• 제목/요약/키워드: %24C_4A_3S%24

검색결과 1,850건 처리시간 0.029초

준밀리미터파 BWLL용 HBT 전력증폭기 설계 및 제작 (Design and Fabrication of a HBT Power Amplifier for Quasi Millimeter-wave Broadband Wireless Local Loop Applications)

  • 김창우;채규성
    • 한국통신학회논문지
    • /
    • 제27권3C호
    • /
    • pp.234-240
    • /
    • 2002
  • AlGaAs/InGaAs/GaAs HBT를 이용하여 준밀리미터파 광대역 무선망(BWLL) 시스템의 가입자용 장치에 사용 가능한 전력증폭기를 개발하였다. 베이스 접지 HBT 소자의 비선형 등가 회로를 추출하여 선형 및 비선형 회로 시뮬레이션을 통하여 출력 전력 정합 회로를 갖는 증폭기를 설계하였으며, 이를 기초로 하여 세라믹 기판 위의 스텁을 이용하여 하이브리드 형태로 증폭기를 구현하였다. 제작된 전력증폭기는 24.4 GHz에서 최대 포화 출력 25.5 dBm, 35%의 전력 부가 효율을 얻었으며, 24.8 GHz에서는 7.5 dB의 최대 선형 이득을 얻었다. 또한, 24.25 GHz∼24.75 GHz의 주파수 대역에서 22 dBm 이상의 포화 출력 전력과 25% 이상의 전력 부가 효율을 얻었다.

초고진공중에서 연질금속의 Tribo-Coating에 관한 윤활특성 (Lubricating Properties on Tribo-Coating of Soft Metals in Ultra High Vacuum)

  • 김형자;전태옥;가등건가
    • Tribology and Lubricants
    • /
    • 제10권3호
    • /
    • pp.18-28
    • /
    • 1994
  • Sliding friction between a spherical pin of 8mm in diameter and flat (disk) substrates coated with vacuum-deposited thin film was measured under ultra high vacuum pressure for various materials, various rates of film supply (8~210 nm/min), various sliding velocities (1.5~67.0 mm/s). It was found that the most effective lubrication was obtained when the adhesion between $Si_3N_4$ pin and SUS440C disk was high and that between $Si_3N_4$ pin and $Si_3N_4$ disk was low. When In film was used as a lubricant between $Si_3N_4$ pin and stainless steel disk, the friction coefficient had a value as low as 0.04. In this case, the normal load W and the sliding speed V were expressed as 10N and 24 mm/s for $10^{-6}Pa$. The dependence of $\mu$ on the thickness h of the Ag film, which was used as a lubricant between $Si_3N_4$ pin and SUS440C (Q) disk was expressed as $\mu$=0.12 for W=10N and V=24mm/s when the film was thicker than 100nm. A brief discussion on these relations is presented from the viewpoint of the real contact area.

수온에 의한 멍게(Halocynthia roretzi)의 물렁증 유도와 생리 및 조직학적 반응 (Induction of Soft Tunic Syndrome by Water Temperature and Physiological and Histological Responses of the Sea Squirt, Halocynthia roretzi)

  • 신윤경;박정준;명정인;김혜진;이정식
    • 환경생물
    • /
    • 제32권3호
    • /
    • pp.225-233
    • /
    • 2014
  • 수온조절 (6, 9, 12, 15, 18, 21, 24, $27{\circ}^C$)에 의해 유도된 멍게의 물렁증 진행에 따른 생리학적 특성을 연구하였다. 수온조절에 의한 물렁증 유도율은 수온 $15^{\circ}C$에서 가장 높았으며, $24^{\circ}C$에서 가장 낮았다. 물렁증은 피낭 색깔 및 탄성을 기준으로 S0, S1, S2, S3의 4단계로 구분하였다. 정상개체와 물렁증을 가진 개체들 사이에서 산소소비율과 여수율은 유의한 차이를 보였다. S0에 비해 S3단계에서 혈구 구성비의 가장 뚜렷한 변화는 multi-vacuole cell은 약 1/2 감소하였으며, morula cell은 약 10배 증가하였다. 기관계 구조의 변화는 피낭, 수관, 새낭, 육질부, 소화선에서 상피세포의 변성, 미세섬유의 변성, 혈구의 증가 및 근섬유의 변형이 확인 되었다. 이러한 모든 특징들은 멍게의 정상적인 생리학적 기능에 영향을 미칠 수 있다.

