• Title/Summary/Keyword: %24P_2O_5%24

Search Result 981, Processing Time 0.031 seconds

The Effect of Cuff Pressure of Endotrachel Tube on Postoperative Sore Throat (기관내관의 기낭압 조정이 수술 후 인후통에 미치는 영향)

  • Na, Hye-Kyoung;Yoon, Hae-Sang
    • Korean Journal of Adult Nursing
    • /
    • v.21 no.5
    • /
    • pp.538-546
    • /
    • 2009
  • Purpose: The purpose of this study was to identify the effects of cuff pressure on postoperative sore throat. Methods: Data were collected from January 4 through May 15, 2008. Among the 60 patients, 30 patients were randomly assigned to the control group and the rest to the experimental group. Initial cuff pressure of both groups was set at 20 $cmH_2O$. The experimental group was maintained at 20 $cmH_2O$ throughout the anesthesia, while the control group was not regulated further. Sore throat was assessed at postoperative 1, 24 and 72 hours. Data were analyzed using Mann-Whitney test and Spearman's rho coefficients. Results: Cuff pressure in control group increased from 20 to 43 $cmH_2O$ within 3 hours after induction. However, the experimental group showed that there was apparently a reduced rate of sore throat at postoperative 24 hours (p = .048), and 72 hours (p = .002) than in the control group. However, no outstanding differences between both groups at postoperative 1 hour (p = .081) were detected. The correlation between cuff pressure and sore throat was statistically significant ($r_s$ = .590, p < .001). Conclusion: We conclude that maintaining cuff pressure at 20 $cmH_2O$ could be an effective means to reduce sore throat in surgical patients with inhalation anesthesia.

  • PDF

The Effect of Residual H2Pressure on Gallium-doped ZnO Films Deposited by Magnetron Sputtering (마그네트론 스퍼터링에 의해 제작한 Gallium-doped ZnO 박막에 있어서 잔류 H2O 분압의 영향)

  • Song, Pung-Keun;Kwon, Young-Jun;Cha, Jae-Min;Lee, Byung-Chul;Ryu, Bong-Ki;Kim, Kwang-Ho
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.10
    • /
    • pp.928-934
    • /
    • 2002
  • Gallium doped Zinc Oxide(GZO) films were deposited by dc magnetron sputtering using a GZO ceramic target at various conditions such as substrate temperature (RT, 400), residual water pressure ($P_{H_2O}$; 1.61${\times}10^{-4}∼2.2{\times}10^{-3}$ Pa), introduction of $H_2$ gas (8.5%) and different magnetic field strengths(250, 1000G). GZO films deposited without substrate heating showed clear degradation in film crystallinity and electrical properties with increasing $P_{H_2O}$. The resistivity increased from 3.0${\times}10^{-3}$ to 3.1${\times}10^{-2}{\Omega}㎝$ and the grain size of the films decreased from 24 to 3 nm when PH2O was increased from 1.61${\times}10^{-4}$ to 2.2${\times}10^{-3}$ Pa. However, degradation in electrical properties with increasing $P_{H_2O}$ was not observed for the films deposited with introduction of 8.5% $H_2$. When magnetic field strength of the cathode increased from 250G to 1000G, crystallinity and electrical properties of GZO films improved remarkably about all the $P_{H_2O}$. This result could be attributed to the decrease in film damage caused by the decrease in plasma impedance.

Effects of Water Temperature and Photoperiod on the Oxygen Consumption Rate of Fasted Juvenile Parrot Fish, Oplegnathus fasciatus (돌돔, Oplegnathus fasciatus 치어의 절식시 산소 소비율에 미치는 수온과 광주기의 영향)

