• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.366-373
• /
• 2020

According to Article 77 of the Ship Safety Act and Article 97(2) of the Enforcement Ordinance of the Ministry, the Recognized Organization (RO) personnel (ship surveyors) responsible for statutory survey shall have educational qualifications and experience in a specific field or obtain a license under the National Technical Qualifications Act. However, graduates from maritime high schools and those who completed the short-term course of the Ocean Polytec did not satisfy the qualification standards for the RO personnel since they did not graduate from the departments of maritime/fisheries or shipbuilding. Major shipping countries such as the United Kingdom, the United States, and Canada use the IACS (International Association of Classification Societies) regulations, and the Ship Safety Act in Japan has eliminated the qualification requirements for ship surveyors. In particular, under the IMO (International Maritime Organization) and IACS regulations, the RO personnel shall have as a minimum the following formal educational background: a degree or equivalent qualification from a tertiary institution recognized within a relevant field of engineering or physical science (minimum two years' program); or a relevant qualification from a marine or nautical institution and relevant sea-going experience as a certified ship officer; and competency in the English language commensurate with their future work. Considering that Article 17 of the Enforcement Decree on Public Officials Appointment Examinations prohibits educational restrictions and there are no educational restrictions on the qualifications of British and Japanese surveyors, if the maritime high school graduates have sufficient sea-going experience, education, and training, they could be recognized as meeting the qualification requirements. Moreover, those who completed the short-term course of the Ocean Polytec could also be recognized as meeting the qualification requirements because they are required to have at least a professional bachelor's degree (in the case of a third-class CoC (Certificate of Competancy)) and some sea-going experience after completion.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.5
• /
• pp.321-328
• /
• 2015

In recent years, there has been an increasing demand to apply the new IACS(International Association of Classification Societies) standards for ice and polar-classed ships. For ice-class vessel propulsion system, the ice impact torque design criterion is defined as a periodic harmonic function in relation to the number of the propeller blades. However, irregular or transient ice impact torque is assumed to occur likely in actual circumstances rather than these periodic loadings. In this paper, the reliability and torsional vibration characteristics of a comparatively large six-cylinder marine diesel engine for propulsion shafting system was examined and reviewed in accordance with current regulations. In this particular, the transient ice impact torque and excessive vibratory torque originating from diesel engine were interpreted and the resonant points identified through theoretical analysis. Several floating ice impacts were carried out to evaluate torque responses using the calculation method of classification rule requirement. The Newmark method was used for the transient response analysis of the whole system.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.213-220
• /
• 2010

Following the application of Formal Safety Assessment(FSA) to bulk carriers, crude oil tankers and large passenger ships, an urgent need to consider the safety of general cargo ships has recently been raised through the International Maritime Organization(IMO)(IMO, 2006a), and related FSA studies are being carried out by International Association of Classification Societies(IACS) as a preparatory work for the discussion on the issue of general cargo ship safety in the IMO committee. FSA is a structured and systematic methodology which is based on the techniques of risk analysis and cost benefit assessment to assist in the decision-making process, and aims at enhancing maritime safety, including protection of life, health, the marine environment and property. FSA can be used as a tool to facilitate the development of regulatory changes equitable to the various parties, with a view to aiding the achievement of consensus, and to help in the evaluation of new regulations and in making a comparison between existing and possibly improved regulations(IMO, 2007). This study aims at verifying the usefulness of FSA methods as a tool to conduct a safety assessment of general cargo ships flying the Korean flag, and providing useful information on 'the safety of general cargo ships' for IMO committee's discussion on the matter at a future session. FSA comprises five steps, however, steps 1(Hazard identification) and 2 (Risk analysis) from the FSA study for the Korean-flagged general cargo ships are discussed in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.40-46
• /
• 2017

Shipping activities have become possible in the Arctic Ocean due to melting ice by global warming. An increasing number of vessels are passing through the Arctic Ocean consequently bringing concerns of ship-iceberg collisions. Thus, most classification societies have implemented regulations to determine requirements for ice strengthening in ship structures. This paper presents the simulation results of an ice-strengthened polar class ship after an iceberg collision. The ice-strengthened polar class ship was created in accordance with the Unified Requirements for a Polar-Ship (IACS URI). An elastic-perfect plastic ice model was adopted for this simulation with a spherical shape. A Tsai-Wu yield surface was also used for the ice model. Collision simulations were conducted under the commercial code LS-DYNA 971. Hull deformations on the ice-strengthened foreship structure and collision interaction forces have been analysed in this paper. A normal-strength ship structure in an iceberg collision was also simulated to present comparison results. Distinct differences in structural strength against ice impact forces were shown between the ice-strengthened and normal-strength ship structures in the simulation results. About 1.8 m depth of hull deformation was found on the normal ship, whereas 1.0 m depth of hull deformation was left on the ice-strengthened polar class ship.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.5
• /
• pp.225-232
• /
• 2013