원동습지의 어류상과 군집구조 (The Ichthyofauna and Community Structure of Fish at Wondong Marsh in the Kyeongnam Province, Korea)

  • 양홍준;금지돈;이용호
    • 한국어류학회지
    • /
    • 제13권4호
    • /
    • pp.261-266
    • /
    • 2001
  • 낙동강 하류에 위치하는 경남 양산시 원동 배후습지의 어류를 2000년 6월부터 8월까지의 3차에 걸쳐 현장조사, 문헌 및 탐문조사를 수행한 내용을 요약하면 다음과 같다. 각종 조사방법을 통해 확인된 어류는 13과 32속 37종이었으나 현지조사에서 채집 또는 관찰에 의해 확인된 어류는 8과 22속 24종이었다. 30여년 전에 인위적으로 도입된 M. salmoides가 최근전국 각지의 하천에서 번성하고 있는데 본 조사지역인원동습지에서도 이 종은 높은 빈도로 나타났다. 현지조사에서 서식이 확인된 24종 중에서 Z. platypus (23.2%), S. gracilis majimae (14.2%), M. salmoides (9.6%), C. auratus (8.3%) 및 P. herzi (8.3%), 등 4종은 모든 조사정점에서 확인되었으며 출현빈도도 높았다. 한국특산어류는 S. variegatus wakiyae, S. chankaensis tsuchigae, S. gracilis majimae, M. yaluensis, C. herzi 및 O. platycephala 등 6종이고 외래종은 L. macrochirus와 M. salmoides였다. 조사지역의 어류군집을 분석한 결과 다양성과 균등성은 높게 나타났으나 우점도는 낮게 나타났다. 또 각 조사정점 간에 어종의 유사성은 0.55 이상으로서 중간등급이었다.

  • PDF

Ferroelectric Liquid Crystals from Bent-Core Molecules with Vinyl End Groups

  • Kwon, Soon-Sik;Kim, Tae-Sung;Lee, Chong-Kwang;Shin, Sung-Tae;Oh, Lee-Tack;Choi, E-Joon;Kim, Sea-Yun;Chien, Liang Chy
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권3호
    • /
    • pp.274-278
    • /
    • 2003
  • New banana-shaped achiral compounds, 1,3-phenylene bis [4-{4-(alkenyloxy) phenyliminomethyl}benzoate]s were synthesized by varying the length of alkenyl group; their ferroelectric properties are described. The smectic mesophases, including a switchable chiral smectic C $(Sm\;C^*)$ phase, were characterized by differential scanning calorimetry, polarizing optical microscopy and triangular wave method. The presence of vinyl groups at the terminals of linear side wings in the banana-shaped achiral molecules containing Schiff's base mesogen induced a decrease in melting temperature and formation of the switchable $(Sm\;C^*)$ phase in the melt. The smectic phases having the octenyloxy group such as $(CH_2)_6CH=CH_2$ showed ferroelctric switching, and their values of spontaneous polarization on reversal of an applied electric field were 120 nC/cm² (X=H) and 225 nC/ cm² (X=F), respectively. We could obtain ferroelectric phases by controlling the number of carbon atom in alkenyloxy chain of a bent-core molecule.

Cloning and Characterization of a Heterologous Gene Stimulating Antibiotic Production in Streptomyces lividans TK-24

