• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.29-37
• /
• 1999

Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room, numerical simulation with standard k-${\epsilon}$ model was carried out. In the present study, the marine engine room is separated to two floors with porus horizontal partition and considered as a closed space with a heat source and forced ventilation ducts. The porosity of horizontal partition is found to be important. For the engine room with 2 supply ports & 2 exhaust ports, the increasing of the porosity of horizontal partition is effective to reduce the recirculation flow zone in the second floor. When the engine room is ventilated with three supply air ports & one exhaust port, the increasing of the porosity of horizontal partition is effective to reduce the recirculating flow zone in the exhaust air area, but there is a possibility of local extreme heating at the lower side of engine near bottom.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.3
• /
• pp.16-22
• /
• 2017

It has become important for unutilized energy to be used for air conditioning of building. Economic evaluation on energy system by using treated sewage water as heat source, which is one of unutilized energy, was performed. The floor area of the subject building and the distance between heat source equipment and sewage treatment plant was assumed $30,000m^2$ and 200m. Absorption chiller-heater system was used for comparing to the energy efficient system, and payback period method was applied to carry out economic evaluation. Although the operating cost of this system is reduced compared to general heat source system, the ratio is not meaningful compared to the initial investment cost increase, and payback period was calculated to be about 36.1 years. However, when calculated based on the 2014 rate of electricity and city gas, it will be greatly reduced to 3.1 years. International commodity prices are constantly changing, and therefore national policy on the spread of unutilized energy should be maintained.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.4
• /
• pp.14-20
• /
• 2017

Refrigerant having high global warming potentials will be phased out due to environmental protection issues. R410A has been widely used in geothermal heat pump. However, it has a little high GWP by 2088 value. One of the recommended substitute for R410A refrigerant is R452B which having a GWP by 698 value. In this paper, the heating and cooling performance of the water-to-water geothermal heat pump unit with R452B was experimentally investigated. The performance of the heat pump adopting R452B was also compared with the system applying R410A. The heating and cooling capacity of R452B heat pump system showed a slightly lower values within 2% comparing with R410A system. However, the R452B system's coefficient of performance was enhanced by 5.2% and 13.7% at heating and cooling mode, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.85-93
• /
• 2005

In order to effective transportation of goods & smooth traffic in west sea area, it is a plan to build Pyeongtaek bridge. Basically ship-handling operators have a mental difficulty and hazardous for navigation under bridge which is constructed across on the fairway. Therefore this study aims to propose the traffic safety assessment of navigation under the bridge by using full mission ship-handling simulator and also investigate the bridge design regulations of certain countries on the fairway.

• Korean Journal of Child Studies
• /
• v.38 no.2
• /
• pp.81-91
• /
• 2017

Objective: The purpose of this study was to identify the longitudinal relationship between child maltreatment and adolescent suicidal ideation. Several studies suggest that child maltreatment is associated with adolescent suicidal ideation. However, these studies have not focused on the duration of child maltreatment. Methods: Participants were 420 adolescents (52.6% male; 47.4% female) involved in the Korea Welfare Panel Study. Data were collected via youth self-report in 2006, 2009, and 2012. A self-report assessment of children and youths' experiences of physical, emotional, or neglect had been surveyed longitudinally. Questionnaires on adolescent suicidal ideation were answered in 2012. A growth mixture model and multiple regression were conducted using Mplus 5.21. Results: The study results showed that 93.5% of the children had experienced no maltreatment; 6.5% had experienced increasing maltreatment longitudinally. The trajectory of increasing maltreatment was positively associated with adolescent suicidal ideation. Conclusion: These results show that children suffering from chronic maltreatment are subject to a high risk of suicide and therefore require continuous supervision and management.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1282-1284
• /
• 1998

ZnO Varistor is an electronic ceramic device for controlling the surge voltage from low level to high. In this study, the puncture mechanism occurring in ZnO varistor is investigated, and the simulation for restraining the puncture by formulating the relation between the applied voltage and the increase of the inside temperature of grain is applied. In order to simulate the cause of the current localization which is the primary factor causing the puncture, the localization phenomenon and the temperature distribution induced by the localized current, the Voronoi network is applied, which can realize the structure of the practical varistor better than the established simple network. Using the current through each grain and the voltage applied to the grain boundary obtained from that simulation, the Joule heating energy is calculated and the phenomenon that the puncture occurs can be analyzed quantitatively by simulating the electric and thermal characteristics according to the externally applied pulsed voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1142-1145
• /
• 2004