  • Oh, Sung-Yong;Noh, Choong-Hwan;Kang, Rae-Seon;Myoung, Jung-Goo
    • Ocean and Polar Research
    • /
    • v.28 no.4
    • /
    • pp.407-413
    • /
    • 2006
  • The effect of water temperature and photoperiod on the oxygen consumption of the fasted juvenile parrot fish, Oplegnathus fasciatus was investigated to provide empirical data for the early-stage culture management and bioenergetic growth model of the species. The mean body weight of the juvenile used for the experiment was $21.5{\pm}1.9g$, and the oxygen consumption rate was measured under four water temperatures (10, 15, 20 and $25^{\circ}C$) and three photoperiods (24L:0D, 12L:12D and OL:24D) with an interval of 5 minutes for 24 hours using a continuous flow-through respirometer. In each treatment three replicates were set up and 15 juveniles were totally involved. The oxygen consumption rates increased with increasing water temperature under all photoperiod treatments (P<0.001). Mean oxygen consumption rates at 10, 15, 20 and $25^{\circ}C$ ranged $202.1{\sim}403.4,\;306.7{\sim}502.2,\;536.7{\sim}791.0\;and\;879.9{\sim}1,077.4mg\;O_2\;kg^{-1}h^{-1}$, respectively. $Q_{10}$ values ranged $1.58{\sim}2.30$ between 10 and $15^{\circ}C,\;2.44{\sim}3.06$ between 15 and $20^{\circ}C\;and\;1.86{\sim}2.6y9$ between 20 and $25^{\circ}C$, respectively. Mean oxygen consumption rates of O. fasciatus were the highest in continuous light (24L:0D) followed by 12L:12D and 0L:24D (P<0.001). The oxygen consumption of fish exposed to the 12L:12D photoperiod was significantly higher during the light phase than during the dark phase under all temperature treatments (P<0.001). In summary, oxygen consumption rates of the juvenile parrot fish increase with increasing water temperature and lengthening daylight period; and, thereby, changes in water quality resulted from the depletion of oxygen under high temperature and long daylight photoperiod conditions should be monitored.

Dielectric and Piezoelectric Properties of (Na0.5K0.5)0.97NbO3 Ceramics Substituted with CeMnO3 (CeMnO3 치환된 (Na0.5K0.5)0.97NbO3 세라믹스의 유전 및 압전 특성)

  • Oh, Young-Kwang;Yoo, Ju-Hyun;Mah, Suk-Burm;Jeong, Yeong-Ho
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.3
    • /
    • pp.194-199
    • /
    • 2011
  • In this study, non-stoichiometric 1-x$[(K_{0.5}Na_{0.5})_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + x $CeMnO_3$ + 0.8 mol%CuO + 0.2 wt% $Ag_2O$ (x=0, 0.005) ceramics were prepared by a conventional mixed oxide and carbonate method, their dielectric and piezoelectric properties were investigated with the variations of sintering temperature. As $CeMnO_3$ substitution incereased, the density, piezoelectric constant($d_{33}$) and dielectric constant($\varepsilon_r$) were increased and the mechanical quality factor(Qm) was decreased. At the sintering temperature of $1100^{\circ}C$, the density, electromechanical coupling factor($k_p$), dielectric constant($\varepsilon_r$) and piezoelectric constant($d_{33}$) of 0.5mol% $CeMnO_3$ specimen showed the optimun values of 4.475 $g/cm^2$, 0.437, 552 and 166 pC/N, respectively. However, the mechanical quality factor($Q_m$) showed the minimum value of 380.

Studies on AlF3-(Mg+Sr+Ba)F2-P2O5 Glasses II. Effect of MgF2 Contents (AlF3-(Mg+Sr+Ba)F2-P2O5계 유리에 관한 연구 제2보 : MgF2의 영향)

  • 김정은;이종근
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.3
    • /
    • pp.277-281
    • /
    • 1987
  • The various contents of MgF2 from 0 to 12.5wt% are studied in the AlF3-(Mg+Sr+Ba)F2-P2O5 system for the effects of various properties in glasses and the atmosphere of melting was controlled by N2 and Ar gas respectively. Density, refractive index, infrared transmission, thermal conductivity and thermal expansion coefficient of glasses are determined. Density, refractive index and thermal conductivity are decreased, micro-hardness and thermal expansion coefficient are increased according to the increasing of MgF2 contents. Infrared transmittance decreases with increasing the MgF2 contents and it slightly dropped by air than N2 and Ar atmosphere. Other properties are not influenced by atmosphere control.