  • Kwon, Hyung-Jin;Lee, Seung-Soo;Hong, Soon-Kwang;Park, Uhn-Mee;Suh, Joo-Won
    • Journal of Microbiology
    • /
    • 제37권2호
    • /
    • pp.102-110
    • /
    • 1999
  • Genetic determinant for the secondary metabolism was studied in heterologous expression in Streptomyces lividans TK-24 using Streptomyces griseus ATCC 10137 as a donor strain. Chromosomal DNA of S. griseus was ligated into the high-copy number Streptomyces shuttle plasmid, pWHM3, and introduced into S. lividans TK-24. A plasmid clone with 4.3-kb BamHI DNA of S. griseus (pMJJ201) was isolated by detecting for stimulatory effect on actinorhodin production by visual inspection. The 4.3-kb BamHI DNA was cloned into pWHM3 under the control of the strong constitutive ermEp promoter in both directions (pMJJ202); ermEp promoter-mediated transcription for coding sequence reading right to left: pMJJ203; ermEp promoter-mediated transcription for coding sequence reading left to right) and reintroduced into S. lividans TK-24. The production of actinorhodin was markedly stimulated due to introduction of pMJJ202 on regeneration agar. The introduction of pMJJ202 also stimulated production of actinorhodin and undecylproidigiosin in submerged culture employing the actinorhodin production medium. Introduction of pMJJ203 resulted in a marked decrease of production of the two pigments. Nucleotide sequence analysis of the 4.3-kb region revealed three coding sequences: two coding sequences reading left to right, ORF1 and ORF2, one coding sequence reading right to left, ORF3. Therefore, it was suggested that the ORF3 product was responsible for the stimulation of antibiotic production. The C-terminal region of ORF3 product showed a local alignment with Myb-related transcriptional factors, which implicated that the ORF3 product might be a novel DNA-binding protein related to the regulation of secondary metabolism in Streptomyces.

  • PDF

고강도 인바계 합금의 열팽창 및 인장 특성에 미치는 바나듐과 탄소 원소 첨가 영향 (Effects of V and C additions on the Thermal Expansion and Tensile Properties of a High Strength Invar Base Alloy)

  • 윤애천;윤신천;하태권;송진화;이기안
    • 소성∙가공
    • /
    • 제24권1호
    • /
    • pp.44-51
    • /
    • 2015
  • The current study seeks to examine the effects of V and C additions on the mechanical and low thermal expansion properties of a high strength invar base alloy. The base alloy (Fe-36%Ni-0.9%Co-2.75%Mo-0.7Cr-0.23Mn-0.17Si-0.3%C, wt.%) contains $Mo_2C$ carbides, which form as the main precipitate. In contrast, alloys with additions of 0.4%V+0.3%C (alloy A) or 0.4%V+0.45%C (alloy B) contain $Mo_2C$+[V, Mo]C carbides. The average thermal expansion coefficients of these high strength invar based alloys were measured in the range of $5.16{\sim}5.43{\mu}m/m{\cdot}^{\circ}C$ for temperatures of $15{\sim}230^{\circ}C$. Moreover, alloy B showed lower thermal expansion coefficient than the other alloys in this temperature range. For the mechanical properties, the [V, Mo]C improved hardness and strengths(Y.S. and T.S.) of the high strength invar base alloy. T.S.(tensile strength) and Y.S.(yield strength) of hot forged alloy B specimen were measured at 844.6MPa and 518.0MPa, respectively. The tensile fractography of alloy B exhibited a ductile transgranular fracture mode and voids were initiated between the [V, Mo]C particles and the matrix. Superior properties of high strength and low thermal expansion coefficient can be obtained by [V, Mo]C precipitation in alloy B with the addition of 0.4%V and 0.45%C.

Synthesis, Structure, and Reactivity of the [Fe4S4(SR)4]2- (R = 2-, 3-, and 4-Pyridinemethane) Clusters

