Recently, Nanotechnology becomes a major issue in most part of industries. Nanotechnology is expected to develop various application products due to nano material mired composites is improved physical and electrical properties compared to conventional composites materials. Dielectric and insulation materials need to develop and improve like other field about nanotechnology. In this paper, we reported dielectric dispersion by size(no filler, $1.2{\mu}m$, 500 nm, 10 nm), frequencies(60, 120, 1 kHz), and temperatures($30{\sim}170^{\circ}C$). Dielectric constant of composites materials with filler shows higher than composites materials without filler and increased depending on rising temperatures in low frequency region. It was the effect that nano-filler and impurities in composites contributed to electrical conductivity. And dielectric properties depending on temperatures shows to change in low frequency region dramatically We analyzed interfacial polarization in low frequency region($10^{-2}$ Hz) and oriented polarization in high frequency region($10^{-5{\sim}6}$ Hz) on composites materials.
Molded insulation materials are widely used from large electric power transformer apparatus to small electrical machinery and apparatus. In this study, by adding MgO with the average particle of several tens nm and the excellent thermal conductivity into molding material, we improved the problem of insulation breakdown strength decrease according to rising temperature in overload or in bad environmental condition. We confirmed the life evaluation by using the insulation breakdown and inverse involution to investigate the electrical characteristics of nano-composites materials. By using a scanning electron microscope, it is confirmed that MgO power with the average particle size of several tens nm is distributed and the filler particles is uniformly distributed in the cross section of specimens. And it is confirmed that the insulation breakdown strength of Virgin specimens is rapidly decreased at the high temperature area. But it is confirmed that the insulation breakdown strength of specimens added MgO slow decreased by thermal properties in the high temperature area improved by the contribution of the heat radiation of MgO and the suppression of tree. The results of life prediction using inverse involution, it is confirmed that the life of nano-composites is improved by contribution of MgO according to the predicted insulation breakdown strength after 10 years of specimens added 5.0 wt% of MgO is increased about 2.9 times at RT, and 4.9 times at $100^{\circ}C$ than Virgin specimen, respectively.
The effects of Ca/Sr ratio and the sintering temperature on the properties of $(Ca_xSr_{(1-x)})ZrO_3$ (CSZ) ceramics were investigated in this study. CSZ ceramics were prepared using solid-state reaction process, which were sintered in air at temperatures ranging from $1350^{\circ}C$ to $1450^{\circ}C$. Their structures were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The change in Ca/Sr ratio significantly affected the crystalline phase and the dielectric properties of the $(Ca_xSr_{(1-x)})ZrO_3$ ceramics. The secondary phase, $Ca_{0.15}Zr_{0.85}O_{1.85}$, was observed and increased correspondingly with the rising of sintering temperatures. In order to understand the effects of secondary phase on the dielectric properties of CSZ ceramics, the $Ca_{0.15}Zr_{0.85}O_{1.85}$ phase was prepared individually using solidstate method. The $Ca_{0.15}Zr_{0.85}O_{1.85}$ ceramics sintered at $1500^{\circ}C$ for 2 hours possessed a dielectric constant (${\varepsilon}_r$) of 21.7, a dielectric loss ($tan{\delta}$) of $49.510^{-4}$ and an Insulation Resistance (IR) of $2.1{\times}10^{10}{\Omega}$. The ($Ca_{0.7}Sr_{0.3})ZrO_3$ ceramics exhibited the best dielectric properties, with a permittivity of 29, a dielectric loss ($tan{\delta}$) of $2.7{\times}10^{-4}$, and an Insulation Resistance (IR) of $2.6{\times}10^{12}{\Omega}$.
$Al_2O_3$/TiC/SiC, $Al_2O_3$/SiC 및 $Al_2O_3$/TiC 복합체들을 고온가압소결로 제조하여 이들의 균열저항거동과 기계적 성질을 비교해 보았다. $Al_2O_3$에 $0.8{\mu}m$의 TiC가 30vol% 첨가된 $Al_2O_3$/TiC는 단일체 $Al_2O_3$와 비슷한 균열저항거동을 보이며 파괴인성은 전반적으로 10% 이내의 증가를 보이는데 그쳤지만 강도는 약 30% 증가하였다. $Al_2O_3$에 $3{\mu}m$ SiC가 30vol% 첨가된 $Al_2O_3$/SiC는 SiC 입자의 균열 접속으로 인해 증가하는 균열저항거동을 뚜렷이 보이면서 파괴인성이 긴 균열에서 약 75% 증가하였으나 강도는 다소 감소했다. $Al_2O_3$/TiC에 SiC 입자가 30 vol% 첨가된 $Al_2O_3$/TiC/SiC 복합체의 경우 단일체 $Al_2O_3$에 비해 긴 균열 거리에서 파괴인성이 50% 이상 증가된 6.6 MP${\cdot}\sqrt{m}$에 이르렀으며 강도 값도 약 20% 상승하였다. 그러나 큰 SiC 입자의 첨가로 인해 TiC 입자만 첨가된 $Al_2O_3$/TiC 복합체보다는 강도가 다소 낮았다. 또한 SiC 입자만 첨가된 $Al_2O_3$/SiC 복합체보다는 파괴인성이 다소 낮았는데, 이는 작은 TiC 입자들이 SiC 입계를 거칠게 만들어 균열접속을 일으키는 SiC 입자의 뽑힘 현상을 방해하였기 때문이다.
