• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7524-7533
• /
• 2015

The purpose of this study was to investigate the effects of purple sweet potato(PSP) intake and aerobic combined exercise in obese middle school girls. Twenty-four, obese(%body fat > 30%) middle school girls composed of the purple sweet potato intake and aerobic combined exercise group(A, n=6), the aerobic combined exercise group(B, n=6), the purple sweet potato intake group(C, n=6), the control group(D, n=6). The variables of health related fitness, blood lipid profile, insulin resistance were measured in all the subjects before the start and after the end of 12 week aerobic combined exercise program(40~70%HRR, 3 times per week, 70 mins). The test data were analyzed by paired t-test and one way ANOVA, and the alpha level of p<.05 was set for all tests of significance. In the comparison within each group, %body fat[A(p<.01), C(p<.05) groups], TC[A(p<.05), B(p<.01), C(p<.01) groups] and insulin resistance[A(p<.05) group] were significantly decreased and LBM[A(p<.01), B(p<.01) groups], muscular strength[A(p<.01), B(p<.001), C(p<.05) groups], muscular endurance[A(p<.05), B(p<.001) groups], flexibility[A(p<.05), B(p<.01) groups] and cardiorespiratory endurance[A(p<.05), B(p<.001), C(p<.01) groups] were significantly increased. In the comparison between groups, A group was significantly decreased in %body fat, TC and TG than D group(p<.05). A group was significantly increased in muscular strength and cardiorespiratory endurance than C, D groups (p<.05). A group was significantly increased in muscular endurance and HDL-C than D group(p<.05). A, B groups were significantly increased in flexibility than D group(p<.05). A, B, C groups were significantly decreased in insulin resistance than D group(p<.05). In conclusion, purple sweet potato intake and aerobic combined exercise were effective in improving the health related fitness, blood lipid profile and insulin resistance in obese middle school girls.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7978-7989
• /
• 2015

Dyslipidemia is a major risk factor for cardio-cerebrovascular disease. Although the prevalence among Korean adults is very high, its management is known to be poor. The aim of this study was to access the prevalence, awareness, treatment, and control rates of dyslipidemia according to treatment guideline rather than diagnostic criteria. The risk factors for cardio-cerebrovascular disease were evaluated to apply the appropriate risk-based threshold of the lipid treatment targets according to risk category. Analysis was done using nationally representative data (n = 16,263) collected from adults aged 20 years and older participating the Korea National Health and Nutrition Examination Survey (KNHANS) 2010-2012. The age-standardized prevalence rate of dyslipidemia according to treatment criteria was 34.1%. Of these prevalent cases, however, only 19.2% were aware; 9.5% treated; and 8.7% controlled. The age-standardized control rate among treated persons was 47.5%. Men had a significantly higher prevalence than women (39.7% vs. 28.8%), but a significantly lower rate of awareness, treatment, and control (16.0% vs. 22.3%, 7.7% vs. 11.3%, and 6.1% vs. 11.2%, respectively). As the higher risk category, the prevalence rate was higher but the control rate was lower. The prevalence of patients with diabetes was 82.5% when applying the treatment criteria (LDL-cholesterol level of ${\geq}100mg/dL$ and triglyceride level of ${\geq}200mg/dL$). However, only 11.9 % of these were controlled, whose LDL-cholesterol and triglycerides were lower than the treatment goals. Our findings suggest that effective strategies are required to decrease the gap between the prevalence of dyslipidemia and the following treatment. It would be worthwhile to strengthen the follow-up management of patients with dyslipidemia in the National Health Screening Program, especially in the high risk group of cardio-cerebrovascular disease.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5819-5826
• /
• 2011

Recently in the dental world, competition in the medical industry has been intensified due to the prolonged economic stagnation, the quantitative expansion of medical institutions, the enhancement of medical consumers'awareness of rights, and the diversity of medical consumer needs. Dental institution management of the difficulties is the requirement for dental institution to ensure competitiveness. So Word-of-Mouth marketing, which creates high marketing effectiveness with low cost, needs to be actively utilized as a new alternative to mass communication marketing. This research is to accurately grasp the target group of dental medical marketing activities through research on the degree of customer loyalty and Word-of-Mouth effects according to character trait of the patients visiting dental clinics, and to present the basic data for Word-of-Mouth marketing strategies from a viewpoint of practical business through presenting Word-of-Mouth promotion factors. To achieve this, questionnaire survey was conducted on 10 dental clinics located in Daegu for 4 weeks from April 11, 2011 to May 6, 2011 and 612 copies of responses to the questionnaires for final data for analysis were obtained. The results of the analysis are as follows. There were no significant differences in the degree of customer loyalty according to character trait of the subjects between the introverts and the extroverts, and the subjects with high market mavens propensity were found to show high degree of customer loyalty (F=5.243, p=.006). In the differences in Word-of-Mouth effectiveness according to character trait, there were greater differences in Word-of-Mouth experiences in the extrovert subjects ($x^2$=6.738, p=.006) and the subjects with high market mavens propensity ($x^2$=17.251, p=.000). The results of this research clarifies the degree of customer loyalty according to character trait of the patients visiting dental clinics and the differentiated influences of Word-of-Mouth effectiveness, and through this, they will become basic data for presenting ways to establish strategies from the viewpoint of practical business that should be considered in establishing dental medical marketing strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5684-5691
• /
• 2011

