, and T3 (p<0.001) and shear force of T4 was lower than other treatments. Also flavor and acceptability of T4 after pan broiling were scored higher by 11 sensory panelists (p<0.05). From this result, the pork loin-based products marinated with mixed salt and kiwi juice with pan broiling would be preferred by consumers as one of the methods to promote the consumption of pork loin in Korea.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.177-201
• /
• 2011

Myanmar had fallen behind other southeast asian nations since Burmese way to Socialism settled down. However, historically second election in Myanmar hold in 2011 and dramatic changes in areas such as Special Economic Zone announcement, the very huge inflows of foreign direct investment in a year of 2009, the infrastructure building projects, a permit of the right to strike for Labour Organization in Myanmar etc. Particularly, Foreign investments and trade with neighbouring countries are actively growing and also with Korea. But investments of Korea in Myanmar relatively are not diversity, with limited sectors such as mining and sewing manufacturing. In this point of view, this paper is trying to make implications for strategies of entry and investments of Korea in Myanmar by using previous papers related to Myanmar economies, trade and foreign investments with updated statistical data. The implications for Korea is that recently Myanmar economy is in its early stages of development. Although it can occur huge demand of railway, road, communications and constructions related to social infrastructures essentially needed for development of a country, these sectors relatively need huge investments. On the other hands, textile and sewing industry relatively need smaller investments in which investors can utilize low labour cost and a position for export to third countries. But those firms which set up for those purpose in Myanmar might have trouble creating domestic markets in future. Moreover, due to demand which occur in the early stage of growth in Myanmar, trade volume tend to increase and trading is also possible to invest but Myanmar still have lots of problems with infrastructure such as road and logistics and we need to make pre-survey for the costs and benefits of our products Finally, Myanmar government is trying to promote and encourage some of industries such as export-oriented industry, import substitution industry and labour-intensive industry. It can also means they will accumulate capital which can be sources for Myanmar economic growth.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1545-1554
• /
• 2010

Korean government will set up the nationwide food safety system with strict control of hazardous nutrients like sugar, fatty acids and sodium as well as advanced nutrition education system. In addition, almost one hundred percent of school food service rate forced the government to consider more effective ways to upgrade the nutritional status of school meals. The object of our study was to provide the data on content and consumption of sugar in school meal for the nationwide project. For this purpose, we surveyed the sugar content of 842 school meal menus and their intake level for 154 days in 8 schools in Daejeon and Chungcheong Province. Sugar contents, the sum of the quantity of 5 sugars commonly detected in food, were analysed with HPLC-RID (Refractive Index Detector). Sugar intakes were calculated by multiplying the intake of each menu to the sugar content of that menu. The sugar content was highest in the desserts, which include fruit juices, dairy products and fruits. Sugar content of side dish was high in sauces and braised foods. Sugar intake from one dish is high in beverage and dairy product, and one dish meals contribute greatly to sugar intake because of their large amount of meal intake. The average lunch meal intakes of second grade and fifth grade elementary school students were 244 g/meal and 304 g/meal, respectively. The meal intake of middle school student was 401 g/meal. The average sugar intake from one day school lunch was 4.22 g (4.03 g on elementary and 5.31 g on middle school student), which is less than 10% of daily sugar reference value for Koreans. The result of this study provides exact data of sugar intake pattern based on the content of sugar which is matched directly to the meals consumed by the students.