입자강화 알루미늄 복합재료의 고온거동을 조사하기위하여, 온도 623K~823K에서 $10^{-2}$ ~1.0 S$^{-1}$ 변형속도로 열간 압축 가공 시험을 행하여 복합재의 고온유동응력에 미치는 강화입자의 첨가량, 강화입자의 종류 및 크기와 변형속도 및 변형온도 등의 영향을 조사하였다. 강화입자의 체적분율이 증가함에 따라서 고온유동음력은 증가하였으나 항복점에서의 차이가 변형량이 증가되어도 그대로 유지되고 있었다. 변형속도 민감도(m)로 볼때 SiCp첨가된 복합재가 A1$_2$O$_3$p를 첨가한 복합재보다 비교적 균일하게 가공할 수 있음을 알 수 있었으며, 823K에서 최적변형속도는 0.1Sec$^{-1}$ 이었다. 변형에 필요한 활성화 에너지는 A6061기지금속이 290KJmole$^{-1}$, A6061-20vo1% SiCp = 327KJmo1e$^{-1}$, A6061-20vo1% $Al_2$O$_3$= 531KJmole$^{-1}$이었다. 이것은 알루미늄의 자기활성화에너지 138KJmo1e$^{-1}$보다 큰 값으로 A1$_2$O$_3$강화복합재료가 SiCp 강화 복합재료보다 열간가공이 어렵다는 것을 나타내는 것이다.
환경오염과 인체의 유해성 및 지구온난화로 인하여 자동차의 파워트레인의 변화가 심화되고 있으며 전기자동차의 시장점유율이 상승하고 있다. 또한, 화석연료를 기반으로 하는 내연기관 자동차의 엄격한 배기가스규제를 충족시키기 위해 자동차와 선박용 후처리장치의 비중이 점차로 증가하고 있다. 이 연구의 목적은 CNG 버스에서 배출되는 유독성 가스를 저감하는 NGOC의 $CH_4$와 NOx 저감 능력 향상을 위하여 조촉매 $CeO_2$ 담지량에 영향을 파악하는 것이다. 3종의 천연가스산화촉매(NGOC)를 Fresh 조건과 $700^{\circ}C$ 12hr 열적 열화 조건으로 촉매를 제조한 후 유해가스 저감 성능을 평가하였다. $CeO_2$는 일반적으로 산화 환원반응성이 좋아 촉매활성에 좋다고 알려져 왔으며, 안정적인 물질인 $CH_4$와 NOx 저감 능력에 미치는 영향을 연구하는 것은 의의가 있다. 6wt% $CeO_2$가 담지된 Fresh $1Pt-3Pd-1Rh-3MgO-6CeO_2/(Al+Z)$ NGOC는 $CH_4$에 대한 선택도가 큰 Pd의 분산도가 제일 높았고 유해가스 저감 성능도 향상되었다. $700^{\circ}C$ 12hr 고온조건에서 내구성이 낮은 지지체 zeolite의 화합물 결정이 일부 파괴되면서 zeolite의 결정체인 $Al_2O_3$가 떨어져 나와 응집되었다. 6wt% $CeO_2$가 담지된 NGOC는 귀금속의 분산도 저하가 가장 작았고, $CeO_2$의 열적인 내구성으로 인하여 유해가스 저감 성능이 가장 높았다.
국내에서 상업용으로 이용하는 여러종류의 고분자 필름들에 대한 투습도를 일정한 압력과 상대습도 하에서 측정하고 투습도의 역수를 구하여 각 필름의 방습도로 정의하였다. 실험온도 $40{\pm}1^{\circ}C$, 상대습도 $90{\pm}2%$ 하에서 시료를 24시간 방치한 후 컵방법으로 필름의 방습도를 측정한 결과 다음과 같은 순서로 감소함을 밝혔다. 연신 polypropylene (O. PP) > 고밀도 polyethylene (HDPE, Inflation) > 고밀도 polyethylene (HDPE, T-die) > 무연신 polypeopylene (C. PP) > 무연신 polyester (N. PET) > 저밀도 polyethylene (LDPE) > 연신 polyester (O.PET) > 경질 polyvinyl chloride (Rigid PVC) > 반경질 polyvinyl chloride (Semirigid PVC) > 연질 Polyvinyl chloride (Nonrigid PVC) > 연신 nylon(O.Nylon) > 무연신 nylon (N.Nylon) 또한 온도증가에 따라서 측정한 결과 방습도는 HDPE, (T-die) > C. PP > O. PET > LDPE > O. Nylon으로 감소하였고, LDPE, HDPE (T-die), C. PP, O. PET, O. Nylon 필름들의 투습활성화 에너지는 12.0, 11.1, 11.4, 11.7, 14.1 kcal/mole임을 밝혔다. 필름의 투습도는 극성증가에 따라서 증가하고 PVC 필름은 가소제 첨가에 따라서 증가하며, 필름 두께와 연신 증가에 따라서는 감소하였다. O. PP/LDPE, N.Nylon/LDPE, C.PP/LDPE이 집합필름은 단일필름보다 두께에 대한 의존성이 증가하였다.
