• 전력전자학회논문지
• /
• 제4권5호
• /
• pp.423-432
• /
• 1999

This paper proposes a 12­pulse diode rectifier system with low kVA components suitable for powering switch mode power supplies or ac/dc converter applications. The proposed 12-pulse system employs a polyphase transformer, a zero sequence blocking transformer (ZSBT) in the dc link, and an interphase transformer. Results produce near equal leakage inductance in series with each diode rectifier bridge ensuring equal current sharing and performance improvements, The utility input currents and the voltage across the ZSBT are analyzed the kVA rating of each component in the proposed system is computed. The 5th , 7th , 17th and 19th harmonics are eliminated in the input line currents resulting in clean input power. The dc link voltage magnitude generated by the proposed rectifier system is nearly identical to a conventional to a conventional 6-pulse system. The proposed system is suitable to retrofit applications as well as in new PWM drive systems. Simulation and experimental results from a 208V , 10kVA system are shown.

• 해양환경안전학회지
• /
• 제12권4호
• /
• pp.301-306
• /
• 2006

인공용승구조물 설치해역의 구조물에 의한 유동분포를 파악하기 위하여 ADCP(Acoustic Doppler Current Profiler)를 이용한 정선관측을 2006년 5월 4일(소조기) 및 5월 30일(대조기)에 실시하였다. 동서-남북(un-component) 유동성분의 분석결과, 조시에 따른 흐름이 전반적으로 남동류가 우세하게 나타났으며 구조물 주변역의 표층에서 수심 $30\sim40m$까지의 유동과 이심에서의 유동이 서로 다르게 나타났다. 연직유동성분(w-component)은 소조기시 구조물 주변해역과 서쪽역에서는 상승류의 흐름이 나타났고 남쪽역, 북쪽역 및 동쪽역에서는 하강류의 흐름이 나타났다. 대조기 W-W line의 낙조시에는 동쪽과 서쪽해역에서 상승류의 흐름이 나타났으며 구조물 중심 동쪽 부근에서 상승류의 흐름이 나타났고 구조물에서 멀어질수록 하강류의 흐름이 나타났다. 대조기시의 분포는 창조시 S-N line에서 상승류의 분포가 전반적으로 나타났다. 또한 구조물 구축 주번해역에서의 단위면적당 상승류의 유량은 대 소조기 창 낙조시에 하강류에 대한 유량보다 크게 나타났다. 소조기에는 창조시보다 낙조시에 더 강하였으며, 대조기에는 창조시가 낙조시보다 큰 유량을 나타내고 있다.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.204-209
• /
• 2013

Objectives: The objective of this in vitro study was to evaluate and compare the cytotoxicity of four different root canal sealers i.e. Apexit Plus (Ivoclar Vivadent), Endomethasone N (Septodont), AH-26 (Dentsply) and Pulpdent Root Canal Sealer (Pulpdent), on a mouse fibroblast cell line (L929). Materials and Methods: Thirty two discs for each sealer (5 mm in diameter and 2 mm in height) were fabricated in Teflon mould. The sealer extraction was made in cell culture medium (Dulbecco's Modified Eagle's Medium, DMEM) using the ratio 1.25 $cm^2/mL$ between the surface of the sealer samples and the volume of medium in a shaker incubator. Extraction of each sealer was obtained at 24 hr, 7th day, 14th day, and one month of interval. These extracts were incubated with L929 cell line and 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay was done. Two-way ANOVA for interaction effects between sealer and time and Post-hoc multiple comparison using Tukey's test across all the 16 different groups were used for statistical analysis. Results: Apexit Plus root canal sealer was significantly less toxic than other sealers (p < 0.05) and showed higher cellular growth than control. Endomethasone N showed mild cytotoxicity. AH-26 showed severe toxicity which became mild after one month while Pulpdent Root Canal Sealer showed severe to moderate toxicity. Conclusions: Apexit Plus was relatively biocompatible sealer as compared to other three sealers which were cytotoxic at their initial stages, however, they became biocompatible with time.

