• Title/Summary/Keyword: $c_a/c_c$

검색결과 122,311건 처리시간 0.117초

Effect of Compositional Parameters on the Characteristics of C-SiC-$B_4C$ Composites

  • Aggarwal, R.K.;Bhatia, G.B.;Saha, M.;Mishra, A.
    • Carbon letters
    • /
    • 제5권4호
    • /
    • pp.164-169
    • /
    • 2004
  • Carbon-ceramic composites refer to a special class of carbon based materials which cover the main drawbacks of carbon, particularly its proneness to air oxidation, while essentially retaining its outstanding properties. In the present paper, the authors report the results of a systematic study made towards the development of C-SiC-$B_4C$ composites, which involves the effects of compositional parameters, namely, carbon-to-ceramic and ceramic-to-ceramic ratios, on the oxidation behaviour as well as other characteristics of these composites. The C-SiC-$B_4C$ composites, heat-treated to $1400^{\circ}C$, have shown that their oxidation behaviour at temperatures of 800~$1200^{\circ}C$ depends jointly on the total ceramic content and the SiC : $B_4C$ ratio. Good compositions of C-SiC-$B_4C$ composites exhibiting zero weight loss in air at temperatures of 800~$1200^{\circ}C$ for periods of 4~9 h, have been identified. Composites with these compositions undergo a weight gain or a maximum weight loss of less than 3% during the establishment of a protective layer at the surface of carbon in a period of 1~6 h. Significant improvement in the strength of C-SiC-$B_4C$ composites has been observed which increases with an increase in the total ceramic content and also with an increase in the SiC : $B_4C$ ratio.

  • PDF

CYP2E1 RsaI/PstI Polymorphism and Liver Cancer Risk among East Asians: a Huge Review and Meta-analysis

  • Tian, Zhong;Li, Yi-Ling;Zhao, Lin;Zhang, Chen-Liang
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권10호
    • /
    • pp.4915-4921
    • /
    • 2012
  • Published data on any association between the CYP2E1 RsaI/PstI (c1/c2) polymorphism and liver cancer risk among east Asians are inconclusive. The aim of this Human Genome Epidemiology (HuGE) review and meta-analysis was to derive a more precise estimation of the relationship. A literature search of Pubmed, Embase, Web of science and CBM databases from inception through July 2012 was conducted. Twelve case-control studies were included with a total of 1,552 liver cancer cases and 1,763 healthy controls. Crude odds ratios (ORs) with 95% confidence intervals (CIs) were used to assess the strength of association under five genetic models. When all the eligible studies were pooled into the meta-analysis, the results showed that the c2 allele and the c2 carrier (c2/c2 + c2/c1) of RsaI/PstI polymorphism were associated with decreased risk of liver cancer among east Asians (c2 vs. c1: OR = 0.75, 95%CI: 0.59-0.95, P = 0.016; c2/c2 + c2/c1 vs. c1/c1: OR = 0.76, 95%CI: 0.58-1.00, P = 0.050). In the stratified analysis by country, significant associations were observed between RsaI/PstI polymorphism and decreased risk of liver cancer among the Chinese population (c2 vs. c1: OR = 0.70, 95%CI: 0.54-0.91, P = 0.007; c2/c2 + c2/c1 vs. c1/c1: OR = 0.72, 95%CI: 0.54-0.95, P = 0.020), but not among Japanese and Korean populations. Results from the current meta-analysis indicates that the c2 allele of CYP2E1 RsaI/PstI (c1/c2) polymorphism may be a protective factor for HCC among east Asians, especially among China populations.

용융전로(熔融轉爐)슬래그와 $C_3A(3CaO{\cdot}Al_2O_3)$ 펠렛사이의 계면반응(界面反應) (The Interface Reaction Between Molten Converter Slag and $C_3A(3CaO{\cdot}Al_2O_3)$ Pellet)

  • 김영환;고인용
    • 자원리싸이클링
    • /
    • 제14권5호
    • /
    • pp.13-17
    • /
    • 2005
  • 용융전로슬래그를 일반 포틀랜드 시멘트로 활용하기 위하여, 용융슬래그와 $C_3A(3CaO{\cdot}Al_2O_3)$가 반응하여 시멘트의 구성상인 $C_4AF$가 생성되는 기구와 생성속도를 조사하고자 한다. 전로슬래그에 소정의 $SiO_2$를 첨가하여 MgO도가니에 넣고 $1300^{\circ}C{\sim}1350^{\circ}C$에서 30분간 가열 용해하여 균질화 한 후, 같은 온도로 가열해 둔 소결 $C_3A$펠렛을 투입하여 $10{\sim}30$분간 반응시켰다. 반응 후, 급냉한 시편을 도가니의 직경방향으로 절단해서 펠렛 단면의 $C_3A$직경 변화를 측정하여 $C_3A$의 용해속도를 조사하고, 계면반응 생성상을 SEM/EDX로 관찰하였다. 그 결과 $C_3A$ 펠렛의 슬래그로의 용해속도는 $1300^{\circ}C$에서 $0.75{\times}10^{-4}(cm/sec)$으로부터 $1350^{\circ}C$에서 $1.67{\times}10^{-4}(cm/sec)$으로 증가하였으며, 슬래그와 $C_3A$ 펠렛 사이에 $C_4AF$$C_{12}A_7$의 혼합층이 생성됨을 알 수 있었다.