The influence of aging treatment, addition elements and rolling reduction ratio on the microstructure, mechanical, electrical and bendability properties of Cu-Ni-Si-P-x (x = Fe, Sn, Zn) alloys for connector material application was investigated. SEM/EDS analysis exhibited that Ni2-Si precipitates with a size of 20~100 nm were distributed in grains. Fe, Sn, Zn elemnets in Cu-Ni-Si-P alloy imporved the mechanical strength but it was not favor in increasing of electrical conductivity. As higher final rolling reduction ratio, the strength and electrical conductivity is increased after aging treatment, but it indicated excellent bendability. Especially, Cu-2Ni-0.4Si-0.5Sn-0.1Fe-0.03P alloy show the tensile strength value of 700MPa and the electrical conductivity was observed to reach a maximum of 40%IACS. It is optimal for lead frame and connector.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.308-314
• /
• 2020

A commercial AA1070 alloy for electrical wire is severely deformed by drawing process in which a rod with an initial diameter of 9mm into is reduced to a wire of 2mm diameter. The drawn AA1070 wire is then annealed at various temperatures from 200 to 450 ℃ for 2h. Changes in microstructure, mechanical properties and electrical properties of the specimens with annealing temperature are investigated in detail. The specimen begins partially to recrystallize at 250 ℃; above 300 ℃ it is covered with equiaxed recrystallized grains over all regions. Fiber textures of {110}<111> and {112}<111> components are mainly developed, and {110}<001> texture is partially developed as well. The tensile strength tends to decrease with annealing temperature due to the occurrence of recovery or/and recrystallization. On the other hand, the elongation of the annealed wire increases with the annealing temperature, and reaches a maximum value of 33.3 % at 300 ℃. Electric conductivity of the specimens increases with annealing temperature, and reaches a maximum value of 62.6 %IACS after annealing at 450 ℃. These results are discussed in comparison with those for the other aluminum alloy.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.60-67
• /
• 2003

For risk or reliability assessment of ship structures against particular hazardous situations such as total loss or sinking due to hull girder collapse, the short-term based response analysis rather than the long-term response analysis is required to determine wave-induced bending moments when the ship encounters a storm of specific duration and with a specified small encounter probability. In the present study, the effects of operational condition and sea states on wave-induced bending moments of large merchant vessels are investigated. A series of the short-term response analyses for a hypothetical VLCC and a Capesize bulk carrier (CSBC) are carried out with varying operational condition and sea states which include ship speed, significant wave height and wave persistence time, using the linear-strip theory based program ABS/SHIPMOTION and the MIT sea-keeping tables. The computed results are also compared with the IACS design formula predictions. The results and insights developed from the present study are summarized.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.815-821
• /
• 2015

Maritime safety has been more critical recently due to the occurrence of shipboard accidents involving prime movers. As such, the propulsion shafting design and construction plays a vital role in the safe operation of the vessel other than focusing on being cost-efficient. Smaller vessels propulsion shafting system normally install high speed four-stroke diesel engine with reduction gear for propulsion efficiency. Due to higher cylinder combustion pressures, flexible couplings are employed to reduce the increased vibratory torque. In this paper, an actual vibration measurement and theoretical analysis was carried out on a propulsion shafting with V18.3L engine installed on small car-ferry and revealed higher torsional vibration. Hence, a rubber-block type flexible coupling was installed to attenuate the transmitted vibratory torque. Considering the flexible coupling application factor, reduction gear stability due to torque variation was analyzed in accordance with IACS(International Association of Classification Societies) M56 and the results are presented herein.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2014

For connector material applications, the influence alloying elements of Mn, Cr, Fe, and Ti and cold rolling reduction on the mechanical property, electrical conductivity and bendiability of Cu-Ni-Si-P alloy was investigated. The hot rolled plates were solution treated at $980^{\circ}C$ for 1.5 h, quenched into water, cold rolled by 10% and 30% reduction in thickness, and then aged at $440{\sim}500^{\circ}C$ for 3, 4, 5 times. respectively. Cu-Ni-Si-P-x alloys cold rolled by 10 reduction before heat treatment have a good bendability compare to cold rolled by 30 reduction. Cu-3.4Ni-0.8Si-0.03P-0.1Ti shows the peak strength value of 759 MPa, an electrical conductivity of 39%IACS, an elongation of 10% and a hardness of 256 Hv aged at $440^{\circ}C$ for 6 hrs. Thus it is suitable for lead frame and connector.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.1-7
• /
• 2017

It has been developed large mooring fittings having the capacity of 160 tons and 180 tons installed on 170K LNG FSRU. The finite element analysis for the mooring fittings was carried out in order to check the structural integrity and to confirm satisfaction of the rule requirements. The 3 kinds of mooring fittings such as chock, bollard and universal fairlead are selected for FE analysis and load test. According to the FE analysis results, all the stress levels satisfied the acceptance criteria guided by the IACS UR A2, ISO standard, ship rules and OCIMF. As test results under design load, no structural defects were found.