  • PDF

Class Strengthening by Crystallization with Femto Second Laser Pulse (극초단파레이저를 활용한 결정화에 의한 유리의 강도 증진)

  • Moon P. Y.;Lee K. T.;Yoon D. K.;Ryu B. K.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2005.10a
    • /
    • pp.171-174
    • /
    • 2005
  • To improve the strength of glass is being studied in order to contribute to weight saving of flat panel displays. Generally, the strength achieved of glass-ceramics is higher as is the fracture toughness by the formation of a heterogeneous Phase inside glass. In this study, Ag-doped $45SiO_2-24CaO-24Na_2O-4P_2O_5$ glasses were irradiated to strengthen by crystallization using femto-second laser pulse. UV/VIS, Spectroscope, XRD, nano-indenter and SEM etc. irradiation of laser pulse without heat-treated samples was analyzed. Samples irradiated by laser had higher value$(4.4\~4.56{\ast}10-3Pa)$ of elastic modulus which related with strength of glass than values heat-treated samples and these are $1.2\~1.5$ times higher values than them of mother glass. This process can be applicable to the strengthening of thinner glass plate, and it has an advantage over traditional heat-treatment and ion-exchange method.

  • PDF

The Optimal Conditions for Fibrinolytic Enzyme Production from Streptomyces sp. JK-20 (Streptomyces sp. JK-20유래 혈전용해효소의 생산조건)

  • 정영기;전홍기;김유정
    • Journal of Life Science
    • /
    • v.12 no.1
    • /
    • pp.43-48
    • /
    • 2002
  • An actinomycetes which produces fibrinolytic enzyme was isolated from soil. Characteristics of the isolated strain and the optimal conditions for the productions of fibrinolytic enzyme were summarized as follows; The fibrinolytic enzyme production strain generates gray airmycelium and had about 0.6~0.8$\times$0.4~0.8${\mu}{\textrm}{m}$ cylindrical spore, smooth surface and formed spore chain of 10~40 spores. We have identified this strain as Streptomyces sp. JK-20. This strain was able to grow up at 20~32$^{\circ}C$ and its optimum growth temperature and pH was 24$^{\circ}C$ and pH 6.0, respectively. The optimal conditions for porducing fibrinolytic enzyme; carbon source, nitrogen source, metal ions and phosphorous sources was 1% xylose, 0.5% yeast extract, 0.5% polypepton, 0.1% MgSO$_4$.7$H_2O$ and 0.1% NaH$_2$PO$_4$.2$H_2O$, respectively. This strain showed the highest productivity of fibrinolytic enzyme after the fourth day under such optimal culture conditions.

Studies on AlF3-(Mg+Sr+Ba)F2-P2O5 Glasses I. Glass Forming Ranges of Fluorophosphate System and Its Various Properties (AlF3-(Mg+Sr+Ba)F2-P2O5계 유리에 관한 연구 I. 유리화 범위와 특성)

  • 김정은;이종근
    • Journal of the Korean Ceramic Society
    • /
    • v.24 no.2
    • /
    • pp.117-122
    • /
    • 1987
  • Glass forming ranges in the AlF3-(Mg+Sr+Ba)F2-P2O5 system are studied and ultraviolet transmission, infrared transmission, coefficient of refractive index, thermal expansion coefficient, density and chemical durability of the glasses are determined. Glass forming range is restricted MgF2 0-10wt%, SrF2 10-50wt%, BaF2 10-40wt% in this system. While BaF2 is substituted by SrF2, density and refractive index are decreased, micro hardness and thermal expansion coefficient are increased according to the increasing of SrF2 at fixed MgF2 contents. These samples represent high transmittance(93%) from 400nm to 3800nm and chemical durability of these samples show less than 0.3mg/$\textrm{cm}^2$$.$hy by weightloss.

