• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.569-581
• /
• 2012

The levee is the facility which is constructed along with river for the protection of landside and for passage of water when there is a flood. When the seepage is exposed to the atmosphere on the landside surface of levee, it may eventually lead to levee failure. The seepage water may be removed from the landside surface by a properly designed drainage system. The purpose of the study is to show seepage control effect of a pervious toe drain, and to compare two drainage methods of a pervious toe drain. One is the pervious toe drain suggested by U.S. Army Corps of Engineers (USACE) and the other is that suggested by Japan Institute of Construction Engineering (JICE). The levee model constructed has the following dimension: the base width is 2.6 m; the crest width is 0.4 m; the side slope 1 : 2. The water depth in the riverside is 0.5 m. The shape of the toe drain by USACE is triangular. The shape of the toe drain by JICE is rectangular. They were installed with the base length of 0.4 m. The levee model without the toe drain showed saturation surface on the land side in the experiment but not with the toe drain. The experiment results was applied to a numerical analysis model using SEEP/W to calibrate and verify. The numerical analysis results for 35 cm and 30 cm drain width showed that the drain by JICE is a little bit safer than the drain by USACE. It is also easier to construct the toe drain by JICE. The results in the study would be applied to plan the seepage control for a levee with pervious toe drain.

• Korean Journal of Weed Science
• /
• v.15 no.1
• /
• pp.30-38
• /
• 1995

Soil-applied pre-emergence herbicide, pyrazolate(4-(2, 4-dichlorobenzoyl)-1, 3-dimethyl pyrazol-5-yl-p-toluene sulphonate) induced, twist effect of shoots of barnyardgrass under dry conditions, and etiolated leaf and stem of that under water condition. Plant height and root length of rice broadcast on soil surface were similar to the untreated control, but plant height of rice drilled in soil was more inhibited than root length as compared with the untreated control, while development of barnyardgrass seedling was severely inhibited at 20 days after application. The inhibition rate was much higher under water condition than under dry condition, but difference in rice and barnyardgrass did not abserve. However, growth of transplanted rice shown to increase to the untreated control. Shoot and root fresh weight of rice broadcast on soil surface was increase as compared with the untreated control, and that of rice drilled in soil was not affected whereas that of barnyardgrass was severely inhibited by 42% and 41%, respectively. Under dry condition at 20 days after pyrazolate application while root growth of rice broadcast on soil surface under water condition was deadly inhibited and development of barnyardgrass was almost completely inhibited. On the other hand, microscopic studies showed that constriction of mesophyll cell by destruction of chloroplast of barnyardgrass were occurred only under dry condition, whereas damage of rice and barnyardgrass under water and transplanting condition were not observed. Anatomical change in the meristernatic region of rice and barnyardgrass was not occurred, and similar to intact plant regardless of cropping patterns.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2014

Objectives: Fabry disease (FD) is a lysosomal storage disease caused by the inappropriate accumulation of globotriaosylceramide (Gb3) in tissues due to a deficiency in the enzyme ${\alpha}$-galactosidase A. Hypertrophic cardiomyopathy is one of the chronic complications of FD. We tried to evaluate the prevalence of Fabry disease in the Korean patients with left ventricular hypertrophy (LVH). Methods: A total of 257 patients with LVH were recruited and they were 172 males (mean 56 years, range 30-81 years) and 84 females (mean 66 years, range 45-85 years). Urinary Gb3 was used to screen FD by high performance liquid chromatography-tandem mass spectrometry. Confirmatory tests were done by alpha-galactosidaseA activity using fluorometric assay and by GLA mutation analysis using sequencing. Results: Four patients were screening positive by urinary Gb3 analysis (cutoff, 25 ug/mmol creatinine). But, one female patient was diagnosed with FD confirmed by enzyme analysis in leukocytes as well as by genetic analysis (1/257 patients, 0.4%). She showed 54.3 ug/mmoL creatinine of Gb3 and 15.5 nmole/hr/mg protein (reference range, $55.2{\pm}12.7nmole/hr/mg$ protein) of alphagalactosidase A activity. And she had a heterozygous GLA mutation of c.796G>A (p.D266N). Her daughter was found to be a carrier for FD confirmed by GLA mutation analysis. Asymptomatic carrier showed 25.5ug/mmol creatinine of Gb3 and 42.5 nmole/hr/mg protein (reference range, $55.2{\pm}12.7nmole/hr/mg$ protein) of alpha-galactosidase A activity. Conclusions: The prevalence of FD in Koran patients with LVH was detected as 0.4%. Although the prevalence seems to be low, screening studies are of great importance for detecting hidden cases as well as for identifying other effected family members.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.268-276
• /
• 2007

