• Journal of Life Science
• /
• v.24 no.8
• /
• pp.910-914
• /
• 2014

For the identification of the Jeju black cattle, Hanwoo and imported beef, we performed a multiplex polymerase chain reaction (PCR) associated with microsatellite (MS) and melanocortin 1 receptor (MC1R) gene. The MC1R gene plays an important role in regulation of the melanin synthesis within mammalian melanocytes. MC1R encoded by extension (E) locus was almost fixed with recessive red e allele in the Hanwoo. We estimated that the specific genotypes ($E^+/E^+$, $E^+/e$) of MC1R gene were characteristic genotypes of Jeju black cattle. But the PCR products resulted from using the MC1R gene derived primers only are not sufficient to identify Jeju black cattle from other relatives. We performed two times of successive multiplex PCR to provide a more accurate result for the identification of Jeju black cattle. The results suggest that two types of successive multiplex PCR methods using MC1R gene and Microsatellite derived primer set will be more useful to identification of Jeju black cattle, Hanwoo and imported beef.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.3
• /
• pp.163-172
• /
• 2013

The aquatic insect collected at six areas (each 2 for mountain area, plain field, and urban area) from 2009 to 2011 were classified to analyze the distribution and diversity of species. Frequency (number of aquatic insect: N), number of species (S), similarity index (C), richness index (R1, R2), variety index (V1, V2), evenness index (E1, E2, E3, E4, E5), and dominance index (D1) were investigated. Total N and S were 143 and 84, respectively. C matrix of 153 combinations was constructed with the average of 0.542. The average C of 3 years (0.659) was 9.9% P, more higher than the average C of 6 areas (0.560). The average values of the index of 18 plots were 2.28, 0.17, 1.24, 1.08, 0.07, 0.06, 0.01, 0.87, 0.31, 0.93 for R1, R2, V1, V2, E1, E2, E3, E4, E5, D1, respectively. The order in the coefficient of variation (CV) of the indicator for 18 plots was N (70.0%) > E3 (54.9%) > E1 (49.6%) > R2 (40.5%) > S (35.3%) > R1 (33.7%) > E2 (28.4%) > E5 (15.9%) > V1 (11.1%) > E4 (6.3%) > V2 (5.1%) > D1 (4.8%). The correlation matrix with 66 combinations between the indexes was constructed with statistical significance for 33 combinations. However, R1, V1, E2 and D1 were the proper indexes to represent species diversity of aquatic insect based on the correlation matrix and the theory of statistical independence. The richness index was highest in mountain, variety index in urban area, and evenness index in plain field. However, the dominance index was lowest in urban area.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.38-45
• /
• 2005

This research was conducted to determine the effect of fertilization programs on crop growth, nutrient uptake and yield of strawberry and salt accumulation in PE film house soil. To achieve these, experiments were conducted through two years with various fertilization program such as traditional fertilization(A), recommended fertilization of Rural development administration (B), Tochigi prefectural experiment station (C) and Nonsan strawberry experiment station (D), and control (E). In 1st year, statistical differences in growth characteristics were not observed among treatments except (E). Yield per 10 was the highest in (D) followed by (A), (B), (C) and (E) and there was the statistical difference between (D) and (E). In the 2nd year experiment, growth characteristics and yield showed similar trends to those of 1st year experiment. In the results of soil analysis of 2nd year, the soil pH of all treatments were in the acceptable range, while electrical conductivity of (A) and (D) were 2.36 and 2.19 %$dS{\cdot}m^{-1}$, respectively. After finishing of strawberry cultivation, nitrate concentration in soil solution of (A) and (D) were 74.6 and 65.0%$mg{\cdot}L^{-1}$ and Na in those were 3.71 and 3.53 $cmol+kg^{-1}$, respectively. Above results indicated that (A) and (D) were good fertilization program for strawberry cultivation, but those also resulted in accumulation of $NO_{3-}N$ and Na in PE house soil.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2003