ZnO surge arresters continuously endure the operating voltages during the operation course, and in the mean time, which need to withstand occasionally transient voltages of lightning and switching overvoltages. Under these voltages, the ZnO varistors inside arresters would have aging phenomena, one important result of aging phenomena is the increasing of resistive currents of varistors, which leads to the increasing of power losses of varistors. And the operating voltage is continuously applied on the ZnO varistors, there is a degradation phenomenon existing in ZnO varistors. When the degradation reaches a certain degree, then the arrester must stop operation. The degradation is related to the applied voltage ratio, the applied voltage ratio is high, the degradation is quickly. When the power loss is higher than the thermal dispersion ability of house of arrester, then the arrester will thermally breakdown. In this study the thermal stability characteristics of surge arresters for high power wil be discussed on the view point of watt losses and thermal breakdown.

• Journal of ILASS-Korea
• /
• v.8 no.3
• /
• pp.33-40
• /
• 2003

The low-emission and high-performance diesel combustion is an important issue in the combustion research community, In order to understand the detailed diesel flame involving the complex physical processes, it is quite desirable to diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation, flame stabilization and pollutant formation, In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes, In terms of the macroscopic spray combustion characteristics, it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle, With increasing the cylinder pressure, there is a tendency that the of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force, Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.791-796
• /
• 2013

This paper proposes a fuzzy logic gain scheduling method for depth controller of the AUV (Autonomous Underwater Vehicle). Gains of depth controller are calculated by using multi-loop root locus technique. Fuzzy logic based gain scheduling approach is used to modify multi-loop gains as control condition. It is illustrated by simulations that the proposed fuzzy logic gain scheduling method yields smaller rising time and overshoot compared to the fixed-gain controller. Finally, being implemented on real hardwares, all the proposed algorithms are validated with integrations of hardware and software altogether by HILS.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.67.2-67.2
• /
• 2012

경희대학교와 UC Berkeley, Imperial College London은 우주관측을 위한 초소형 인공위성인 TRIO-CINEMA(TRIO-CINEMA) Project를 수행하고 있다. TRIO-CINEMA는 총 3기의 인공위성으로 경희대학교에서 2기의 위성을, UC Berkeley에서 1기의 위성을, Imperial College에서 3개의 자력계를 제작하고 있다. CINEMA는 Cubesat의 3U 규격으로 크기는 $100mm{\times}100mm{\times}340.5mm$이고 무게는 약 3 kg, 소비전력은 약 3 W이며, 지구 주변의 ENA측정을 위한 주 탑재체인 STEIN(SupraThermal Electrons, Ions, and Neutrals)과 자기장 측정을 위한 부 탑재체인 MAGIC(MAGnetometer from Imperial College)이 탑재되어 약 1년간 800 km 태양동주기 궤도에서 임무를 수행할 예정이다. 위성의 발사는 별도의 POD(Picosatellite Orbital Deployer)라는 Adaptor를 사용해 발사체에 탑재되는데, 발사환경에서 위성이 받을 모든 현상에 관하여 NX Nastran을 사용해 계산을 진행하였다. 계산 결과의 검증을 위해 위성의 Structure Model을 가지고 Random Vibration test를 수행해 위성의 고유 진동수를 측정하였다. 또한 위성이 궤도에서 운용 중 다양하게 받게 되는 열원에 따른 위성의 각 부분의 온도변화를 NX TMG program을 사용하여 계산하였다. 계산 결과의 검증을 위해 3월 Thermal Cycle test 및 Thermal Balance test를 수행할 예정이다. UC Berkeley에서 제작한 위성 1기는 제작완료 후 발사를 위해 발사장으로 배송을 완료하였고, 경희대학교에서 제작 중인 CINEMA 위성 2기는 2012년 후반기 러시아에서 Dnepr 로켓을 사용해 발사 예정이다.