  • PDF

Determination of 25 EDs in Frog and Fish Tissue by GC-MS (SIM)

  • Shin, Ueon-Sang;Shin, Ho-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • v.24 no.4
    • /
    • pp.413-420
    • /
    • 2003
  • A gas chromatography/mass spectrometric assay method was developed for the simultaneous determination of neutral and bacis twenty-five disruptors $(ED_S)$ in frog and fish. Afther homogenization and sonication of 5 g of sample, purification was achieves in one step with a solid phase extraction procedure using silica gelflorisl. Eluton was performed with 50mL of acetone : n-hexane (1 : 9) solution. The eluate was concentrated to approximately 10uL and dissolves with 100 uL of hexane and analyzed by GC-MS (SIM). The peaks had good chromatographic properties and the extraction of these compounds from sample also gave relatively high recoveries with small variatoins. Detection limits were 0.1 ng/g for 4-nitrotoluene, benzophenone, hexachlorobenzene, atrazine, malathion, o,p-DDT, o,p-DDT and permethrin, and 0.2 ng/g for heptachlor epoxide, γ-chlordane, α-chlordane, p,p'-DDE, p,p'-DDD, cypermethrin and fenvalerate, and 0.3 ng/g for trifluralin, metribuzin, alachlor, dieldrin and p,p'-DDT, and 0.5 ng/g for heptachlor, aldrin and parathion, and 0.7 ng/g for endrin, and 0.8 ng/g for nitrofen. The recoveries were between 33 and 109%. The method was used to analyze twenty-five frogs and forty-six fishes fishes samples caught from various regions in Korea. Benzophenone was detected at concentration of up to 17.2 ng/g in frog or fish. Heptachlor, aldrin, γ-chlordane, p,p'-DDE, p,p'-DDD, endrin and o,p-DDD were detected at concentrations of 0.7-12.5 ng/g in frog or fish. Also significant leveles of dieldrin (up to 22.5 ng/g) were observed. The developed method may be valuable to be used to the national monitoring project of EDS in biota samples.

Application of Photocatalytic Degradation for Efficient Treatment of Organic Matter in Landfill Leachate in Jeju Island (제주도 매립장 침출수 중 유기물의 효율적 처리를 위한 광촉매 분해 반응의 응용)

  • Lee, Chang-Han;Lee, Taek-Kwan;Cho, Eun-Il;Kam, Sang-Kyu
    • Journal of Environmental Science International
    • /
    • v.31 no.8
    • /
    • pp.677-689
    • /
    • 2022
  • In order to photocatalytically treat organic matter (CODCr) and chromaticity effectively, chemical coagulation and sedimentation processes were employed as a pretreatment of the leachate produced from landfill in Jeju Island. This was performed using FeCl3·6H2O as a coagulant. For the treated leachate, UV/TiO2 and UV/TiO2/H2O2 systems were investigated, using 4 types of UV lamps, including an ozone lamp (24 W), TiO2 as a photocatalyst, and/or H2O2 as an initiator or inhibitor for photocatalytic degradation. In the chemical coagulation and sedimentation process using FeCl3·6H2O, optimum removal was achieved with an initial pH of 6, and a coagulant dosage of 2.0 g/L, culminating in the removal of 40% CODCr and 81% chromaticity. For the UV/TiO2 system utilizing an ozone lamp and 3 g/L of TiO2, the optimum condition was obtained at pH 5. However, the treated CODCr and chromaticity did not meet the emission standards (CODCr: 400 mg/L, chromaticity: 200 degrees) in a clean area. However, for a UV/TiO2/H2O2 system using 1.54 g/L of H2O2 in addition to the above optimum UV/TiO2 system, the results were 395 mg/L and 160 degrees, respectively, which were within the emission standard limits. The effect of the UV lamp on the removal of CODCr, and chromaticity of the leachate decreased in the order of ozone (24 W) lamp > 254 nm (24 W) lamp > ozone (14 W) lamp > 254 nm (14 W) lamp. Only CODCr and chromaticity treated with the ozone (24 W) lamp met the emission standards.