We have grown D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ (x = 0.5,1.0, 1.5,2.0) magnetic garnet thin films upon $Al_2$O3i and GGG substrate using Pechini process. The annealing temperature to get single phase D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ garnet is dependent on substrate, i.e. the annealing temperature for GGG substrate il 5$0^{\circ}C$ lower than that for $Al_2$ $O_3$ substrate. The grains of garnet thin film grown on GGG (111) plane align along [111] direction, and in this case the hysteresis curve does not saturate up to H : 5000 Oe. We attribute this phenomenon to rotation magnetization process. The maximum amount of Bi substitution in polycrystalline D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ thin film prepared by Pechini process is restricted to 2.0 Bi atom/unit cell, and this value is less than that in single garnet crystall grown by LPE method.own by LPE method.ethod.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.264-274
• /
• 2017

Recently, mobile positioning enhancement has attracted much attention in the 3rd generation partnership project long-term evolution system. In particular, for urban canyon environments, the need for three-dimensional (3D) positioning has increased to enable the altitude of users to be measured. For several decades, several time difference of arrival (TDOA-) based 3D positioning methods have been studied; however, they are only available when at least four evolved Node Bs (eNBs) exist nearby or when all eNBs have the same height. Therefore, in this paper, we propose a new 3D positioning method that estimates the 3D coordinates of a user using three types of two-dimensional (2D) TDOAs. However, the give inaccurate results owing to the undefined axis of the 2D coordinate plane. Therefore, we propose a novel derivation of the hyperbola equation, which includes the undefined axis coordinate in the 2D hyperbola equation. Then, we propose an interaction algorithm that mutually supplies the undefined axis coordinate of users among 2D TDOAs. By performing extensive simulations, we verify that the proposed method is the only solution applicable by using three eNBs with different heights.

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.187-191
• /
• 2000

Sulmonella gyhi is one of important causes of human enteric infections. S @phi I

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.171-173
• /
• 2015

This paper proposes a design method of an authoring tool for making 3D e-book using DirectX development tools. There are several functions such as generation and modification of 3D objects, modification of textures, stereoscopic modes and pictures, video export and so on in the proposed authoring tool. To support these functions, we proposes design scheme such as data structures for generating 3D objects, anaglyph method using color differences and video export method using BandiCap library.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.876-885
• /
• 2018

Although e-sports broadcasting market based on VR(Virtual Reality) is growing in these days, technology development for securing market competitiveness is quite inadequate in Korea. Global companies such as SLIVER and Facebook already developed and are trying to commercialize 360 VR broadcasting technology which is able to broadcast e-sports in 4K 30FPS VR video. However, 2D video is too poor to use for 360 VR video in that it brings less immersive experience and dizziness and has low resolution in the scene. this paper, we not only proposed and implemented virtual camera technology which is able to capture in-game space as 360 video with 4K 3D by 60FPS for e-sports VR broadcasting but also verified feasibleness of obtaining stereo 360 video up to 4K/60FPS by conducting experiment after setting up virtual camera in sample games from game engine and commercial games.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.1
• /
• pp.147-159
• /
• 2013

Hamada ([8]) and Maruta ([17]) proved the minimum length $n_3(6,\;d)=g_3(6,\;d)+1$ for some ternary codes. In this paper we consider such minimum length problem for $q{\geq}4$, and we prove that $n_q(6,\;d)=g_q(6,\;d)+1$ for $d=q^5-q^3-q^2-2q+e$, $1{\leq}e{\leq}q$. Combining this result with Theorem A in [4], we have $n_q(6,\;d)=g-q(6,\;d)+1$ for $q^5-q^3-q^2-2q+1{\leq}d{\leq}q^5-q^3-q^2$ with $q{\geq}4$. Note that $n_q(6,\;d)=g_q(6,\;d)$ for $q^5-q^3-q^2+1{\leq}d{\leq}q^5$ by Theorem 1.2.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1014-1020
• /
• 2012

This paper focuses on the development of a supporting S/W tool that can minimize designer's manual operations and errors in metal mold design based on a 3D solid model. The scope in this work includes the offset surface modeling, the computation of the padding force, the generation of material table, the decision of hole position, the estimation of the size of raw material, which are the essential parts of press die and mold design in automotive industry. The proposed system has been developed as a plug-in type using Pro/E API and Visual C++ in order to put the system into the menu functions of Pro/E which is one major 3D CAD systems in the manufacturing industry.