• Animal Bioscience
• /
• 제35권8호
• /
• pp.1223-1234
• /
• 2022

Objective: The objectives of this study were to evaluate the effects of daily feed intake during the laying period on embryonic myogenic differentiation 1 (MYOD1), myogenic factor 5 (MYF5), and myogenic factor 6 (MYF6) gene expression in genetically fat and lean lines of chickens. Methods: An experiment in a 2×2 factorial design was conducted with two dietary intake levels (100% and 75% of nutrition recommendation) and two broiler chicken lines (fat and lean). Two lines of hens (n = 384 for each line) at 23th week of age were randomly divided into 4 treatments with 12 replicates of 16 birds. The experiment started at 27th week of age (5% egg rate) and ended at 54th week of age. Hatched eggs from the medium laying period were collected. Real time polymerase chain reaction analysis was used to analyse the MYOD1, MYF5, and MYF6 mRNA levels of E7, E9, E11, E13, and E15 body tissues and E17, E19, and E21 chest and thigh muscle samples. Results: The results indicated that there were significant effects of line, dietary intake, and interactions between them on MYOD1, MYF5, and MYF6 gene mRNA expression levels in embryonic tissues. Low daily feed intake did not change the expression trend of MYOD1 mRNA in either line, but changed the peak values, especially in lean line. Low daily feed intake altered the trend in MYF5 mRNA expression level in both lines and apparently delayed its onset. There was no apparent effect of low daily feed intake on the trends of MYF6 mRNA expression levels in either line, but it significantly changed the values on many embryonic days. Conclusion: Maternal nutrient restriction affects myogenesis and is manifested in the expression of embryonic MYOD1, MYF5, and MYF6 genes. Long term selection for fat deposition in broiler chickens changes the pattern and intensity of myogenesis.

• 자원환경지질
• /
• 제16권1호
• /
• pp.11-18
• /
• 1983

Gyeongsang Basin in the southeastern part of the Korean peninsular is characterized by many fault systems. To decipher the geotectonical evolution of the Korean peninsular and marginal basins in her adjacent areas it is prerequisite to understand the spatial distribution pattern and mutual relationships of these fault systems. Because of difficulties in finding any criterion to recognize the faults in field, their extension and mutual relationships in ages are not very clear yet. As an attempt to find geophysical criteria to recognize the fault, geoelectrical resistivity survey was carried out in this study. With the Wenner configuration four resistivity soundings and twenty seven resistivity profilings were done. The electrode distance used was up to 50m. From the results of the resistivity soundings and boring data of earlier groundwater investigations the depth of alluvial and weathered zone was established to be at most 20m in the study area. In the resistivity profiling low resistivity anomaly zones are detected on every traverse, which are interpreted as caused by fractures, fault clays and mylonites in the fault zone. The width of the fault zone amounts to 0.3-1km. By correlating and connecting the negative anomaly zones from traverse to traverse one can determine the trend of th of the faultzone and therefore that of fault itself. The recognized fault trend in this way was $N15^{\circ}-20^{\circ}E$ and this coincides with the direction of the inferred fault line from earlier geological surface mapping. With the help of this characteristical negative anomaly the existance of another $N80^{\circ}W$ trending fault was estabished. This study has shown that geoelectrical resistivity survey can be applied successfully to the problem of tracing fault line insofar as a fault zone has been developed along fault line.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.117-123
• /
• 2004

A 30 nm $In_{0.7}GaAs$ High Electron Mobility Transistor (HEMT) with triple-gate has been successfully fabricated using the $SiO_2/SiN_x$ sidewall process and BCB planarization. The sidewall gate process was used to obtain finer lines, and the width of the initial line could be lessened to half by this process. To fill the Schottky metal effectively to a narrow gate line after applying the developed sidewall process, the sputtered tungsten (W) metal was utilized instead of conventional e-beam evaporated metal. To reduce the parasitic capacitance through dielectric layers and the gate metal resistance ($R_g$), the etchedback BCB with a low dielectric constant was used as the supporting layer of a wide gate head, which also offered extremely low Rg of 1.7 Ohm for a total gate width ($W_g$) of 2x100m. The fabricated 30nm $In_{0.7}GaAs$ HEMTs showed $V_{th}$of -0.4V, $G_{m,max}$ of 1.7S/mm, and $f_T$ of 421GHz. These results indicate that InGaAs nano-HEMT with excellent device performance could be successfully fabricated through a reproducible and damage-free sidewall process without the aid of state-of-the-art lithography equipment. We also believe that the developed process will be directly applicable to the fabrication of deep sub-50nm InGaAs HEMTs if the initial line length can be reduced to below 50nm order.

