• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.61-70
• /
• 2017

In this case, the impression surface of the existing denture was scanned and was inverted three-dimensionally to express the residual ridge form. Implant planning was performed on the superimposed data of the CT with the scanned image of the denture with radiopaque markers attached. At the day of surgery, customized abutments fabricated in accordance with the form of the gingival margin were linked with fixtures and temporary restorations were set. In the process of fabricating the final prosthesis after the osseointegration of implant fixture, the intraoral scan images at abutment level were merged with images of the abutments scanned and stored before implant surgery. By fabricating the final prosthesis with the abutments obtained by merging can increase the marginal fitness of the final prosthesis and simplify the clinical process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.344-355
• /
• 2023

In complete denture fabrication, accurate preliminary impressions are crucial for obtaining an accurate final impression. However, it can be challenging in cases of atypical arch shapes. This case report compares diagnostic casts made with a stock tray and an intraoral scanner (IOS) in a patient with an atypical arch shape. A 58-year-old edentulous male patient with long, narrow, atypical arches was referred to the Oral and Maxillofacial Surgery department for complete denture fabrication. Compared to the diagnostic cast obtained using IOS with adequately captured anatomical parameters, the primary model obtained using a stock tray showed prominent overextended flanges on the labial and buccal sides of the maxillary arch and less prominent overextended flanges in the mandibular arch with pressure spots in the posterior palatal seal area. The custom tray fabricated from such a model required additional adjustment resulting in increased chair time during the final impression procedure.

• Journal of the Korean Society of Costume
• /
• v.52 no.1
• /
• pp.53-67
• /
• 2002

자연을 분석함으로써, 얻어진 기하학적 패턴은 이미 자연의 질서를 포함하고 있는 논리적이고 합리적인 기본형이기 때문에 간결하며 시각적으로 명쾌감을 준다. 이러한 기하학적 패턴은 복식 디자인에 있어서 20 세기 이후 여러 디자이너의 작품을 통해 재구성되어 현대적 이미지를 나타내는 중요한 모티브가 되고 있으며, 다양한 기법과 재료로 형성화하여 도입되고 있다. 이에 본 연구는 복식의 문양, 실루엣, 디테일에 사용되고 있는 기하학적 패턴을 연구함으로써 기하학적 패턴의 새로운 조형가치를 고찰하였다. 먼저 기하학의 용어 정의를 하였고 기하학적 패턴의 유형과 표현 기법을 분석하고 정리하여 현대 패션에 나타난 기하학적 패턴의 조형미와 그것을 바탕으로 패션 이미지를 추론해 보았다. 현대 패션에 나타난 기하학 패턴을 분석해 보면 유형으로는 첫째, 기하하적 문양으로 복식디자인에 있어서 주로 평면적인 형태로 많이 나타나지만, 크기가 다르고 동일한 기하학적 패턴을 조합시킴으로서 평면적인 형태에 공간감을 부여하기도 하며, 같은 기하학적 패턴의 표면이라도 배치구조에 의해 직선 혹은 사선으로 지각되므로 전혀 다른 이미지를 주었다. 또한 현대 패션에 나타난 기하학적 패턴이 종류는 세로 스트라이프, 가로 스트라이프, 격자 문양, 원, 사선 스트라이프, 마름모, 사각형, 삼각형 등의 순서로 많이 나타났다. 둘째, 색채는 단색의 복식에 강한 대비가 이루어지는 색상으로 표현되어 역동감과 유연한 운동감을 나타났다. 셋째, 기하학적 실루엣으로 단순한 라인의 형태를 나타내거나 입체적이고 부조적인 형태로 구성되어 전체적인 실루엣으로 사용되어 강한 조형감각을 보여주는데 원형을 이용한 실루엣이 가장 많았으며 사각형을 이용한 실루엣, 삼각형을 이용한 실루엣 순서로 나타났다. 넷째, 기하학적인 디테일로 복식의 어느 한 부분에 장식적으로 사용되거나 입체적 형태로 부출 되어 부조적인 느낌을 주는데 소매에 가장 많이 나타났으며 앞여밈, 칼라, 밑단, 주머니 순서로 장식되었다. 다섯째, 현대 패션에 표현된 기하학적 패턴의 표현기법으로는 프린팅, 퀼팅, piece기법, 패치워크, 엮기, 꼴라쥬, 아플리케 순서로 많이 나타났다. 위의 분석을 토대로 기하학 패턴을 활용한 디자인에 내재된 조형의지는 다음과 같이 정리되었다. 첫째, 기하학적 패턴이 지닌 단순성과 경직성을 완화하기 위하여 여러 가지 패브릭을 조합시켜 입체적인 표면효과로 시각적인 착시효과를 극대화하였다. 둘째, 표현기법은 입체파적 표현주의의 특성의 하나로 복시에 사용되는 소재의 왜곡으로 설명할 수 있으며, 새롭고 실험적인 소재의 도입으로 인해 의외성과 부조화를 유발시키는 통시에 유희직인 일면도 지니는 일종의 그로테스크를 나타냈다. 이상에서 정립된 조형의지를 바탕으로 현대 패션에 나타란 기하학 패턴은 절제된 단순함과 명확성으로 단순미가 유추되었고 강한 색상대비로 인한 시각적 집중효과로 주목성을 가지며 재현이 가능하므로 반복성이 유추되었다. 그리고 표준영역이 없는 창의적 표현으로 풍부한 독창성을 보여주고 있다. 또한 내재된 패션 이미지를 분석해 보면 정확함과 차가움의 의미를 지닌 이지적 이미지와 우주의 질서를 반영하는 상징적 이미지, 복잡한 자연으로부터 간결한 형태로의 경향성이 이루어낸 인공적 이미지를 느낄 수 있었으며, 미래적 이미지와 전통적 이미지의 상반된 개념의 이미지를 같이 내포하고 있음을 추론할 수 있었다. 이와 같이 현대 패션에 표현된 기하학적 패턴은 복식을 조형예술 분야로 확실히 인식시키고 발전시키는 데 중요한 촉매제 역할을 담당하고 있으며 또한 많은 디자이너들에게 창조적 욕구를 불러일으키고 영감을 주는데 중요한 모티브를 제공하고 있다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.212-220
• /
• 2015

