• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1629-1637
• /
• 2015

To develop various usable water from coal seam gas (CSG) water that needs to be pumped out from coal seams for methane gas production, a feasibility study was carried out, evaluating and analysing a recent report (Coal Seam Gas Water Management Policy 2012) from Queensland State Government in Australia to suggest potential CSG water treatment options for fit-for-purpose usable water production. As CSG water contains intrinsically high salinity-driven total dissolved solid (TDS), bicarbonate, aliphatic carbon, $Ca^{+2}$, $Mg^{+2}$ and so on, it was found that appropriate treatment technologies are required to reduce the hardness below 60 mg/L as $CaCO_3$ by setting the reduction rates of $Ca^{+2}$, $Mg^{+2}$ and Na+ concentrations, as well as TDS reduction. Also, Along with fiber filtration and membrane separation, an oxidation degradation process was found to be required. Along with salinity reduction, as CSG water contains organic compounds (TOC: 248 mg/L, $C_6-C_9$: <20 mg/L and $C_{10}-C_{36}$: <60 mg/L), compounds with relatively high molecular weights ($C_{10}-C_{36}$) need to be treated first. Therefore, this study suggests a combined system design with filtration (Reverse osmosis) and oxidation reduction (electrolysis) technologies, offering proper operating conditions to produce fit-for-purpose usable water from CSG water.

• Journal of Periodontal and Implant Science
• /
• 제44권5호
• /
• pp.227-234
• /
• 2014

Purpose: Dentin hypersensitivity is a potential threat to oral health. Laser irradiation may provide reliable and reproducible treatment but remains controversial. The present study aimed to evaluate the effects of $CO_2$ or erbium-doped yttrium aluminium garnet (Er:YAG) laser therapy, and to assess mineral content. Methods: Eighteen human single-rooted teeth affected with advanced periodontitis were obtained. Buccal and lingual surfaces were planed to form 36 specimens. Ethylenediaminetetraacetic acid gel (24%) was applied to remove the smear layer and simulate hypersensitive teeth. The experimental groups were: group 1, control (no irradiation); group 2, $CO_2$ laser (repetitive pulsed mode, 2 W, $2.7J/cm^2$); and group 3, Er:YAG laser (slight contact mode, 40 mJ/pulse and 10 Hz). To evaluate dentinal tubule occlusion, six specimens per group (2-mm thickness) were prepared and observed using scanning electron microscopy (SEM) for calculation of the occlusion percentage. To evaluate the mineral content, six specimens per group (0.6-mm thickness) were used, and then the levels of Ca, K, Mg, Na, and P were measured by inductively coupled plasma-atomic emission spectrometry. In addition, the surface temperature of the specimens during laser irradiation was analyzed by a thermograph. Results: The SEM photomicrographs indicated melted areas around exposed dentinal tubules and a significantly greater percentage of tubular occlusion in the $CO_2$ and Er:YAG laser groups than the control, and in the Er:YAG group than the $CO_2$ laser group. In addition, no significant differences were noted among the experimental groups for the mineral elements analyzed. The $CO_2$ laser group showed an evident thermal effect compared to the Er:YAG group. Conclusions: $CO_2$ and Er:YAG laser are effective in treating dentin hypersensitivity and reducing its symptoms. However, the Er:YAG laser has a more significant effect; thus, it may constitute a useful conditioning item. Furthermore, neither $CO_2$ nor Er:YAG lasers affected the compositional structure of the mineral content.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.118-126
• /
• 2021

폐기물로 대량 발생되는 굴껍질을 활용한 vaterite 형 탄산칼슘 제조 실험을 하였다. 굴껍질을 800 ℃의 온도에서 항량이 되도록 가열하여 산화칼슘이 주성분인 소성 굴껍질을 제조하였다. 이 굴껍질을 질산 용액에 녹여 0.1 M 질산칼슘 수용액을 만들고, 0.1 몰 라이신/1 몰 생석회가 첨가된 0.1 M 탄산나트륨 수용액과 20 ℃, 600 rpm 교반 조건에서 1시간동안 반응시켜 탄산칼슘을 제조하였다. XRD, SEM, Size 분석을 하고 vaterite 84.5%, calcite 15.5% 함유한 구형 탄산칼슘을 확인하였다. 평균 입경 범위는 6.87 ㎛ 이었고, 아미노산 분석에서 탄산칼슘 내의 라이신 함유량은 0.1%이었다.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1285-1292
• /
• 2018