ON THE STABILITY OF A FIXED POINT ALGEBRA C*(E)γ OF A GAUGE ACTION ON A GRAPH C*-ALGEBRA

  • Jeong, Ja-A.
    • 대한수학회지
    • /
    • 제46권3호
    • /
    • pp.657-673
    • /
    • 2009
  • The fixed point algebra $C^*(E)^{\gamma}$ of a gauge action $\gamma$ on a graph $C^*$-algebra $C^*(E)$ and its AF subalgebras $C^*(E)^{\gamma}_{\upsilon}$ associated to each vertex v do play an important role for the study of dynamical properties of $C^*(E)$. In this paper, we consider the stability of $C^*(E)^{\gamma}$ (an AF algebra is either stable or equipped with a (nonzero bounded) trace). It is known that $C^*(E)^{\gamma}$ is stably isomorphic to a graph $C^*$-algebra $C^*(E_{\mathbb{Z}}\;{\times}\;E)$ which we observe being stable. We first give an explicit isomorphism from $C^*(E)^{\gamma}$ to a full hereditary $C^*$-subalgebra of $C^*(E_{\mathbb{N}}\;{\times}\;E)({\subset}\;C^*(E_{\mathbb{Z}}\;{\times}\;E))$ and then show that $C^*(E_{\mathbb{N}}\;{\times}\;E)$ is stable whenever $C^*(E)^{\gamma}$ is so. Thus $C^*(E)^{\gamma}$ cannot be stable if $C^*(E_{\mathbb{N}}\;{\times}\;E)$ admits a trace. It is shown that this is the case if the vertex matrix of E has an eigenvector with an eigenvalue $\lambda$ > 1. The AF algebras $C^*(E)^{\gamma}_{\upsilon}$ are shown to be nonstable whenever E is irreducible. Several examples are discussed.

Sol-gel 법으로 합성된 SiC-C 복합분말을 사용하여 제조된 Si-SiC의 기계적 특성 및 전기저항 특성 (Mechanical and Electrical Properties of Si-SiC Fabricated Using SiC-C Composite Powders Synthesized by Sol-gel Process)

  • 윤성일;조경선;염미래;임대순;박상환
    • 한국세라믹학회지
    • /
    • 제51권5호
    • /
    • pp.459-465
    • /
    • 2014
  • In this study, Si-SiC composites were fabricated using a Si melt infiltration method using ${\beta}$-SiC/C composite powders synthesized by the carbothermal reduction of $SiO_2-C$ precursors made from a TEOS and a phenol resin. The purity of the synthesized SiC-C composite powders was higher than 99.9993 wt% and the average particle size varied from 4 to $6{\mu}m$ with increasing carbon contents of the $SiO_2-C$ precursors. It was found that the Si-SiC composites fabricated in this study consist of ${\beta}$-SiC and residual Si, without any trace of ${\alpha}$-SiC. The 3-point bending strengths of the fabricated Si-SiC composites were measured and found to be higher than 550 MPa, although the density of the fabricated Si-SiC composite was less than $2.9g/cm^3$. The bending strengths and the densities of the fabricated Si-SiC composites were found to decrease with increasing C/Si mole ratios in the SiC-C composite powders. The specific resistivities of the Si-SiC composites fabricated using the SiC-C composite powders were less than $0.018{\Omega}cm$. With increasing C content in the SiC-C composite powders used for the fabrication of Si-SiC composites, the specific resistivity of the Si-SiC composites was found to slightly increase from 0.0157 to $0.018{\Omega}cm$.

SiC(3C)/Si 수광소자 (SiC(3C)/Si Photodetector)

  • 박국상;남기석;김정윤
    • 한국결정성장학회지
    • /
    • 제9권2호
    • /
    • pp.212-216
    • /
    • 1999
  • SiC(3C) 광다이오드는 p-형 Si 위에 tetramethylsilane (TMS)를 열분해아여 화학기상증착법으로 성장된 SiC(3C) 에피층을 성장하여 제작되었다. SiC(3C)의 전기적 특성은 홀 측정(Hall measurement) 및 전류-전압(I-V) 특성으로 조사되었다. SiC(3C) 에피층의 전도형은 n-형이었다. 저항성 접촉은 마스크 (shadow-mask)를 통해서 Al을 열증착하여 형성하였다. SiC(3C)광다이오드의 광학적 이득(photovoltaic detection)를 해석하기 위하여 SiC(3C) 에피층의 Spectral response (SR)를 전기적 변수(electrical parameter) 및 광다이오드의 기하학적 구조(geometric structure)를 고려하여 계산하였다. 적절히 선정된 변수들로부터 계산된 SR의 최대값은 550 nm에서 약 0.75이었고, 파장영역 400~600 nm 사이에서 청색 및 근자외선 광검지기로서 매우 유용하다.