Purpose: Candida albicans can cause mucosal disease in many vulnerable patients. Also they are associated with denture-related stomatitis. Electrolyzed water is generated by electric current passed via water using various metal electrodes and has antimicrobial activity. The aim of this study was to investigate antifungal activity of electrolyzed water on C. albicans biofilm. Materials and Methods: C. albicans was cultured by sabouraud dextrose broth and F-12 nutrient medium in aerobic and 5% $CO_2$ condition to form blastoconidia (yeast) and hyphae type, respectively. For formation of C. albicans biofilm, C. albicans was cultivated on rough surface 6-well plate by using F-12 nutrient medium in $CO_2$ incubator for 48 hr. After electrolyzing tap water using various metal electrodes, the blastoconidia and hyphal type of C. albicans were treated with electrolyzed water. C. albicans formed blastoconidia and hyphae type when they were cultured by sabouraud dextrose broth and F-12 nutrient medium, respectively. Results: The electrolyzed water using palladium electrode (EWP) exhibited antifungal effect on blastoconidia of C. albicans. Also, the EWP significantly has antifungal activity against C. albicans biofilm and hyphae. In the electrolyzed water using various metal electrodes, only the EWP have antifungal activity. Conclusion: The EWP may use a gargle solution and a soaking solution for prevention of oral candidiasis and denture-related stomatitis due to antifungal activity.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.826-835
• /
• 2009

This study is to examine the relation between leisure constraints and participation by leisure type of security agents. By using purposive sampling method, this study collected 387 questionnaires in 14 private security service registered in 2009 at the Seoul National Police Agency. Cronbach's $\alpha$ .673. The conclusion are as follow. First, leisure constraints difference in socio-demographic characteristics such as sex, age, education level, income, position, job pattern. Second, in case of hobby and cultural activities, higher time constraints showed lesser frequency of participation, higher structural constraints showed lesser period of participation, higher personal constraints showed lesser intensity of participation. On the other hand, high time constraitns had high intensity of participation. In case of play and entertainment activities, even with high self-conscious constraints, it showed increased frequency and period of participation and high personal constraints showed increased period of participation but in contrast, higher structural constraints showed decreased frequency of participation and period. In case of viewing and appreciative activities, even with high interpersonal constraints, frequency and period of participation increased and higher time constraints also had increased period of participation. On the other hand, higher structural constraints showed decrease in frequency of participation and period.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.49-58
• /
• 2018

In recent years, various studies have been carried out on various types of entrepreneurship and comparative activities according to policy efforts and support such as the activation of a bachelor's degree in the establishment of a university, and attention has been paid to the fact that the participation and the educational effect of the students may be different depending on the type. The purpose of this study is to investigate entrepreneurial motivation, entrepreneurship, and entrepreneurial intention in the case of experiential entrepreneurship class focusing on the theoretical-oriented general entrepreneurship class, And the effect of entrepreneurship on entrepreneurial intention. The data were collected and empirical analysis was conducted to compare the difference between the two groups. The results of this study are as follows: First, out of the motivation factors of entrepreneurs, entrepreneurship education, achievement desire, human network, self - esteem, etc. We can confirm that the motivation of entrepreneurs is recognized more greatly. Second, the entrepreneurship factor was not significantly different from the perception between experiential entrepreneurship lecture and theoretical entrepreneurship learner. Third, experiential entrepreneurship learner perceived more willingness to start business than theoretical entrepreneurship learner. Finally, among the entrepreneurship motivation factors, among the entrepreneurship education, achievement desire and entrepreneurship factor, the risk sensitivity affects the entrepreneurial will. This study suggests that the direction of entrepreneurial education focused on quantitative expansion and the creation of qualitative effects of entrepreneurship education are needed. In the future, it will provide policy implications for revitalizing experiential entrepreneurship education In addition, it can contribute to the diffusion of research on the effect of entrepreneurship education.