본 논문에서는 첨단 ICT기술을 활용하여 온라인 소비자를 오프라인의 전통시장과 연결해주는 O2O 플랫폼 서비스를 기반으로한 모바일 어플리케이션의 디자인을 연구하였다. 소비자가 직접 시장에 방문하여 면대면 (Face-to-face)으로 접촉하는 기존 판매 방식에 더하여 모바일 결제와 개인화 추천서비스 등 첨단 기술을 이용하여 전통시장 소비자의 저변을 확대하고 판매방식 다변화를 통한 이익창출에 기여할 수 있는 방안을 모색한다. 특히, 한국 사용자뿐만 아니라 한국 문화와 상품에 익숙하지 않은 외국인을 위한 다국어를 통한 상품정보 제공기능과 모바일 결제, 저전력 블루투스 비콘(Beacon)을 이용한 근거리 상점 추천 등을 포함한 전통시장 소비자의 편의를 높일 수 있는 방안을 제안하였다. 본 연구에서 제안하는 전통시장 모바일 어플리케이션은 안드로이드 운영체제에 종속된 네이티브 어플리케이션으로 객체지향 프로그래밍 언어인 자바를 통해 개발하였고 이를 위해 객체지향 분석 설계 방식을 이용하였다. 연구의 결론으로는 현재 각광받고 있는 O2O 서비스를 중심으로 새로운 전자상거래 모델을 디자인하였으며, 이를 통해 전통시장의 저변 확대를 도모할 수 있는 방안을 또한 함께 제안하였다.
반도체 칩의 집적도가 급격히 향상됨에 따라 칩의 I/O 수가 증ㅇ가하여 패키지의 크기가 커질 뿐 아니라 칩 자체의 가격보다 패키지의 가격이 높아지고 있는 실정이다. 따라서 집적도의 증가에 의한 I/O 수으이 증가를 억제할 수있는 방법이 요구되고 있다. 본 논문에서는 CTR(Constant-Transition-Rate) 코드 심벌 펄스의 상승 예지와 하강 예지의 위치에 따라 각각 2비트 씩의 디지털 데이터를 엔코딩함으로써 I/O 핀 수를 50% 감소 시킬 수 있는 I/O 인터페이스 회로를 제안한다. 제안한 CTR 코드의 한 심벌은 4비트 데이터를 포함하고 있어 기존의 인터페이스 회로와 비교하여 심벌 속도가 절반으로 감소되고, 엔코딩 신호의 단위 시간당 천이 수가 일정하며, 천이 위치가 넓게 분산되어 동시 스위칭 잡음(Simultaneous Switehing Noise, SSN)이 작아진다. 채널 엔코더는 논리 회로만으로 구현하고, 채널 디코더는 오버샘플링(oversampling) 기법을 이용하여 신호를 복원하는 입출력 회로를 설계하였다. 설계한 회로는 0.6${\mu}m$ CMOS SPICE 파라미터를 이용하여 시뮬레이션함으로써 동작을 검증하였으며, 동작 속도는 200 Mbps/pin 이상이 됨을 확인 하였다. 제안한 방식을 Altera사의 FPGA를 이용하여 구성하였으며, 구성한 회로는 핀 당 22.5 Mbps로 데이터를 전송함을 실험적으로 검증하였다.
$^{131}I$-labeled-O-iodohippurate renograms in 15 cases of epidemic hemorrhagic fever(E.H. fever)during oliguric, diuretic and convalescent phase were analysed quantitatively and qualitatively, namely by its configuration, Tmax T 1/2 and renal index of Hirakawa. The results were as following: 1) Changes on the renograms in E.H. fever showed simultaneous bilateral renal impairment. 2) The characteristic configurations of renogram in the oliguric phase were: (1) Moderately decreased absolute amplitude of initial spike. (2) Continous rising second slope. (3) No appearance of terminal descent. Those were mast likely to those of renograms in acute ureteral obstruction or acute dehydration state. 3) During the diuretic phase, the renogram showed the point of maximal amplitude, but the steepness of 2nd slope was markedly decreased. The appearance of terminal descents was observed with unusually high amplitude despite of the tremendously large amount of urinary output during this phase. 4) In convalescence, the renograms were essentially normal in configuration, but the renal index of Hirakawa was not recovered until this phase. 5) Renograms in E.H. fever showed the characteristic patterns in each phase of its clinical course. 6) $^{131}I$-OIH-Renogram might be an useful method for the evaluation of renal function in E.H. fever during its course.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.