• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.317-320
• /
• 2005

We report experimental and simulation results of L0 state using inner retarder film compared with normal retardation film. In short wavelength range, the reflectance of inner retardation film is three times compared with that of normal retardation film. This results in blue color of L0 state, as retardation decreases or polar angle increases, the color shifts toward purple, finally yellow color, as expected in the simulation results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.38-38
• /
• 1997

In the paper, we investigate the magneto-impedance(MI) effect of the Fe-Co-B Amorphous magnetic film, the amorphous magnetic film having near zero magnetostostriction is fabricated by using the sputtering methode, and then annealed in magnetic field. When the external magnetic field is directly applied to the fabricated film, the voltage amplitude between both side of the magnetic film varies about 22% at 10[MHz] and the impedance varies about 21% at 10[Oe]. Thus, we find that the fabricated magnetic film has the characteristics of high-quality sensor element.

• Journal of information and communication convergence engineering
• /
• v.4 no.3
• /
• pp.111-113
• /
• 2006

A new thin film deposition technique of piezoelectric ZnO film and its successful application for film bulk: acoustic resonator (FBAR) devices are presented. The two-step deposition used seems to be able to deposit ZnO film with a highly preferred orientation. The FBAR devices with the ZnO films show an excellent return loss of $35{\sim}50$ dB at $1.5{\sim}2$ GHz.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.693-698
• /
• 1998

The effects of $AI_{2}$$O_{3}$ and the ratio of $Na_2O/B_2O_3$ on the phase separation and optical properties of sodium borosilicate glass film fabricated by AFD(Aerosol Flame Deposition) were investigated. When AI,O, of 6wt% was added to $66SiO_2-27B_2O_3-7Na_2O$ the clear glass film without any crystallization was produced under air-quenching condition after consolidation. As the amount of $AI_{2}$$O_{3}$ increased from 1.5 to 6.0 wt% the refractive index linearly increased from 1.4610 to 1.4701, and the difference of TE and TM mode causing by residual stress in film increased gradually. However, the difference of TE and TM mode to reveal birefringence could be minimized by annealing below the glass transition temperature after consolidation and air quenching. On the other hand. as the ratio of $Na_2O/B_2O_3$ increased the refractive index and birefringence of glass film tended to increase, but the measurement of their values were not available at over the critical ratio of $Na_2O/B_2O_3$, because of the cloudiness due to crystallization. The phase separation was greatly accelerated with increasing the ratio of $Na_2O/B_2O_3$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.53-58
• /
• 2008

Film cooling effectiveness on a flat plate was measured with pressure sensitive paint. The pressure sensitive paint(PSP) changes the intensity of its emissive light with pressure and the characteristic was used in film cooling effectiveness measurement. The film coolants were air and nitrogen, and by comparing the intensity of PSP coated surface with each coolant, the film cooling effectiveness was calculated. Three blowing ratio of 0.5, 1, and 2 were tested with two mainstream turbulence intensities. Results clearly showed the effect of blowing ratio and mainstream turbulence intensity. As the blowing ratio increases, the film cooling effectiveness was decreased near the film cooling holes. However, the film cooling effectiveness far downstream from the injection hole was higher for higher blowing ratio. As the mainstream turbulence intensity increased, the film cooling effectiveness was decreased at far downstream from the injection hole.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.2
• /
• pp.39-44
• /
• 1989

(N-docosyl pyridinium)-TCNQ(1:1) complex was synthesized by reacting N-docosyl pyridinium bromide and LiTCNQ. This complex was investigated and confirmed by elemental analysis. U.V, I.R spectra. A stability to the dispersion solvent, which is acetonitrile, dichloromethane, benzene, chloroform and acetonitrile-benzene (1:1, V/V) of (N-docosyl pyridinium)-TCNQ(1:1) complex was investigated by U. V spectrophotometer and was confirmed stabilized on acetonitrile, benzene and acetonitrile-benzene(1:1'V/V) for 7 hours. Using ultra pure water as subphase for L-B film deposition, the Y-type L-B film of (N-docosyl pyridinium)-TCNQ(1:1) complex was farbricated. The electrical conductivities on a perpendicular direction of the L-B film were measured to be $5{\times}10^{-5}{\sim}5{\times}10^{-14}$S/cm according to the number of layer.