• Journal of The Korean Association For Science Education
• /
• v.21 no.2
• /
• pp.385-399
• /
• 2001

In this study, the contexts and values of the movement called 'Science and Citizenship' during the 1930-50s are discussed in relation to the historical development of school science education in Britain and to the current STS movement in school science. A special attention is given to the activities and ideas of a then eminent biologist, Lancelot Hogben(1895-1975) who published a textbook-like science book, called "Science for the Citizen"(1938). From the beginning of the 20th century, there was a growing realization that British education system needed to be changed in order to provide school science teaching to a wider audience with more emphasis on the relevance, industrial and humanistic aspects of science. This was echoed by a lecture series called 'Science and Citizenship' which was reported in the School Science Review, then the only nationwide professional journal for science educators and by a group of professional scientists who had socialist ideas toward society. Hogben was one of the key member of the group and delivered the second lecture of 'Science and Citizenship', titled "Biological Instruction and education for Citizenship". Hogben's main idea, illustrated in this lecture as well as in "Science for the Citizen", was that science education should be a way of teaching citizen for promoting democratic society and to achieve that science need to be taught in more integrated, utilitarian and humanistic manners, for example by showing the usefulness, relevance, historical and democratic aspects of science. In addition, a summary of his own life and activities, the social background and socialist scientists of the time, and comparisons between 'Science and Citizenship' movement and the General Science movement in the UK as well as the progressive science education in the USA, and the STS education movement in 1980s are discussed.

• Journal of Korean Philosophical Society
• /
• v.137
• /
• pp.323-356
• /
• 2016

The present study examines Nietzsche's critique of Schopenhauer with regard to the problem of morality and the basis thereof. Schopenhauer's philosophy that each written life as objectification of the will, had an important impact on the early development of Nietzsche's philosophy. But nevertheless Nietzsche criticized Schopenhauer because he denies life in the value of earthly life. Schopenhauer asserts that life is a painful matter because the blind govern all life, and pushes. But unlike Nietzsche, Schopenhauer buoyed the meaning of life, which increases again with the will to power and carry out. Of course there is some resemblance between Schopenhauer and Nietzsche, namely equiprimordiality as both distance themselves from the traditional philosophy that characterizes the man as a rational being and understands. They both destruct the idea of philosophy as a science, and try together to build another philosophical horizon. But in terms of interpretations of life and morals, they have taken different paths. According to Schopenhauer, our life is ultimately sad and agonizing. To overcome this situation, we must deny the will to live and renounce it absolutely. He believes that the moral can eliminate the displacement of the blind will to live and overcome. But in comparison, Nietzsche claims that morality or any moral act is always driven out of resentment. But this resentment is nothing more than a revenge or retribution, which was invented by the weakness. But according to Nietzsche, the feeling of resentment clear will to live. The present paper examines whether Nietzsche's moral critique of Schopenhauer is possible and if so, such a moral critique of Nietzsche can be performed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.483-489
• /
• 2019

With development of digital dentistry, the 3-dimensional (3D) manufacturing industry using computer-aided design and computer-aided manufacturing (CAD/CAM) has grown dramatically in recent years. Denture fabrication using digital method is also increasing due to the recent development of digital technology in dentistry. The 3D manufacturing process can be categorized into 2 types: subtractive manufacturing (SM) and additive manufacturing (AM). SM, such as milling is based on cutting away from a solid block of materal. AM, such as 3D printing, is based on adding the material layer by layer. AM enables the fabrication of complex structures that are difficult to mill. In this case, additive manufacturing method was applied to the fabrication of the resin-based complete denture to a 80 year-old patient. During the follow-up periods, the denture using digital method has provided satisfactory results esthetically and functionally.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.55-62
• /
• 2022

The functionally generated path (FGP) technique, first described by Meyer in 1933, is a method in the oral cavity to use the movement pathway formed by the opposing cusps within the border movement of the mandible. Using this method, an appropriate occlusal shape can be given to the patient. In this case, the FGP technique was selected to provide a bilateral balanced occlusion when restoring the edentulous maxilla that opposes the natural mandibular teeth with irregular arrangement with overdentures. In addition, in order to precisely form the occlusal surface of the posterior region with the FGP technique and to reduce the attrition of denture teeth, zirconia denture teeth, not conventional resin artificial teeth, were individually manufactured. After treatment with these materials and methods, satisfactory results were obtained for both the operator and the patient.