• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.467-468
• /
• 2006

In this work, we present the comparison between $d_{31}\;and\;d_{33}$ mode characterization using the PZT micro-actuator for large displacement. The PZT micro-actuator consisted of Si, PZT, and Pt layer on SOI wafer. The electrode shapes were laminated and interdigitated for $d_{31}\;and\;d_{33}$ mode, respectively. In order to characterize the actuation mode, we measured the displacement using laser interferometer. The maximum displacement of d31 mode was $12.2{\mu}m$ at 10V, the actuation characterization of d31 was better than that of d33 mode. We estimated that displacement of d33 mode would be larger than that of d31 above 30V.

• 한국음향학회지
• /
• 제38권2호
• /
• pp.184-192
• /
• 2019

33-모드 링은 31-모드 링에 비하여 결합상수와 압전상수 d가 높기 때문에 광대역 수중 음향 트랜스듀서로 활용성이 높다. 반면 31-모드 링은 축대칭 구조이므로 수치해석 수행시 2차원 축대칭 모델로 간략히 해석이 가능하지만, 33-모드 링은 3차원 수치해석을 수행해야 한다. 즉, 특성 예측을 위해 많은 전산자원과 계산시간이 소요된다. 따라서 33-모드 링의 전기-기계-음향 응답을 모사할 수 있는 등가의 31-모드 링의 유효 물성을 도출할 수 있다면 소나 트랜스듀서 설계 등에 실용적일 것이다. 본 연구에서는 응답 특성을 모사하기 위해 각 링의 전기, 기계 임피던스 및 변환계수(${\phi}$)가 동일하다고 가정하여 등가 31-모드 링의 유효 밀도(${\rho}_{31_{-}eff}$), 컴플라이언스($s^E_{11_{-}eff}$), 압전 상수($d_{31_{-}eff}$), 유전 상수(${\varepsilon}^T_{33_{-}eff}$)를 유도했다. 도출한 유효 물성을 이용하여 진공상태의 링, 수중에서 공기 배킹의 링, 그리고 수중에서 링 내부에 자유롭게 유체가 드나드는 링에 대하여 수치해석을 하였고 이를 33-모드 링의 응답특성과 비교하였다.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.43-49
• /
• 2004

본 논문에서는 슈퍼하이델타(Super High Delta) 실리카 광도파로와 단일 모드 광섬유 사이의 결합손실을 줄이기 위한 모드 크기 변환기를 설계하였다. 새로운 모드 크기 변환기는 물리적 크기를 최소화하기 위해 주기적으로 분리된 테이퍼 도파로를 사용하였으며 공정을 간단히 하기 위해 수평형 테이퍼를 사용하였다. 또한 결합손실을 개선하기 위해 모드 크기 변환기 주변에 트렌치 구조를 삽입하였다. 최적의 모드 크기 변환기 설계에서 결합손실은 트렌치 구조가 삽입되지 않은 경우는 0.33dB/point 이며 트렌치가 삽입된 경우는 0.2dB/point이다.

• 전자공학회논문지C
• /
• 제34C권6호
• /
• pp.58-70
• /
• 1997

In this paper, an 8bit CMOS low power, high-speed current-mode folding and interpolation A/D converter is designed with te LG semicon $0.8\mu\textrm{m}$ N-well single-poly/double-metal CMOS process to be integrated into a portable image signal processing system such as a digital camcoder. For good linearity and low power consumption, folding amplifiers and for high speed performance of the A/D converter, analog circuitries including folding block, current-mode interpolation circuit and current comparator are designed as a differential-mode. The fabricated 8 bit A/D converter occupies the active chip area of TEX>$2.2mm \times 1.6mm$ and shows DNL of $\pm0.2LSB$, INL of <$\pm0.5LSB$, conversion rate of 40M samples/s, and the measured maximum power dissipation of 33.6mW at single +5V supply voltage.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.959-965
• /
• 2019