Microstructural properties of as-grown and annealed CoCrFeMnNi high entropy alloy (HEA) oxynitride thin films were investigated. The CoCrFeMnNi HEA oxynitride thin film was grown by magnetron sputtering method using an air gas, and annealed under the argon plus air flow for 5 h at $800^{\circ}C$. The as-grown film was homogeneous and uniform composed of nanometer-sized crystalline regions mixed with amorphous-like phase. The crystalline phase in the as-grown film was face centered cubic structure with the lattice constant of 0.4242 nm. Significant microstructural changes were observed after the annealing process. First, it was fully recrystallized and grain growth happened. Second, Ni-rich region was observed in nanometer-scale range. Third, phase change happened and it was determined to be $Fe_3O_4$ spinel structure with the lattice constant of 0.8326 nm. Hardness and Young's modulus of the as-grown film were 4.1 and 150.5 GPa, while those were 9.4 and 156.4 GPa for the annealed film, respectively.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.358-364
• /
• 2008

Wood-inorganic material composite (WIC) was prepared by impregnating wood with copper sulfate ($CuSO_4\;5H_2O$) solution and by immersed wood in sodium carbonate($Na_2CO_3$) solution in order to introduce insoluble copper compounds {copper carbonate hydroxide, $CuCO_3\;Cu(OH)_2$} into the wood to give fungicidal effects in treated-wood. The weight percent gains (WPGs) of treated wood reached maximum value by impregnation of 20% copper sulfate solution and immersion in about 15% sodium carbonate solution for 24 hrs. Inorganic substances were present mainly in the lumina and cross-field pitting of tracheides. These substances were proved to be the insoluble copper carbonate hydroxide against water by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDXA). The treated specimens showed high preservative effectiveness because the weight losses were hardly occurred by the fungi degradation test.

• 콘크리트학회논문집
• /
• 제24권2호
• /
• pp.137-145
• /
• 2012

이 연구는 수산화나트륨과 탄산나트륨이 혼합된 알칼리 활성화제에 의한 고로슬래그 모르타르의 강도발현 특성을 파악하기 위한 연구이다. 주요 변수는 활성화제의 첨가량, 물-바인더비(W/B) 그리고 골재-바인더비(S/A)이다. 활성화제의 첨가량에 따른 강도 특성을 수산화나트륨 3%, 4% 및 탄산나트륨 4%~8%까지 조절하여 측정하였다. 물-바인더비는 0.45~0.60까지 그리고 골재-바이더비는 2.05~2.85의 범위 내에서 변화하며 측정하였다. 원재료의 주요 성분 및 수산화나트륨, 탄산나트륨에 포함된 산화나트륨($Na_2O$) 양에 따라 조합된 알칼리 품질계수($Q_A$)를 산정하고, 이를 적용하여 알칼리 활성 모르타르의 28일 압축강도 예측식을 제안하였다. 각 변수에 따른 시험값과 제안된 예측식을 통한 결과값은 오차범위 5% 이내의 범위에서 만족하는 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.174-179
• /
• 2001

The spinel $Fe_{3}O_{4}$ powders were synthesized using 0.2 $M-FeSO_4{\cdot}7H_{2}O$ and 0.5 M-NaOH by oxidation in air and the spinel $LiMn_{2}O_{4}$ powders were synthesized at 480 $^{\circ}C$ for 12 h in air by a sol-gel method using manganese acetate and lithium hydroxide as starting materials. The synthesized $LiMn_{2}O_{4}$ powders were mixed at portion of 5, 10, 15 and 20 wt% of $Fe_{3}O_{4}$ powders using a ball-mill. The mixed catalysts were dried at room temperature for 24 hrs. The mixed catalysts were reduced by hydrogen gas at 350 $^{\circ}C$ for 2 h. The carbon dioxide decomposition rates of the mixed catalysts were 90% in all the mixed catalysts but the decomposition rate of carbon dioxide was increased with adding $LiMn_{2}O_{4}$ powders to $Fe_{3}O_{4}$ powders.

• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.567-572
• /
• 2004

The variation of the sintered density and grain size of UO$_2$ as a function of the Li$_2$O amount and sintering atmosphere was observed. Li$_2$O enhanced the grain growth of the UO$_2$ pellet in H$_2$, but rather hindered it in $CO_2$ atmosphere. Grain size of the UO$_2$ and UO$_2$-0.1 wt%Li$_2$O pellets was, respectively, 8 $\mu$m and 100 $\mu$m at 168$0^{\circ}C$ in the H$_2$ atmosphere, and that of each pellet was, respectively, 24 $\mu$m and 17 $\mu$m at the same temperature in the $CO_2$ atmosphere. As-received Li$_2$O powder, which had been composed of Li$_2$O and LiOH, was converted to the Li$_2$CO$_3$ phase after heating to 80$0^{\circ}C$ in $CO_2$. On the other hand, the Li$_2$O and LiOH phases remained unchanged in H$_2$ atmosphere. In the H$_2$, the as-received Li$_2$O powder began to evaporate at about 105$0^{\circ}C$ and then about 20 wt% residue was left at 150$0^{\circ}C$. But, most of the Li elements evaporated at 150$0^{\circ}C$ in the $CO_2$ atmosphere.

• 한국가축번식학회지
• /
• 제17권4호
• /
• pp.357-363
• /
• 1994

To investigate the effect of extracellular matrix proteins on the in vitro development of blastomeres isolated from 2, 4, and 8-cell embryos(termed 1/2, 1/4 and 1/8 blastomeres, respectively) of ICR strain mice, those were cultured in fibronectin, gelatin, or collagen precoated culture dishes containing 1.5ml of NaHCO3-BMOC-3 medium at 37$^{\circ}C$ for 72 hrs, under the atmosphere at 5% CO2. and 95% air. Fibronectin, gelatin, or collagen significantly(P<0.01) increased and blastocyst formation rate compared with controls in 1/2(65.3, 59.2, 60.7% vs. 21.6%), 1/4(63.7, 53.4, 57.1% vs. 26.3%), and 1/8 blastomeres(61.1, 52.3, 53.7% vs. 19.1%). Both the nuclear number(P<0.05) and diameter of blastocysts(P<0.01) developed from balstomeres were significantly affected by the origin of blastomeres. The nuclear number of blastocysts developed from 1/2, 1/4, and 1/8 blastomeres ranged 29.3$\pm$1.6, 24.5$\pm$1.3, and 20..$\pm$1.2, respectively. And the diameter of those blastocysts was 88.3$\pm$2.4, 57.6$\pm$2.1, 39.8$\pm$1.9${\mu}{\textrm}{m}$, respectively.

• 한국결정성장학회지
• /
• 제24권6호
• /
• pp.268-273
• /
• 2014

$Y_2O_3$ 세라믹 소결체를 제작하기 위해, $Y_2O_3$ 분말을 분산한 상태에서 슬러리에 pH 조절제인 NaOH를 첨가하였으며 결합제로는 PVA, 가소제로는 PEG를 첨가하여 열분무 건조 공정을 거쳐 $Y_2O_3$ 과립형 분말을 제조하였다. ${\phi}14mm$ 크기의 $Y_2O_3$ 세라믹 성형체를 성형하고, $1650^{\circ}C$의 온도에서 소결하여 $Y_2O_3$ 세라믹 소결체를 제작하였다. $Y_2O_3$ 소결체의 미세구조, 밀도 및 내플라즈마 특성이 성형압력 및 소결시간에 따라 분석되었다. $Y_2O_3$ 소결체는 $CHF_3/O_2/Ar$ 플라즈마에 노출시켜, $Ar^+$ 이온빔에 의한 물리적반응 식각과 $CHF_3$로부터 분해된, $F^-$ 이온에 의한 화학적반응 식각에 의한 건식 식각 처리가 이루어졌다. 본 연구에서 $Y_2O_3$ 소결체 소결시간의 증가에 따라, 비교적 높은 밀도를 나타내었으며, 내플라즈마 특성이 향상되는 것으로 나타났다.