• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.624-632
• /
• 2017

This study aims to suggest a new evaluating system for academic books in the field of humanities and social sciences in Korea. The data comprised the evaluating systems for researchers' academic achievements at 27 Korean and overseas universities, and questionnaire from researchers. The findings showed that academic books were rated higher twice than articles in Korean universities with various criteria. Universities in the US had no standardized systems, but publishers evaluated academic books. The UK and France had authorized organizations, REF and HCERHE, to evaluate researchers' products, whereas, in Japan, departments evaluated them without fixed systems. About 84% of Korean researchers preferred external evaluation on academic books. It is proposed to establish associations' evaluation, 'more than 200 pages and ISBN', and qualitative approach. 200-600 points can be given on books in the correlation of universities, associations, and Korea Research Foundation.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.785-792
• /
• 2019

In parallel operation of multiple power converter modules, equal power distribution among modules shall be made to improve the reliability of the system. In this paper, a novel droop method is proposed to present improved current distribution characteristics. In the proposed method, if the current in each module become greater than the current set-point value, the output voltage set-point is raised to improve the current distribution characteristics. Meanwhile, when the output voltage is to be managed within the tolerance range, the range of the usable control IC reference value ($v_{ref}$) will be reduced if the output voltage setting is always raised. Thus, in case the output voltage set-point among modules is reversed, the downward adjustment is introduced. The proposed method was experimentally validated with a 17.5V/500mA prototype of two boost converters operating in parallel.

• Language and Information
• /
• v.11 no.2
• /
• pp.67-86
• /
• 2007

The semantic literature on definiteness and specificity shows that the former is relatively an established notion, whereas the latter is still a vague notion that needs to be more clarified and confirmed. Given this, Ionin (2006) argues for the reality of specificity based on the informal use of this. She proposes this in spoken English as a specificity marker which has a semantic feature indicating "peaker intent to refer" and "noteworthiness." She also provides as evidence the results of some crosslinguistics studies including an L2 acquisition study with both L1-Russian and L1-Korean L2-English learners. However, this paper will argue that the informal use of this does not seem to mark specificity according to Ionin's definition of specificity. It will also be argued that the L2 acquisition study cannot be used as evidence for the reality of specificity. Based on these arguments, this paper will try to redefine specificity, based on the notions of existence and uniqueness.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.22-35
• /
• 1995

In this paper, an electronic control unit is developed using 16bit microcomputer for automobile engine. This system incorporate AFS(Air Flow Sensor) of Hot Wire type, DIS(Direct Ignition System), ISC(Idle Speed Control) system, CAS(Cranke Angle Sensor) and other peripheral device. This system includes hardware and software to facilitate precision control of both fuel injection and ignition timing. Especially, this controller consists of position signal(180 teeth) and 4 REF signals. Present system has maximum $720^{\circ}CA$ delay. But this system has maximum $180^{\circ}CA$. Thus, this system is able to precision control both fuel injection and ignition timing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.243-248
• /
• 1994

The purpose of this study is to develop Deterioration Diagnosis System for the Reinforced Concrete Structure which can be used preliminary in determining the factors causing deterioration by simple inspection and mapping of the indicators of deterioration. Total 29 items compromising material, structural and constructional factors causing deterioration were considered in this system. Also the indicators of deterioration were subdivided into 54 items such as concrete crack pattern and steel corrosion etc. Each indicator of deterioration was quantatified by allocating and giving grade to each item which has extra weight according to its conscquence. Satisfactory results were obtatined by applying this Diagnosis system to the indicators of deterioration in ref. [3]. Further research was required on the indicators of deterioration in construction site to enhance the field applicability of this system.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.1
• /
• pp.80-89
• /
• 2006

This study is derived from relation between the natural landscape and architectural landscape. The type of landscape in Donghae seaside consist of three; Road, Mountain, Seaside. And we selected three landscapes about individual housing; Western, Traditional, Modern. This paper is analyzed 18-simulation scenes, which evaluated with semantic differential method in using 12-bipolar adjectives. The results of this study are as follows(ref: table 6). 1)The housing of western style do not correspond with landscape of Road, but landscape of mountain and seaside were suitable to the western style. 2)Mountain in Donghae seaside harmonizes with housing of traditional style. 3)Even though the housing of modern style were marked low assessment in three landscape, we found out relation, modern housing was well-matched with load landscape.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.356-366
• /
• 2000

In this paper, a nonlinear $H_2/H_\infty/LTR$ control for the flexible inverted pendulum of a parallel type with Coulomb friction is presented. The dynamic equation for this system is derived by the Hamilton's principle and assumed-mode method. This hard nonlinear system can be modeled by a the quasi-linear state space model using the REF method. It is shown that the $H_2/H_\infty$ control can be applied to the nonlinear controller design of the system having Coulomb frictions if the proper LTR conditions are satisfied. In order to present the usefulness of the suggested control method, the nonlinear $H_2/H_\infty/LTR$ controller is designed to control the Position of the end point of the flexible inverted pendulum that has Coulomb frictions present in actuator parts. The results are given via computer simulations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.138-141
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.1
• /
• pp.43-48
• /
• 1998

In order to provide basic information for the estimation of evapotranspiration for grass (Joycia Japonica), both field lysimeter experiment and model prediction were performed to estimate daily ET Various methods were used to predict daily reference crop ET and crop coefficients. Measured mean daily ET during the 1997 growing season was 4.5mm Model predicted mean daily ET during the 1997 growing season varied from 3.6 to 4.7mm depending on the prediction model Crop coefficients varied from 0.96 to 1.27 depending on the prediction model Comparison of the seven reference crop ET prediction methods used in this study shows that the Penman-Monteith method gave the smallest ET while the Hargreaves method gave the largest ET. The crop coefficient by the corrected Penman method was 1.03, which is closest to 1.0, suggesting that this method may he the best prediction method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.3
• /
• pp.1-10
• /
• 1988

The initial selection of plants is the decisive step in the ultimate success of any landscape planting. This study intended to establish a reasonable selecting criteria of tree in the landscape through the holistic consideration of aesthetic, functional, cultural, operational and ecological viewpoints. The matrices of evaluating the fitness of tree were modulated to 10 categories ; availability from the established nursery. aesthetic value, indigenous to the locality, maintenance, soil fertility requirement, environmental tolerances. growth rate. wild-life food production. use of plants in design and user's likes. This 10 categories were weighted to their fitness as high(10 points), medium(8 points) and low(5points). Thus suitable plants were identified which got 70 more points from total 100 points. Such a method was believed as a rational process to get trust from client. to persuade uneducated client and to be free from designer's prejudice through a case study. But it is important to landscape designer to recognize the relationship between the rationality which prevails throughout the modern technical world and the intuitive aspects of design that are essential for developing creative solutions to encourage creativity as well as analytical responsibility.