본 논문에서는 CMOS 65-nm 공정을 이용하여 위성 통신 시스템에서 Ka-band를 지원하기 위한 저잡음 증폭기를 설계하였다. 제안된 저잡음 증폭기는 고이득 모드와 저이득 모드로 구성되어있으며, 입력신호의 크기에 따라 이득을 제어하도록 설계하였다. 전력소모를 줄이기 위해 회로 전체의 공급전압을 1 V 이하로 제한하였으며, 인버터 구조의 이득제어 회로에 대해 기술하였다. 제작된 회로의 크기를 줄이기 위해 3D EM 시뮬레이터를 사용하였으며, 패드를 포함하며 $0.33mm^2$의 면적을 갖는다. 제작된 증폭기는 3 dB 대역폭에서 -7 dB의 이득제어 범위를 가지며 반사계수는 고이득 모드에서 -6 dB, 저이득 모드에서 -15 dB 미만으로 측정되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.925-931
• /
• 2009

This paper reports a preliminary experimental investigation and characterization of an optical fiber-based submersion sensor system for applications in water flooding and leakage. The sensor system comprises a multi-mode fiber spliced with fiber Bragg grating and an intensity-based interrogator. Submersion tests were conducted in water-air and Glycerin-air environments. By the refractive index of the fiber-probe surrounding materials, the reflectance and the detecting power level is determined. When the probe is dipped into the water, the optical output power dramatically decreases from -7.5dBm to -17.5dBm. But, the center of Bragg wavelength is not affected in spite of external material changes. Temporal response characteristics of the sensor system is investigated to verify the real-time reaction. When the probe is immersed into the liquid, there is no transition time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.357-360
• /
• 2003

In this paper, we investigated the characteristics of 4${\times}$4 thermo-optic switch using two mode interference(TMI) coupler. We designed this matrix switch by using a configuration which combines a double Mach- Zehnder interferometer(MZI) switching unit. The average extinction ratio and average excess loss of the 4${\times}$4 thermo-optic switch was 33.7dB, 0.29dB, respectively.

• ETRI Journal
• /
• 제19권2호
• /
• pp.35-47
• /
• 1997

A power amplifier operating at 3.3 V has been developed for CDMA/AMPS dual-mode cellular phones. It consists of linear GaAs power MESFET's, a new gate bias control circuit, and an output matching circuit which prevents the drain terminal of the second MESF from generating the harmonics. The relationship between the intermodulation distortion and the spectral regrowth of the power amplifier has been investigated with gate bias by using the two-tone test method and the adjacent channel leakage power ratio (ACPR) method of CDMA signals. The dissipation power of the power amplifier with a gate bias control circuit is minimized to below 1000 mW in the range of the low power levels while satisfying the ACPR of less than -26 dBc for CDMA mode. The ACPR of the power amplifier is measured to be -33 dBc at a high output power of 26 dBm.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.29-33
• /
• 2017

This paper proposes a half-mode substrate integrated waveguide (HMSIW) amplifier using lumped-element transition. The input and output impedances of this amplifier are matched by the lumped-element transition structure. This structure provides compact impedance and mode matching circuits between the HMSIW and a stand-alone amplifier. Surface mount technology inductors and capacitors are implemented to realize the lumped-element transition. A prototype of the proposed HMSIW amplifier shows 15 dB gain with 3 dB bandwidth of 4 to 7.05 GHz in a simulation and measurement.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.747-763
• /
• 2009

In this work, the linear vibration characteristics of $90^{\circ}$ pipe bends and their cylindrical and toroidal shell components are studied. The finite element method, based on shear-deformation shell elements, is used to carry out a vibration analysis of metallic multiple $90^{\circ}$ mitred pipe bends. Single, double, and triple mitred bends are considered, as well as a smooth bend. Sample natural frequencies and mode shapes are given. To validate the procedure, comparison of the natural frequencies is made with existing results for cylindrical and toroidal shells. The influence of the multiplicity of the bend, the boundary conditions, and the various geometric parameters on the natural frequency is described. The differential quadrature method, based on classical shell theory, is used to study the vibration of components of these bends. Regression formulas are derived for cylindrical shells (straight pipes) with one or two oblique edges, and for sectorial toroidal shells (curved pipes, pipe elbows). Two types of support are considered for each case. The results given provide information about the vibration characteristics of pipe bends over a wide range of the geometric parameters.