  • PDF

FCXO ; A Fuzzy Compensated Crystal Oscillator

  • de los Mozos, Mario Reyesr;Valderrama, Elena;Arguelles, Javier
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.842-844
    • /
    • 1993
  • We present a F.L.C. (Fuzzy Logic Controller) to control of the oscillation frequency of a V.C.X.O. (Voltage Controled Crystal Oscillator). This F.C.X.O. maintains stable its oscillation frequency inside a range of 1 ppm (one part per millon), with temperature between -55$^{\circ}C$ to+75$^{\circ}C$.

  • PDF

Electron transport in core-shell type fullerene nanojunction

  • Sergeyev, Daulet;Duisenova, Ainur
    • Advances in nano research
    • /
    • 제12권1호
    • /
    • pp.25-35
    • /
    • 2022
  • Within the framework of the density functional theory combined with the method of non-equilibrium Green's functions (DFT + NEGF), the features of electron transport in fullerene nanojunctions, which are «core-shell» nanoobjects made of a combination of fullerenes of different diameters C20, C80, C180, placed between gold electrodes (in a nanogap), are studied. Their transmission spectra, the density of state, current-voltage characteristics and differential conductivity are determined. It was shown that in the energy range of -0.45-0.45 eV in the transmission spectrum of the "Au-C180-Au" nanojunction appears a HOMO-LUMO gap with a width of 0.9 eV; when small-sized fullerenes C20, C80 are intercalation into the cavity C180 the gap disappears, and a series of resonant structures are observed on their spectra. It has been established that distinct Coulomb steps appear on the current-voltage characteristics of the "Au-C180-Au" nanojunction, but on the current-voltage characteristics "Au-C80@C180-Au", "Au-(C20@C80)@C180-Au" these step structures are blurred due to a decrease in Coulomb energy. An increase in the number of Coulomb features on the dI/dV spectra of core-shell fullerene nanojunctions was revealed in comparison with nanojunctions based on fullerene C60, which makes it possible to create high-speed single-electron devices on their basis. Models of single-electron transistors (SET) based on fullerene nanojunctions "Au-C180-Au", "Au-C80@C180-Au" and "Au-(C20@C80)@C180-Au" are considered. Their charge stability diagrams are analyzed and it is shown that SET based on C80@C180-, (C20@C80)@C180- nanojunctions is output from the Coulomb blockade mode with the lowest drain-to-source voltage.

Characterizations of some real hypersurfaces in a complex space form in terms of lie derivative

  • Ki, U-Hang;Suh, Young-Jin
    • 대한수학회지
    • /
    • 제32권2호
    • /
    • pp.161-170
    • /
    • 1995
  • A complex $n(\geq 2)$-dimensional Kaehlerian manifold of constant holomorphic sectional curvature c is called a complex space form, which is denoted by $M_n(c)$. A complete and simply connected complex space form is a complex projective space $P_nC$, a complex Euclidean space $C^n$ or a complex hyperbolic space $H_nC$, according as c > 0, c = 0 or c < 0. Takagi [12] and Berndt [2] classified all homogeneous real hypersufaces of $P_nC$ and $H_nC$.

  • PDF

EDI 방식과 XML 방식간 통합관리를 통한 전자신용장의 활성화 방안에 관한 연구 (A Study on the Integrated Management of XML and EDI Electronic Letters of Credit)

  • 장상식;안병수
    • 무역상무연구
    • /
    • 제58권
    • /
    • pp.237-263
    • /
    • 2013
  • Traditionally, a L/C (letter of credit) has been known as a relatively low risk method of payment. This is why L/C has been used in international trade. However, L/C has a number of weak points such as high cost, long processing time, and complicated documents. Using an electronic L/C is one way to solve those weak points. In Korea, there are two types of electronic L/C. One is the EDI (Electronic Data Interchange) based L/C and the other one is the XML (Extensible Markup Language) based L/C. The former, established in 1990's, is sent from banks to the beneficiary solely through VAN (Value Added Network, KTNET) operators. On the other hand the latter, started in 2005, is sent from banks to KFTC (Korea Financial Telecommunications & Clearings Institute) for management of the L/C balance, as well as to KTNET. So far, paper L/C and EDI based L/C have been used overwhelmingly instead of XML based L/C in spite of the aforesaid disadvantages. In this paper, the authors examined empirically why the users of electronic L/C were reluctant to use XML based L/C. The results are as follows. First, the users of paper L/C were more dissatisfied than the users of electronic L/C due to many factors such as cost, the time required, and information reuse. Second, the users who have more experience with XML based L/C wanted to adopt integrated management with EDI based L/C more than the users who had not experienced XML based L/C. Third, the users who had used more than one form of L/C wanted to adopt integrated management to EDI and XML based L/C more than the users who had only used one form of L/C. Therefore, the authority for electronic L/C should consider a change of the policy from the XML based electronic L/C oriented to integrated management of the various types of L/C.

  • PDF