  • Kim, Yu-Jin;Han, Jae-Hong
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권1호
    • /
    • pp.48-54
    • /
    • 2012
  • The $[Fe_4S_4]^{2+}$ clusters with 2-, 3-, and 4-pyridinemethanethiolate (S2-Pic, S3-Pic, and S4-Pic, respectively) terminal ligands have been synthesized from the ligand substitution reaction of the $(^nBu_4N)_2[Fe_4S_4Cl_4]$ (I) cluster. The new $(^nBu_4N)_2[Fe_4S_4(SR)_4]$ (R = 2-Pic; II, 3-Pic; III, 4-Pic; IV) clusters were characterized by FTIR and UV-Vis spectroscopy. Cluster II was crystallized in the monoclinic space group C2/c with a = 24.530 (5) $\AA$, b = 24.636(4) $\AA$, c = 21.762(4) $\AA$, ${\beta}=103.253(3)^{\circ}$, and Z = 8. The X-ray structure of II showed two unique 2:2 site-differentiated $[Fe_4S_4]^{2+}$ clusters due to the bidentate-mode coordination by 2-pyridinemethanethiolate ligands. Cluster III was crystallized in the same monoclinic space group C2/c with a = 26.0740(18) $\AA$, b = 23.3195(16) $\AA$, c = 22.3720(15) $\AA$, ${\beta}=100.467(2)^{\circ}$, and Z = 8. The 3-pyridinemethanethiolate ligand of III was coordinated to the $[Fe_4S_4]^{2+}$ core as a terminal mode. Cluster IV with 4-pyridinemethanethiolate ligands was found to have a similar structure to the cluster III. Fully reversible $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ redox waves were observed from all three clusters by cyclic voltammetry measurement. The electrochemical potentials for the $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ transition decreased in the order of II, III and IV, and the reduction potential changes by the ligands were explained based on the structural differences among the complexes. The complex III was reacted with sulfonium salt of $[PhMeSCH_2-p-C_6H_4CN](BF_4)$ in MeCN to test possible radical-involving reaction as a functional model of the [$Fe_4S_4$]-SAM (S-adenosylmethionine) cofactor. However, the isolated reaction products of 3-pyridinemethanethiolate-p-cyanobenzylsulfide and thioanisole suggested that the reaction followed an ionic mechanism and the products formed from the terminal ligand attack to the sulfonium.

인삼의 효과에 관한 세포생리학적 연구 -제 I 편 Saccharomyces의 분열에 미치는 영향- (A Cellular Physiological Study on the Effects of Korean Ginseng -Part I. Effects on the Division of Saccharomyces-)

  • 정너팔
    • The Korean Journal of Physiology
    • /
    • 제3권1호
    • /
    • pp.45-49
    • /
    • 1969
  • The effects of water extracts and powder of Korean ginseng on the division of Saccharomyces cerevisiae were studied. 1. The addition of several doses of water extracts and powder of ginseng to the yeast medium of Moyer and Coghill showed various promoted division of Saccharomyces. 2. The optimal dose of ginseng on tile division of Saccharomyces (0.08% dry ginseng medium solution per $10\;cells/mm^3$) could be recognized. 3. On the culture for 24 hours at $18^{\circ}C$, the cell number of control group was $13.25{\times}10^3\;cells/mm^3$ and that of the optimal dose group of water extracts of ginseng was $23.20{\times}10^3\;cells/mm^3$. On the culture, for 24 hours at $25^{\circ}C$, the cell number of control group was $16.85{\times}10^3\;cells/mm^3$ and that of the optimal dose group was $30.20{\times}10^3\;cells/mm^3$. The increasing rate of cell divison by the ginseng was about twice than that of control group. The optimal dose treatment of ginseng at $18^{\circ}C$ was more effective than control group at $25^{\circ}C$. 4. On the culture for 24 hours at $18^{\circ}C$, the increasing rate of water extracts of ginseng was 75.1%, and the rate of ginseng powder was 7.6%. On the culture for 24 hours at $25^{\circ}C$, the rate of water extracts of ginseng was 79.8%, and the rate of ginseng powder was 57.2%. Therefore water extracts of ginseng was more effective than ginseng powder of same dry weight, and the promoted effect of ginseng powder at $25^{\circ}C$ was more effective than at $18^{\circ}C$.

  • PDF

A New 5α, 8α-Epidioxy Sterol from the Marine Sponge Plakortis simplex

  • Oh, Jung-Soon;Kim, Myoung-Ha;Song, Ah-Rin;Rho, Jung-Rae
    • 한국자기공명학회논문지
    • /
    • 제14권1호
    • /
    • pp.1-8
    • /
    • 2010
  • Four 5,8-epidioxy sterols were isolated from the marine sponge Plakortis simplex. Their structures were completely determined by an extensive NMR analysis and comparison with NMR data of similar compounds for absolute stereochemistry of the side chain. The compounds were assigned as 5,8-epidioxy- (24S)-ethylcholesta-6,22(E),25-trien-3-ol(1), 5,8-epidioxy-(24S)-methylcholesta- 6,22(E)-dien-3-ol(2), 5,8-epidioxycholesta-6,22(E)-dien-3-ol(3) and 5,8- epidioxycholesta-6-en-3-ol (4).