Urban atmosphere may play as a harbinger for the future climate change with respect to temperature and $CO_2$ concentration. The Seoul metropolitan area is unique in rapid urbanization and industrialization during the last several decades, providing a natural $CO_2$ dome with increased temperature. This study was carried out to evaluate the feasibility of using the urban-rural environmental gradient in replacement of the IPCC mid-term scenario (after 30-50 years). For this, we measured atmospheric $CO_2$ concentration and air temperature at three sites with different degree of urbanization (Seoul, Suwon, and Icheon). Results from 11-month measurement can be summarized as follows: (1) The annual mean $CO_2$ concentration across 3 sites was in the order of Seoul (439 ppm) > Suwon (419 ppm) > Icheon (416 ppm), showing a substantial urban-rural environmental gradient. (2) The diurnal fluctuation in $CO_2$ concentration was greater in summer than in winter, showing the effect of photosynthesis on local $CO_2$ concentration. (3) The daily maximum $CO_2$ concentration was observed at 0500 LST in spring and summer, 0800 LST in autumn, and 0900 LST in winter, showing the sunrise-time dependence. (4) The observed hourly maximum $CO_2$ concentration averaged for the whole period was 446 ppm in Seoul at 0700 LST, while the minimum was 407 ppm in Suwon at 1500 LST. (5) Compared with the background atmospheric concentration of $CO_2$ in Anmyeon-do (377.4 ppm annual mean), $CO_2$ concentration of the study sites was higher by 14% in Seoul, by 10% in Suwon, and by 9% in Icheon. The observed $CO_2$ concentration in Seoul reached already 98% of the 2030-2040 projection (450 ppm) and 80% of the 2040-2050 projection (550 ppm) under the IPCC BAU scenario, showing a feasibility of using the $CO_2$ dome of Seoul as a natural experimental setting for the mid-term climate change impact assessment.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.85-99
• /
• 2020

This article analyzes the influence of sectoral system of innovation(i.e. technological regime, market demand, networks, and institution) on innovative performances(i.e. product-, process-, organizational-, marketing-, and environmental- innovation) in Korean environmental industry, conducting a multiple regression analysis based on survey data from 201 Korean environmental companies. As the results, product innovation is positively influenced by internal technology accumulation and market demand response, while not affected by external knowledge utilization, market competition, networks among market and non-market agents, government support and regulation. Process innovation is positively influenced by internal technology accumulation, networks among non-market agents and regulation, but not by external knowledge utilization, market demand response, market competition, networks among market agents, and government support. While organizational innovation is positively influenced by internal technology accumulation, external knowledge utilization and regulation, it is not affected by market demand response, market competition, networks among market and non-market agents, and government support. While marketing innovation is positively influenced by internal technology accumulation, networks among non-market agents, and government support, it is not affected by external knowledge utilization, market demand response, market competition, networks among market agents, and regulation. Environmental innovation is positively influenced by external knowledge utilization and regulation, but negatively influenced by market competition. It is not affected by internal technology accumulation, market demand response, networks among market and non-market agents, and government support. Such results suggests the following policy implications. First, it is necessary to expand the sphere of relating markets through the application of convergence technology, new regulations, and overseas markets. Second, reinforcing ecosystems among environmental market agents through demand-linked joint R&D should be revitalized. Third, it is needed to strengthen more supporting policies rather than regulation. This article has the limitation of using the survey data. And further researches on the environmental sectoral system of innovation structure itself will be tried.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.146-157
• /
• 1999

The knowledge on Korean traditional ceremony foods was evaluated from 271 Korean American housewives residing in the New York and New Jersey metropolitan area. A questionnaire was designed to collect information on demographic background of the subject and their knowledge on ceremonial foods and table settings. Over half of the respondents considered table settings for ceremonial foods are important and most of them knew and learned Korean ceremonial foods from either their own mothers or mother-in-laws. About three-quarters responded that traditional table settings need to be simplified and half of them stated that family education is the best way of proceeding knowledge on ceremonial foods. Most of them have knowledge of table settings for a child's birthday, a baby's first birthday, a baby's hundredth day after birth, New Year's and full moon days. However, few respondents were knowledgable about other ceremonial foods. Practically, they are more likely to simplify the table setting for Korean traditional ceremonies, such as child's birthday, 60th birthday, wedding, and memorial days. The results of this study could be used to plan traditional cultural education programs for Korean immigrants in the U.S. so that they can make informed decisions in building cultural identities in the new environment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.203-212
• /
• 2005

