• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.6
• /
• pp.517-522
• /
• 2015

The objective of this study is to report the clinical application of Korean and Western medicine on chronic diarrhea and Clostridium difficile associated diarrhea. Clostridium difficile associated diarrhea is usually triggered by using antibiotics. This patient also took some antibiotics and she started to suffer diarrhea diagnosed as chronic and Clostridium difficile associated diarrhea. She had suffered from diarrhea over 10 times per day. We checked changes of numbers, total volume of defecations and stool form. We treated the patient with acupuncture, moxibustion, herbal medicine and metronidazole. After treatment, diarrhea was stopped and the patient defecated normal form stool. According to this study, acupuncture, moxibustion, herbal medicine and metronidazole was effective for 1 case of stroke patient with chronic and Clostridium difficile associated diarrhea.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.274-278
• /
• 2002

Surface finishing is still indispensable for most rapid prototyping (RP) processes because of the inherent stair-stepped surface and shrinkage of the parts. These problems can be minimized in the $VLM-_ST$ Process, because it uses expandable polystyrene foam sheets, each of which has a thickness of3.9 mm and a linear-interpolated side slope. The use of thick layers, however, limits the process capability of constructing fine details. This study focuses on the design of post-processing tool for fine details of $VLM-_ST$ parts and investigation of thermal characteristics during EPS foam cutting using the post-processing tool. To calculate the heat flux from the tool into the foam sheet, the tool was modeled as a heat source of radiation for finite element analysis. Results of the analysis agreed well with those of the experiment.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.70-75
• /
• 2012

This study is related to the laser weldability of AZ31B magnesium alloy, an all-purpose wrought alloy with good strength and ductility. In general, AZ31B is classified into AZ31B-H24 and AZ31B-O depending on temper designation. Thus, in this study, the laser weldability of AZ31B-H24 and AZ31B-O was investigated and compared. CW Nd:YAG laser was used to produce bead and butt joints. And the effects of welding conditions on the weldability of these joints were examined in detail. As a result of this study, AZ31B-H24 was found to have thinner oxide film and smaller grain size compared with AZ31B-O. Due to such difference, in bead welding, AZ31B-H24 had more wide welding range for full penetration compared with AZ31B-O. Furthermore, it was also confirmed that AZ31B-H24 and AZ31B-O have different welding conditions to obtain stable keyhole in butt welding.

• Journal of Welding and Joining
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2007

Laser Material Processing has been replaced the conventional machining systems - cutting, drilling, welding and surface modification and so on. Especially, LTH(Laser Transformation Hardening) process is one branch of the laser surface modification process. Conventionally, some techniques like a gas carburizing and nitriding as well as induction and torch heating have been used to harden the carbon steels. But these methods not only request post-machining resulted from a deformation but also have complex processing procedures. Besides, LTH process has some merits as : 1. It is easy to control the case depth because of output(laser power) adjustability. 2. It is able to harden the localized and complicated a.ea and minimize a deformation due to a unique property of a localized heat source. 3. An additional cooling medium is not required due to self quenching. 4. A prominent hardening results can be obtained. This study is related to the surface hardening of the rod-shaped carbon steel applied to the lathe based complex processing mechanism, a basic behavior of surface hardening, hardness distribution and structural characteristics in the hardened zone.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.13-21
• /
• 1974

1. In the past, the smoke-pipe type dry kiln being characterized by the low cost of installation and easy operation was only used by the small scale of wood processing enterprisers for drying softwood and finishing air-dried stocks that were belonged to easy drying properties. The smoke-pipe type dry kiln usually was not suitable for drying hardwoods and green woods because of the difficulties of controlling drying conditions. 2. However, the smoke-pipe type dry kiln heated with smokeless coal which was designed and constructed by the authers was demonstrated to maintain higher accuracy of controlling temperature and humidity than the other smillar types of kiln. Also, since it was constructed with home made equipments, it is supposed to offer the opportunity to install the kiln by the small scale of wood processing enterprisers who could not install the dry kiln because of economical and technical difficulties. Thus, it is expected that promoting the spread of installing the dry kiln will realize the rational use of wood.

• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.40-46
• /
• 2007

Effluent ground water overflow in deep and broad ground space building. Temperature of effluent ground water is in $12{\sim}20^{\circ}...$ annually and the quality of that water is as good as well water. Therefore if the flow rate of effluent ground water is sufficient as source of heat pump, that is good heat source and heat sink of heat pump. Effuent ground water contain the thermal energy of surrounding ground. So this is a new application of ground source heat pump. In this study open type and close type heat pump system using effluent ground water was installed and tested for a church building with large and deep ground space. The effluent flow rate of this building is $800{\sim}1000\;ton/day$. The heat pump capacity is 5RT. The heat pump heating COP was $3.85{\sim}4.68$ for the open type and $3.82{\sim}4.69$ for the close type system. The system heating COP including pump power is $3.0{\sim}3.32$ for the open type and $3.32{\sim}3.84$ for close type system. This performance is up to that of BHE type ground source heat pump.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.154-158
• /
• 2009

Subphthalocyanine (SubPc) derivatives with different kind of substitute groups were synthesized successfully from various precursors using conventional and microwave heating sources. The chemical structure of precursor and product was determined by $^{1}H-NMR$ and FT-IR spectrometer. Also, spectroscopic property was measured by UV-Vis spectrometer. Compared to the conventional synthesis, it was found that SubPc derivatives were synthesized for a shorter reaction time with a higher synthetic yield in the microwave synthesis.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.235-239
• /
• 2002

In this study mesh-type PECVD system was suggested to minimize the hydrogen concentration. The main structural difference between the triode system and a conventional system is that, a third electrode, a mesh, is inserted between the powered and the ground electrode. We investigated several conditions to compare with conventional PECVD. The main effect of mesh was to minimize the substrate damage by ion bombardment and to enhance the surface reaction to induce hydrogen desorption. It was also found that hydrogen concentration decreased but deposition rate increased as increasing applied bias. Applied DC-bia s enhanced sputtering process. Intense ion bombardment causes the weakly bonded hydrogen or hydrogen-containing species to leave the growing film and increased adatom mobility. Furthermore, addition of hydrogen gas enhance the surface diffusion of adatom.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.170-179
• /
• 2003

This study was performed that how phonophoresis using ultrasound for piroxicam affects transdermal permeation and anti-inflammative effects. Transdermal permeation study conducted by using hairless mouse had two categories: control group and ultrasound group. Transdermal permeation was observed according to duty cycle and intensity. Anti-inflammatory effects were determined using in Sprague-Dawley rat. The subjects were divided into three groups of six SD rat each 24 hour, 48 hour, 72 hour. The results of this study were as follows: 1. Transdermal permeation of piroxicam was measured according to ultrasound duty cycle. This research demonstrates that ultrasound group retains more transdermal permeation than control group, and that pulsed ultrasound group holds a little more transdermal permeation than continuous ultrasound group. 2. The transdermal permeation of piroxicam is closely related with ultrasound intensity. Effect of each group of transdermal permeation was significant rises in proportion to ultrasound intensity. 3. By observing inflammation of the tissue caused by trauma, phonophoresis group showed more significant of anti-inflammatory effect. The conclusion of phonophoresis was found to improve significantly the transdermal permeation and the anti-inflammatory effect.

• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.212-217
• /
• 2008

This study carried out the safety evaluation of non-refillable butane can for portable gas range equipped with relief valve for prevention of explosion. The can is heated by electric heater at the real using condition and the extreme condition after installing at a portable gas range for checking the operating pressure and the evaluating suitability of releasing flux. And the possibility of fire or explosion was tested when the gas was released from the relief valve at the real condition. As a result of this safety evaluation test, a non-refillable butane can with relief valve prevents the can from exploding by control of internal pressure.