• Carbon letters
• /
• v.11 no.2
• /
• pp.127-130
• /
• 2010

Boron doped fullerene $C_{60}$ ($B:C_{60}$) films were prepared by the thermal evaporation of $C_{60}$ powder using argon plasma treatment. The morphology and structural characteristics of the thin films were investigated by scanning electron microscope (SEM), Fourier transform infra-red spectroscopy (FTIR) and x-ray photo electron spectroscopy (XPS). The electrochemical application of the boron doped fullerene film as a coating layer for silicon anodes in lithium ion batteries was also investigated. Cyclic voltammetry (CV) measurements were applied to the $B:C_{60}$ coated silicon electrodes at a scan rate of $0.05\;mVs^{-1}$. The CV results show that the $B:C_{60}$ coating layer act as a passivation layer with respect to the insertion and extraction of lithium ions into the silicon film electrode.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.687-689
• /
• 1995

Our team works on mixture of hard magnetic materials. As hard magnetic material we used mixture of powders: melt-spun ribbon Nd-Fe-B, ferrite and Alnico. Their different mixtures are basic material for dielectromagnets under our investigation. Main disadvantage of dielectromagnets with Nd-Fe-B alloy powder as a component is a low corrosion resistance. Protection against corrosion is covering dielectromagnets with metallic or organic coating film. The coating film protects dielectromagnets from free particles on the surface and low resistance for mechanical stresses too. The surface of dielectromagnets prepared from mixture of powders if formed by metallic particles - powder of Nd-Fe-B and Alnico, particles of oxide - powder of ferrite and particles of resin - bonding materials. Team work on technology of laying the metallic coating on dielectromagnets prepared from mixture of mentioned powders. Papers show the results of initial investigation on metallic coating technology. It shows influence of type and used technology of the metallic coating film on magnetic properties of dielectromagnets.

• Korean Journal of Microbiology
• /
• v.49 no.3
• /
• pp.286-291
• /
• 2013

Soybean pastes with 8% (w/w) salinity were prepared instead of soybean paste with 14% (w/w) salinity to meet the growing demands of Korean's low sodium diet. After aging, white films had appeared on the surface of all low-salted soybean pastes [8% (w/w) salinity] unlike high-salted soybean pastes [14% (w/w) salinity]. All of eight microbes isolated from the surface film were identified as Pichia kudriavzevii. Eleven Bacillus strains with good characteristics of fermentation were isolated from traditionally fermented soybean pastes in order to preserve their unique flavors and aromas after aging, and as a result of analyzing the biochemical characteristics and 16S rRNA sequences, those were identified as B. subtilis, B. licheniformis, and B. methylotrophicus. All of the Bacillus isolates had antagonistic activities against 8 isolates of the film-forming yeasts and harbored the genes for synthesis of antimicrobial surfactants including lichenysin and/or surfactin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.963-968
• /
• 2000

Magnetic properties and microstructures of Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films were investigated as a function of addition of element Ag, (X$\_$Ag/=0 to 6 at.%) and annealing temperature, T$\_$a/=300$\^{C}$ to 600$\^{C}$. In the case of adding Ag, magnetic properties of Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films were improved than those of Ag-free Fe$\_$93/Zr$_3$B$_4$thin films. The prominent soft magnetic properties with coercivity of 1.1 Oe, saturation magnetization of 2.2 T and permeability of 5400 at 50㎒ were obtained from Fe$\_$88/Zr$_3$B$_4$Ag$\_$5/ thin film annealed was lower than that of Fe-base or Co-base thin films reported previously. Such enhanced magnetic properties are presumably attributed to the format in ultra fine grains. Also, the reduced eddy current loss in the annealed sample is due to refined micro magnetic domains with increasing the amount of Ag in Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films.