Cellulose insulation is primarily manufactured from recycled newsprint and treated with fire retardants for the fire resistance. Thanks to the fire retardants, it is not combustible and flammable. In addition to that, Its thermal resistance is much better than that of fiberglass or rock wool. It is made from waste paper and easily decayed when it is demolished, and it has small embodied energy. So it is very environment-friendly building material. For broader use of cellulose insulation in buildings in Korea, it is necessary to test its physical performance to compare the results with the requirements on the Korean Building Code. To this end, apparent thermal conductivity (ka) measurements of Korean-made loose-fill cellulose insulations were recently completed using equipment that was built and operated in accordance with ASTM C 518 and the fire resistance was tested in accordance with ASTM C 1485. Korean loose-fill cellulose has thermal conductivity about 5% greater than the corresponding U.S. product at the same density. This is likely due to differences in the recycled material being used. Both spray-applied and loose-fill cellulose insulation lose about 1.5% of their thermal resistivity for $5.5^{\circ}C$ increase in temperature. The fire resistance of cellulose insulation is increased in linear proportion to the increase of the rate of fire retardant. Thanks to the high fire resistance, cellulose insulation can be used as a substitution of Styrofoam or Urethane foam which is combustible. The thermal conductivity of cellulose insulation was $0.037-0.043W/m{\cdot}K$ at the mean specimen temperature from $4-43^{\circ}C$. It corresponds to the thermal resistance of "Na Grade" according to the Korean Building Code. The effect of chemical content on thermal conductivity was negligible for all but the chemical-free specimen which had the highest value for the thermal conductivity over the temperature range tested. The thermal resistance of cellulose insulation is better than that of fiberglass or rock wool, and its fire resistance is higher than that of Styrofoam or Urethane foam. Therefore it can be substituted for those above considering its physical performance. Cellulose insulation is no more expensive than Styrofoam or rock wool, so it is recommended to use it more widely in Korea.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.262-269
• /
• 2002

The purpose of this study was to compare the effect of distance of light tip to resin surfaces and exposure time on the polymerization of surface and 2 mm subsurface of composite resins cured with two light sources; conventional halogen light (XL 3000, 3M, U.S.A.) and plasma arc light (Flipo, LOKKI, France) and compare the uniformity of polymerization from the center to the periphery of resin surfaces according to polymerization diameter cure with two light sources. From the experiment, the following results were obtained. 1. Difference of relative light intensity decrease in plasma arc light smaller than that of conventional halogen light(p<0.05). 2. In all groups, microhardness of top surfaces was decreased when distance of the light tip to resin surfaces is more than 2mm and increased according to increase of exposure time(p<0.05). 3. Difference of microhardness of the 2mm subsurface was rapidly decreased when distance of light tip to resin surfaces is more than 4mm(except, plasma arc light exposure time of 3 seconds). and the distance of light tip to resin surfaces and exposure time more affected 2mm subsurface rather than top surface(p<0.05). 4. Although exposure time was increased, difference of microhardness of the 2mm subsurface with the distance of light tip to resin surfaces was relatively high in groups between below 4mm and 6 mm(p<0.05). 5. Plasma arc light exposure time of 6 to 9 seconds produced microhardness values and microhardness change according to various distance similar to those produced with 40 to 80 second exposure to a conventional halogen light(p>0.05). 6. In all groups, microhardness was decreased gradually from the center to the periphery of resin surfaces(p<0.05).

• Korean Journal of Psychosomatic Medicine
• /
• v.8 no.1
• /
• pp.88-97
• /
• 2000

Objectives : This study was aimed to investigate the emotional state and personality factors of patients with vitiligo, and the impacts of clinical characteristics. Methods : Twenty one patients with vitiligo and 20 normal controls were studied. Beck Depression Inventory(BDI), Spielberg's State and Trait Anxiety Inventory(STAI) and Cattell's 16 Personality Factors Questionnaire(16-PF) were used for assessment. Statistically, t-test, Oneway ANOVA, Mann-Whitney U test and Pearson's correlation test were used. Results : The Results were as follows. 1) The comparison of total score of BDI, state anxiety and trait anxiety between the patients with vitiligo and normal controls were not significantly different. 2) In first-stratum source traits of 16-PF, normal control group was significantly higher than the patients with vitiligo in H-factor(Boldness) and I-factor(Tender-mindedness). In second-stratum source traits of 16-PF, there was no significant difference between the patients with vitiligo and normal control in all factors. 3) According to sex, the comparison of total scores of BDI, STAI between male and female patients with vitiligo were not significantly different. In the comparison of 16-PF, female patients were higher than male patients in I-factor only. 4) As according to age(under and over 30 years of age), the comparison of total scores of BDI, STAI between patients over 30 years of age and under 30 years of age were not significantly different. In the comparison of 16-PF, patients over 30 years of age were higher than patients under 30 years of age in E-, G-, L-, M-, Q2-, Q3-, IND-, SUP-, and CRE-factor. 5) As according to the presence of progression of vitiligo and the presence of visible lesion, the comparison of total scores of BDI, STAI and 16-PF were not significantly different. 6) There were no significant correlation between the duration of the vitiligo and BDI, STAI-S, STAI-T, and 16-PF. Conclusions : There were no significant difference between patients with vitiligo and normal controls on the emotional state and personality characteristics. But patients with vitiligo were more bolder and tender-minded than normal controls on 16-PF. The author propose that methods of treatment to resolve problems of the interpersonal relations will be helpful.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).