• 보존과학연구
• /
• s.22
• /
• pp.5-25
• /
• 2001

The germicidal and insecticidal properties of volatile components extracted from star anise(Illicium verum Hooker filius) and clove (Eugenia caryophyllata THUNBERG)were evaluated against five microorganisms and three insects for the purpose of developing biocidal active substances from medicinal plants. The volatile components of star anise and clove showed strong antimicrobial effect against Aspergillus niger, Penicillium funiculosum, Mucor hiemalis, Trichoderma viride, and Aureobasidium pullulans. The extracts of each medicine also showed insecticidal effects against Sitophilusoryzae L., Lyctus linearis GOZE, and Reticulitermes spertus kyushuensis Morimoto. Fumigant toxicities to adult insects were determined. In the case of fumiganttoxicity, the extract of star anise showed 100% mortality against R. spertus, S.oryzae, and L. linearis at rates of $2.5\mu\ell$, $50\mu\ell$, $250\mu\ell$/filter paper, respectively but showed no killing effects by clove. The volatile components of star anise and clove were investigated by means of GC/MS. The main constitute, anethole among 20components from star anise and eugenol among 9 components from clove were identified. The mixture of star anise and clove as the volume ratio of 2 : 1 showed higher properties for antimicrobial and insecticidal effect than each volatile component. A. niger was inhibited by the mixture(125ml/$m^3$) for up to 10 days of exposure. Also, from the result of observing state change of organic materials by volatile extracts of star anise and clove, volatile extracts effects have no effect on natural organic materials of organic cultural properties and can be used as biological control agent. As research contents as above, the insecticidal and germicidal agents from star anise and clove and the mixture of them were more efficient and high level to prevent biological damage for conservation of organic cultural properties. So they may be used in new development of biologicalinsecticidal and germicidal agents for conservation of cultural properties.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.61-64
• /
• 2000

We fabricated and characterized Low Noise Amplifier (LNA) using MCM-C (Multi-Chip-Module-Cofired) technology for 2.14 GHz IMT-2000 mobile terminal application. First, We designed LNA circuits and simulated it's high frequency characteristics using circuits simulator. For the simulation, we adopted high frequency libraries of all the devices used in LNA samples. By the simulation, Gain was 17 dB and Noise Figure was 1.4 dB. We used multilayer process of LTCC (Low Temperature Co-fired Ceramics) substrate and conductor, resistor pattern for the MCM-C LNA fabrication. We made 2 buried inductors, 2 buried capacitors and 3 buried resistors. The number of the total layers was 6. On the top layer, we patterned microstrip line and pads for the SMT device. We measured the high frequency characteristics, and the results were 14.7 dB Gain and 1.5 dB Noise Figure.

• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.106-112
• /
• 2019

Flexible impact force sensors composed of piezoelectric PZT/PDMS composite sandwiched between Al/PET films were fabricated and their voltage signal characteristics were evaluated under varying impact forces for electronic mitt applications. The piezoelectric impact force sensor on an ethylene-vinyl acetate (EVA) substrate exhibited an output voltage difference of no greater than 40 mV a periodical impact test in with the impact load was increased by as much as 240 N by a restoration time of 5 s in a five-time experiment, implying good sensing ability. Moreover, the impact force sensor embedded four electronic mitts showed a reliable sensitivity of less than 1 mV/N and good repeatability under 100 N-impact force during a cycle test executed 10,000 times. This indicated that the fabricated flexible piezoelectric impact sensor could be used in electronic mitt applications. However, the relatively low elastic limit of substrate material such as EVA or poly-urethane slightly deteriorated the sensitivity of the impact sensor embedded electronic mitt at over 200 N-impact forces.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.59-66
• /
• 2002

This study was proposed as an exploratory study for understanding the biological bases and structures of three personality models: Eysenck's PEN model, Gray's BIS/BAS model, and Costa & McCrae's Five Factor Model, which was chosen as the major descriptive model regardless of its biological bases. Besides, Eysenck's impulsivity scale, IVE, was added to demonstrate the relationship of P and impulsivity. Concerning personality, most previous reports have explored the relationships between P300 and the introversion-extraversion of Eysenck's theory because of its putative biological bases. In the present study, forty-eight undergraduate took four personality batteries (ERQ-R, NEO-Pl-R, BIS/BAS, and IVE). Two types of oddball tasks including different stimulus duration were used to induce ERPs (50ms for task 1, 300ms for task 2). Distributional topographies of correlation coefficients with personality traits and ERP components were drawn, and considered for the consistent interpretation of the personality model structures. Even though all equivalences for extraversion of personality batteries showed similarities for their intra-correlation, their correlations with P3 amplitudes were dissociate. Eysenck's E might not be the proper psychometric measure for elucidating its biological bases. The present study supported the negative relationship of P3 amplitude and extraversion, which is the consensus of previous studies. Neuroticism and Psychoticism showed correlations with the earlier sensory processing components such as N1 and P2. This result might explain the reason why most of studies have failed to find biological connections relating them. Interaction between gender and personality traits should be considered for the interpretation of correlations. Two types of auditory stimulus duration had different sensitivity to personality traits.

• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.59-63
• /
• 2012

The spacer grid is one of the main structural components in a fuel assembly. It supports fuel rods, guides cooling water and maintains geometry from external impact load and cyclic stress by the vibration of nuclear fuel rod, it is necessary to have sufficient strength against dynamic external load and fatigue strength. In this study, the mechanical properties and fatigue characteristics of laser beam welded zircaloy thin sheet are examined. The material used in this study is a zirconium alloy with 0.66 mm of thickness. The fatigue strength under cyclic load was evaluated at stress ratio R=0.1. S-N curves are presented with statistical testing method recommend by JSME- S002 and compared with S-N curves at R.T. and $315^{\circ}C$. As a result of the experimental approach, the design guide of fatigue strength is proposed and the results obtained from this study are expected to be useful data for spacer gird design.

• Natural Product Sciences
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2005

Leucas aspera Link. (Lamiaceae) is an important medicinal plant in indigenous systems of medicine in India and commonly known as 'Thumbai'. It has various ethnomedicinal values as various traditional communities find diverse medicinal properties. It is used as antipyretic, stimulant, expectorant and diaphoretic drug. The present communication deals with the detailed pharmacognostical evaluation of whole plant of L. aspera collected from five different geographical zones of the country-Uttar Pradesh, Orissa, Karnataka, West Bengal and Gujarat. The botanical characters and TLC fingerprint profile of all the samples were quite similar but some variations were observed in physicochemical parameters. However, some microscopical characters and TLC profile can be used as diagnostic characters for identification of L. aspera, for example amphistomachic leaves and two types of trichomes-abundant, non glandular, uniseriate, 1-3 celled and few glandular, 2-5 celled stalk with rounded tip. Presence of some components at $R_fs-0.56$, 0.65 and 0.76 under UV 366 and at $R_fs-0.31$, 0.43, 0.60, 0.76 and 0.82 under visible light after derivetization in TLC profile may also be used as diagnostic character.

• Structural Engineering and Mechanics
• /
• v.17 no.6
• /
• pp.789-817
• /
• 2004

This paper deals with the modal analysis of rotational shell structures by means of the numerical solution technique known as the Generalized Differential Quadrature (G. D. Q.) method. The treatment is conducted within the Reissner first order shear deformation theory (F. S. D. T.) for linearly elastic isotropic shells. Starting from a non-linear formulation, the compatibility equations via Principle of Virtual Works are obtained, for the general shell structure, given the internal equilibrium equations in terms of stress resultants and couples. These equations are subsequently linearized and specialized for the rotational geometry, expanding all problem variables in a partial Fourier series, with respect to the longitudinal coordinate. The procedure leads to the fundamental system of dynamic equilibrium equations in terms of the reference surface kinematic harmonic components. Finally, a one-dimensional problem, by means of a set of five ordinary differential equations, in which the only spatial coordinate appearing is the one along meridians, is obtained. This can be conveniently solved using an appropriate G. D. Q. method in meridional direction, yielding accurate results with an extremely low computational cost and not using the so-called "delta-point" technique.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1805-1815
• /
• 2019

While nickel-based alloys have been widely used for power plants due to corrosion resistance and good mechanical properties, during the last couple of decades, failures of nuclear components increased gradually. One of main degradation mechanisms was primary water stress corrosion cracking at dissimilar metal welds of piping and reactor head penetrations. In this context, precise estimation of welding effects became an important issue for ensuring reliability of them. The present study deals with a series of finite element analyses and crack growth rate evaluation of Alloys 690/152. Firstly, variation of residual stresses and equivalent plastic strains was simulated taking into account welding of a cylindrical block. Subsequently, extraction and pre-cracking of compact tension (CT) specimens were considered from different locations of the block. Finally, crack growth curves of the alloys and heat affected zone were developed based on analyses results combined with experimental data in references. Characteristics of crack growth behaviors were also discussed in relation to mechanical and fracture parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.4
• /
• pp.494-502
• /
• 2003

The near-tip field of mode-I dynamic cracks steadily propagating in a strain softening material is investigated under plane strain conditions. The material is assumed to be incompressible and its deformation obeys the $J_2$ flow theory of plasticity. A power-law stress-strain relation with strain softening is adopted to account for the damage behavior of materials near the dynamic crack tip. By assuming that the stresses and strain have the same singularity at the crack tip. this paper obtains a fully continuous dynamic crack-tip field in the damage region. Results show that the stress and strain components the same logarithmic singularity of (In(R/r))$\delta$, and the angular variations of filed quantities are identical to those corresponding to the dynamic cracks in the elastic-perfectly plastic material.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.3
• /
• pp.155-166
• /
• 2007

In this paper, captured face-image was pre-processing, segmentation, and extracting features from thinning by differential operator and minute-delineation. A straight line in slope-intercept form was transformed at the $r-\theta$ domain using Hough Transform, instead of Housdorff distance are extract feature as length, rotation, displacement of lines from thinning line components by differentiation. This research proposed a new approach compare with Hough Transformation and Housdorff Distance for face recognition so that Hough transform is simple and fast processing of face recognition than processing by Housdorff Distance. Rcognition accuracy rate is that Housdorff method is higher than Hough transformation's method.