The purpose of this study is to examine effects of constraint-induced movement therapy(CIMT) and/or cognitive-perceptual training(CPT) on the change of hand function in cerebrovascular accident(CVA) patients and to evaluate the change in the amount and quality of use of the affected upper extremity in performing daily living tasks. The subjects of study were 10 patients who had been under rehabilitation for more than three months after CVA onset. They were all determined as mild cognition impairment according to NCSE or MVPT test. For CIMT group, to restrict the movement of the unaffected hand the subjects had been worn modified resting arm-splint in daytime for 4 weeks. For CIMT+CPT group, the subjects were performed CPT with CIMT and control group had been under conventional occupational therapy for the same period. CIMT+CPT group showed significant improvement in simulated feeding, lifting large light objects, and lifting large heavy objects of Jebsen-Taylor Hand Function Test. CIMT group also showed significant improvement compared with control group. The mean changes of the amount of use(AOU) of the affected arm had a statistically significant difference among groups (p<.05). While CIMT+CPT group had the biggest change in the quality of movement(QOM) of upper extremity of the affected side, CTL group showed the smallest change. Both CIMT and CIMT+CPT groups had statistically significant difference in the change in the quality of movement in upper extremity of affected side with CTL group(p<.05), but there was not significant difference between CIMT group and CIMT+CPT group. CIMT performed to the patients of stroke, with mild impairment in cognitive perceptual abilities showed the improvement in hand movement and AOU and QOM of upper extremity in the affected side and the combination of CIMT with CPT showed synergic effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.258-270
• /
• 2014

In this paper, we investigate channel capacity of two kinds of uplink OFDMA (Orthogonal Frequency Division Multiple Access) schemes, i.e. ZCZ (Zero Correlation Zone) code time-spread OFDMA and sparse SC-FDMA (Single Carrier Frequency Division Mmultiple Access) robust to access timing offset (TO) among multiple users. In order to reflect the practical condition, we consider not only access TO among multiple users but also peak to average power ratio (PAPR) which is one of hot issues of uplink OFDMA. In the case with access TO among multiple users, the amplified signal of users by power control might affect a severe interference to signals of other users. Meanwhile, amplified signal by considering distance between user and base station might be distorted due to the limit of amplifier and thus the performance might degrade. In order to achieve the maximum channel capacity, we investigate the combinations of transmit power so called ASF (adaptive scaling factor) by numerical simulations. We check that the channel capacity of the case with ASF increases compared to the case with considering only distance i.e. ASF=1. From the simulation results, In the case of high signal to noise ratio (SNR), ZCZ code time-spread OFDMA achieves higher channel capacity compared to sparse block SC-FDMA. On the other hand, in the case of low SNR, the sparse block SC-FDMA achieves better performance compared to ZCZ time-spread OFDMA.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.155-164
• /
• 2018

Many malicious programs have been compressed or encrypted using various commercial packers to prevent reverse engineering, So malicious code analysts must decompress or decrypt them first. The OEP (Original Entry Point) is the address of the first instruction executed after returning the encrypted or compressed executable file back to the original binary state. Several unpackers, including PinDemonium, execute the packed file and keep tracks of the addresses until the OEP appears and find the OEP among the addresses. However, instead of finding exact one OEP, unpackers provide a relatively large set of OEP candidates and sometimes OEP is missing among candidates. In other words, existing unpackers have difficulty in finding the correct OEP. We have developed new tool which provides fewer OEP candidate sets by adding two methods based on the property of the OEP. In this paper, we propose two methods to provide fewer OEP candidate sets by using the property that the function call sequence and parameters are same between packed program and original program. First way is based on a function call. Programs written in the C/C++ language are compiled to translate languages into binary code. Compiler-specific system functions are added to the compiled program. After examining these functions, we have added a method that we suggest to PinDemonium to detect the unpacking work by matching the patterns of system functions that are called in packed programs and unpacked programs. Second way is based on parameters. The parameters include not only the user-entered inputs, but also the system inputs. We have added a method that we suggest to PinDemonium to find the OEP using the system parameters of a particular function in stack memory. OEP detection experiments were performed on sample programs packed by 16 commercial packers. We can reduce the OEP candidate by more than 40% on average compared to PinDemonium except 2 commercial packers which are can not be executed due to the anti-debugging technique.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.263-268
• /
• 2006

Recently, self-etching adhesive system has been introduced to simplify the clinical bonding proce- dures. It is less acidic compared to the phosphoric acid, thus there is doubt whether this system has enough bond strength to enamel. The purpose of this study was to investigate the influence of additional etching on the adhesion of resin composite to enamel. Ninety extracted bovine permanent anterior teeth were used. The labial surfaces of the crown were ground with 600-grit abrasive paper under wet condition. The teeth were randomly divided into six groups of 15 teeth each. Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop and Tyrian $SPE^{TM}$ were used as self-etching primers. Each self-etching primers were applied in both enamel specimens with and without additional etching. For additional etching groups, enamel surface was pretreated with 32% phosphoric acid (UNI-ETCH, Bisco, Inc., Schaumburg, IL. USA). Hybrid resin composite Clearfil AP-X, (Kuraray Co., Ltd., Osaka, Japan) was packed into the mold and light-cured for 40 seconds. Twenty-four hours after storage, the specimens were tested in shear bond strength. The data for each group were subjected to independent t - test at p < 0.01 to make comparisons among the groups. In Clearfil SE $Bond^{\circledR}$, shear bond strength of additional etching group was higher than no additional etching group (p < 0.01). In $Adper^{TM}$ Prompt L-Pop and Tyrian SPE, there were no significant difference between additional etching and non-etching groups (p > 0.01). In conclusion, self-etching adhesive system with weak acid seems to have higher bond strength to enamel with additional etching, while self-etching adhesive system with strong acid seems not.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.