• 암석학회지
• /
• 제10권3호
• /
• pp.179-189
• /
• 2001

전자현미분석 기를 이용한 저어콘 및 모나자이트의 화학적 연대측정은 미량의 U, Th 및 Pb의 정량분석을 통해 이루어지는데, 측정에 이용되는 M-line의 특성 X-선은 발생효율이 낮고 피크강도가 작아 측정하한과 오차범위가 고려된 분석조건이 설정 되어야한다. 총 분석시간을 줄이고, 측정조건의 변위에 따른 오차를 감소시키고자 PET결정을 갖춘 3개의 분광기를 이용하여 U, Th 및 Pb를 동시에 측정하였고, 파고분석기를 이용하여 피크/배경 비율을 증가시켜 측정하한을 낮추었다 최적 분석조건하에서 U, Th 및 Pb에 대한 이론적 값인 측정하한을 30 ppm (99%유의수준)까지 낮출 수 있었고. 저어콘의 단일측정 시 800 ppd의 Pb농도에서 $\pm$10% ($2{\sigma}$), 2330 ppm의 U에서 $\pm$5% ($2{\sigma}$) 그리고 측정된 연대에서 $\pm$10% ($2{\sigma}$)이내의 상대오차범위에서 분석결과를 얻었다. 저어콘 및 모나자이트의 연대측정을 수행하는데 있어, 3 $\mu\textrm{m}$ 이하의 공간분해능, 100 ppm ($3{\sigma}$) 이하의 측정하한과 $\pm$10% ($2{\sigma}$) 이하의 분석오차를 고려한 가속전압은 15~20 keV, 빔 전류는 100~200 nA, 그리고 총 측정시간을 300~l200초 (피크와 배경위치에서 각각 동일한 시간으로 측정)로 설정하여 보다 정밀하고 정확한 분석자료를 얻을 수 있었다. 높은 전류에 따른 시료의 손상을 줄이기 위해선 전자빔 직경을 3~5 $\mu\textrm{m}$로 증가시키거나 보다 짧은 시간동안의 측정을 반복하여 그 평균값을 이용하는 것이 필요하다. 빔 전류를 증가시키거나 분석시간을 늘려 측정하한을 낮추고 정밀도를 향상시킴으로서 보다 젊은 시기의 암석이나 상대적으로 U, Th 및 Pb의 함량이 적은 광물의 연대측정에 이용할 수 있다.

• 대한간호학회지
• /
• 제37권3호
• /
• pp.391-400
• /
• 2007

Purpose: The purpose of this study was to identify the nursing images appearing in elementary school textbooks. Method: This study targeted 130 textbooks of 13 subjects under the 7th national curriculum for elementary schools as of December 2005. Nursing-related texts, photographs, and illustrations in the textbooks were analyzed by using a content analysis method. As for the textbook analysis, two coders thoroughly read the textbooks to record nursing-related content per coding paper, respectively. Result: The total number of nursing-related content appearing in 130 textbooks of 13 subjects was 70. More nursing-related content was exhibited in the photograph and illustration domain(N=57, 81.4%) than in the text domain(N=13, 18.6%). Nursing-related content(N=70) appeared in the order of nursing activities with 56(80.0%), nursing as a job with 10(14.3%), and others with 4(5.7%). As for the nursing image of nursing-related content, positive images weremost with 30(42.9%), followed by negative images with 21(30.0%), and neutral images with 19(27.1%). Conclusion: Nursing-related content was dealt with too little, and dependent nursing activities such as medication, and assisting roles for doctor's examinations and treatments mainly appeared. Also, the main activity place was a hospital. To introduce proper and adequate nursing activities to the students, various types of nursing-related data and material should be distributed to front line schools, teachers, main authors, and publishing companies.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.86-94
• /
• 2000

