• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2012

We propose a novel technique that records the horizontal-parallax-only (HPO) hologram of a real object using optical scanning holography (OSH). The proposing HPO-OSH is composed of a conventional OSH and an electronics low pass filter. When we scan an object along vertical direction before horizontal direction, the electronic low pass filter filters the vertical fringes with preserving horizontal fringes and gives an HPO hologram. To the best of our knowledge, this is the first time to record the HPO hologram using OSH without either truncation of the scanning beam or digital post processing.

• Transactions of Materials Processing
• /
• v.9 no.1
• /
• pp.80-87
• /
• 2000

The static softening behavior of SCM 440 could be characterized by the hot torsion test in the temperature ranges of 90$0^{\circ}C$~110$0^{\circ}C$and strain rate ranges of 0.05/sec~5/sec. Interrupted deformation was performed with 2 pass deformation in the pass strain ranges of 0.25$\varepsilon$p~3$\varepsilon$p and interrupted time ranges of 0.5~100sec. The dependences of process variables, pass strain ($\varepsilon$i), stain rate ($\varepsilon$), temperature (T) and interpass time (ti), on static recrystallization (SRX) and metadynamic recrystallization (MDRX)were individually predicted from the modified Avrami's equations, The dependence of pass strain on MDRX was neglectable. Comparison of the softening kinetics between MDRX and SRX showed that the rate of MDRX was more rapid than that of SRX for the same deformation variables. Controlled multipass deformations were performed using static and metadynamic recrystallization of SCM 440.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.217-218
• /
• 2006

We propose a method for improving the performance of the Amplitude Shift Keying (ASK) system using a fuzzy logic system for automatically tuning the bandwidth of low pass filter. Instead of a fixed bandwidth of a low pass filter of receiver, the fuzzy logic system is used to automatically adjust the bandwidth. The inputs to the fuzzy logic system are the error and change of error, and output is a bandwidth. Simulation results showed that the proposed system improves considerably on the performance of the fixed bandwidth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.180-184
• /
• 2010

In this paper, the filter design and simulation are performed to construct the multi-channel cardiac activation main amplifier. The main amplifier consists of sample and holder, variable high pass filter, notch filter, variable low pass filter. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution and the filter is designed for 128 channels cardiac activation main amplifier.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.207-210
• /
• 2000

This paper introduces a voltage-mode biquadratic circuit using only Operational Amplifiers (OTAs) and Operational Transconductance Amplifiers (OTAs). The proposed circuit can realize low-pass, band-pass, high-pass, band-stop and all-pass transfer functions by suitably choosing the input and output terminals. And the circuit characteristics can be electronically tuned through adjusting the transconductance gains of OTAs. Some examples are given together with simulated results by PSpice. The circuit configuration is very suitable for implementation in both bipolar and CMOS technologies.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.368-374
• /
• 2002

In this paper, we introduce a procedure to obtain a equivalent circuit of comb-line band pass filter. By employing equivalent circuits of each asymmetrical coupled line. we composed the full equivalent circuit of comb-line bandpass filter and derived simple design equations for extracting each line's impedance. To show the validity of design equations, we simulated and fabricated a planar type comb-line bandpass filter, which has center frequency 1.8㎓, band-width 50㎒ and four resonators. The resulting filter is very compact, have broad stop band with the second pass band centered at four times the center frequency of the first pass band. The experimental results show exact performances of design specification.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2007

A tunable band-pass filter of fiber Bragg gratings incorporating the Sagnac loop interferometer configuration is presented. The proposed band-pass filter with extinction ratio 20 dB has practical advantages in terms of price and performance in comparison with the conventional band-pass filter using a circulator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2002

A novel microstrip type law-pass filter using thin or thick film resistors is proposed to efficiently eliminate harmonic spurious response in stop-band. The proposed low-pass filter shows the spurious suppression enhancement of 20 dB over a conventional one. The designed low-pass filter could be used as a harmonic rejection filter of a local oscillator for Ku-band satellite payload system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.521-524
• /
• 2005

We propose a method for improving the performance of BASK system using the automatic band width control of low pass filter of receive. Instead of a fixed bandwidth, proposed method is used to the fuzzy logic system. The inputs of fuzzy logic system are remainder and integral of remainder, and the output is bandwidth of low pass filter. The efficacy of the proposed method is verified by means of simulation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.6 no.1
• /
• pp.9-15
• /
• 1980

By the mid 1960's the rate of productivity growth in the manufacturing industries of the United States reached the lowest level ever recorded in the American economy. As a result the cost-offsetting operations that had been a century-long part of cost minimizing became less feasible. U.S. manufacturing firins apparently embarked on a pattern of a cost pass-along management. Accounting for price variation as a function of a shift from cost minimizing to cost pass-along is the main subject of this investigation. An econometric model of the inflation process is presented which indicates a clear shift in the modal behavior of manufacturing industries from cost minimizing (1948-1964) to cost pass-along (1965-1975). The latter behavior, initially triggered by the drag of resource diversion on the productivity growth process, undermines the pressure toward productive efficiency that is at the core of industrial engineering, and at the center of U.S. industry's ability to remain competitive.