This study was performed to investigate types and formation mechanism of cracks in two Al alloy welds, A5083 and A7N01 spot-welded by pulse Nd : YAG laser, using SEM, EPMA and Micro-XRD. In the weld zone, three types of crack were observed : center line crack({TEX}$C_{C}${/TEX}), diagonal crack({TEX}$C_{D}${/TEX}), and U shape crack({TEX}$C_{U}${/TEX}). Also, HAZ crack({TEX}$C_{H}${/TEX}) was observed in the HAZ region, furthermore, mixing crack({TEX}$C_{M}${/TEX}) consisting of diagonal crack and HAZ crack was observed. White film was formed at th hot crack region in the fractured surface after it was immersed to 10% NaOH water. In the case of A5083 alloy, white films in {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack region were composed of low melting phases, {TEX}$Fe_{2}SiAl_{8}${/TEX} and eutectic phases, $Mg_2$Al$_3$ and $Mg_2$Si. Such films observed $CuAl_2$, {TEX}$Mg_{32}(Al,Zn)_{3}${/TEX}, MgZn$_2$, $Al_2$CuMg and $Mg_2$Si were observed in the whitely etched films near {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack regions. The formation of liquid films was due to the segregation of Mg, Si, Fe in the case of A5083 alloy and Zn, Mg, Cu, Sim in the case of A7N01 alloy, respectively. The {TEX}$C_{C}${/TEX} and {TEX}$C_{D}${/TEX} cracks were regarded as a result of the occurrence of tensile strain during the welding process. The formation of {TEX}$C_{M}${/TEX} crack is likely to be due to the presence of liquid film at the grain boundary near the fusion line in the base metal as well as in the weld fusion zone during solidification. The {TEX}$C_{U}${/TEX} crack is considered a result of the collapsed keyhole through incomplete closure during rapid solidification.

• 한국초등과학교육학회지:초등과학교육
• /
• 제26권4호
• /
• pp.440-448
• /
• 2007

The purpose of this study is to examine elementary students' conceptions of magnetic fields around various magnets by drawing tasks. A total of 105 elementary students from the 3rd and 6th grade levels were asked to draw how iron filings would arrange around magnets. We classified their drawings of magnetic field lines with some criteria to identify conceptions of magnetic forces and checked them through interviewing about their representative drawing. Through analyzing drawings, we discovered that 40% of elementary students drew the correct arrangement of iron filings around a bar magnet. In the case of two bar magnets in opposite directions, 33% of them drew correct patterns of iron dust and around two magnets in the same direction only 20% did well. Only 2.9% and 7.6% of students presented the correct drawings of magnetic fields near a disc and a horseshoe magnet. While 3rd grade students were supposed to be poor in drawings of magnetic fields around a loose and a dense coil which was not learned about, only 31% and 23% of 6th grade students who have just studied electromagnetism properly drew patterns of iron dust. This shows that only one quarter of students understood the magnetic filed lines even after instruction of electromagnetism. Many of 6th grade students learned a solenoid becomes just as a permanent magnet, but very few of them correctly drew a magnetic field line could distinguish between the iron dust around a loose and dense coil. After interviewing students, it is found that students consider magnetic forces to be existed only in parts of magnet because many of them drew magnetic field line of a specific areas around magnets. Students had misconceptions that magnetic forces exist only on the poles not in the middle around a horseshoe magnet. Also the disc-shape magnet made students to reveal various types of misconceptions: N- and S-poles are mixed in a whole magnet and right part of a disc-shape magnet is N-pole, left part is S-pole. Students who had not studied magnetic fields of around a magnet and electromagnets could not draw the correct patterns of iron dust suggest that it is indispensable for students to teach how patterns of iron filings would represent a visual image of magnetic fields in order to understand magnetic fields.