• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.9-13
• /
• 2003

Cuticular hydrocarbons of antenna, legs and wings from two species of honeybee worker of Apis mellifera L. and Apis cerana F. can be analyzed directly with gas chromatograph and GC/MS without solvent extraction. The saturated hydrocarbons identified in selected part of both species were nC22, nC23, nC25-nC3O, nC32 and nC34 except nC24. Two saturated hydrocarbons, nC26 (23.0-42.6%) and nC28 (16.8-54.8%), were major compounds in both species and others were minor compounds. A. mellifera can be distinguished from A. cerana F. by having higher proportion of nC30, nC32 and nC34 by having lower proportion of nC25 from three selected part of both species.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.91-91
• /
• 2000

a-C:H 혹은 a-SiC:H 박막은 광전소자 및 태양전지 등의 개발에 있어서 중요한 물질이다. 우리는 a-C:H 및 a-SiC:H 박막을 PECVD (plasma-enhanced chemical vapor deposition) 방법으로 증착시키고, 박막의 가열에 따른 스핀밀도의 변화를 ESR (electron spin resonance) 측정을 통하여 조사하였다. PECVD 증착가스는 Ch4, SiH4 가스를 사용하였고, 기판은 Corning 1737glass를 사용하였으며, 기판 온도는 300-40$0^{\circ}C$, 증착 압력은 0.1-0.3 Torr, r.f. 전력은 3-36W 사이에서 변화되었다. ESR 측정은 상온 X-band 영역에서 수행되었고, modulation amplitude는 2.5G, modulation frequency는 100kHz 이었다. a-C:H 혹은 a-SiC:H 박막은 진공상태의 reactor, 혹은 공기중의 furnace 안에서 300-50$0^{\circ}C$ 영역에서 3-8시간 정도 가열되거나, 혹은 상온에서 약 50$0^{\circ}C$ 정도까지 단계적으로 가열되었다. 증착된 a-C:H 박막의 초기 구조는 Raman 측정으로부터 polymer-like Carbon으로 추정되었으며, 300-35$0^{\circ}C$ 가열시 초기 1시간 정도 사이에는 스핀밀도가 증가되었으나, 그 후 8시간 정도까지의 가열의 경우에도 대체로 동일하게 나타났다. 또한 상온으로부터 약 50$0^{\circ}C$까지 단계적으로 온도를 높여주며, 각 단계마다 1시간씩 가열했을 때도 30$0^{\circ}C$ 정도까지는 스핀밀도가 증가하다가 더 높은 온도로 가면서 다시 스핀밀도가 감소함을 볼 수 있었다. 이러한 스핀밀도의 초기 증가 및 감소를 일으키는 메카니즘에 대해서 논의해 볼 것이다.

• Journal of Sensor Science and Technology
• /
• v.16 no.3
• /
• pp.197-201
• /
• 2007

The magnetron reactive ion etching (RIE) characteristics of polycrystalline (poly) 3C-SiC grown on $SiO_{2}$/Si substrate by APCVD were investigated. Poly 3C-SiC was etched by $CHF_{3}$ gas, which can form a polymer as a function of side wall protective layers, with additive $O_{2}$ and Ar gases. Especially, it was performed in magnetron RIE, which can etch SiC at a lower ion energy than a commercial RIE system. Stable etching was achieved at 70 W and the poly 3C-SiC was undamaged. The etch rate could be controlled from $20\;{\AA}/min$ to $400\;{\AA}/min$ by the manipulation of gas flow rates, chamber pressure, RF power, and electrode gap. The best vertical structure was improved by the addition of 40 % $O_{2}$ and 16 % Ar with the $CHF_{3}$ reactive gas. Therefore, poly 3C-SiC etched by magnetron RIE can expect to be applied to M/NEMS applications.

• Korean Journal Plant Pathology
• /
• v.14 no.3
• /
• pp.240-246
• /
• 1998

A cDNA encoding desiccation-related protein was isolated from a flower bud cDNA library of Chinese cabbage (C-DH) and its nucleotide sequence was characterized. It contains 679 bp nucleotides with 501 bp open reading frame. The amino acid sequence of the putative protein showed the highest amino acid sequence homology (79 % identity) to dehydrin protein in Gossypium hirsutum. Also, the C-DH shares 48-52% amino acid sequence identity with the other typical dehydrin proteins in plant cells. When the amino acid sequence of their proteins were aligned, several peptide motifs were well conserved, of which function has to be solved. Particularly the C-DH contains 15 additional amino acids at its N-terminus. Genomic Southern blot analysis using the coding region of C-DH showed that the C-DH consists of a single copy gene in Chinese cabbage genome. The C-DH mRNA, whose transcript size is 0.7 kb, was expressed with a tissue-specific manner. It was highly expressed in seed, flower buds and low expression as detected in root, stem or leaf tissues of Chinese cabbage. And the transcript level of C-DH was significantly induced by the treatment of plant hormone, abscisic acid and water-deficit conditions.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.149-155
• /
• 2017

Mechanical properties of carbon coated $SiC_f/SiC$ composites have been investigated, in conjunction with a detailed analysis of microstructure. Especially, the fracture behavior of $SiC_f/SiC$ composites by the induction of carbon coating layers has been examined. The matrix region of $SiC_f/SiC$ composites with ultra-fine SiC powders were consolidated by a liquid phase sintering (LPS) process, using a sintering additive of $Al_2O_3-Y_2O_3$ powder compound. In this composite, plain and satin- woven Tyranno SA fabrics were also utilized as a reinforcing material. A carbon interfacial layer was coated around satin-woven SiC fabrics. The characterization of LPS-$SiC_f/SiC$ composites was investigated by means of SEM and three point bending test.

• Journal of the Korean Society of Costume
• /
• v.54 no.5
• /
• pp.71-81
• /
• 2004

The purpose of this study was to investigate the customer service factors and evaluation of consumer satisfaction on the purchase through the C2C E- commerce, focusing on the fashion goods. 190 college students who have purchased products via C2C E-commerce were surveyed. For data analysis, descriptive statistics, 1-test, Pearson＇s correlations, and multiple regression were used. As the results, 50.5% of respondents have purchased fashion products through C2C. Out of 4 C2C characteristics factors. there was statistically the significant difference in only ＇entertainment factor＇ between males and females. All five SERVQUAL＇s factors used for measuring service factors in this study were correlated to customer satisfactions scores. Also. results of multiple regression revealed that assurance, empathy, and reliability were significantly to related to customer satisfaction. Based on these results, fashion marketing strategy for C2C development would be suggested.

• Journal of Sensor Science and Technology
• /
• v.18 no.3
• /
• pp.207-209
• /
• 2009

This paper describes the characteristics of poly 3C-SiC micro resonators with $3{\times}10^{17}{\sim}1{\times}10^{19}cm^{-3}$ doping concentrations. The 1.2 ${\mu}m$ thick cantilever and the 0.4 ${\mu}m$ thick doubly clamped beam resonators with different lengths were fabricated using poly 3C-SiC thin films. The characteristics of poly 3C-SiC micro resonators were evaluated by quartz and a laser vibrometer in vacuum at room temperature. The resonant frequencies of micro resonators decreased with doping concentrations owing to reduction in the Young's modulus of poly 3C-SiC thin films. It was confirmed that the resonant frequencies of poly 3C-SiC resonators are controllable by doping concentrations. Therefore, poly 3C-SiC resonators could be applied to MEMS devices and bio/chemical sensor applications.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.204-207
• /
• 2008

This paper presents a new process for producing SiC fiber-SiC matrix(SiC/SiC) composites by reaction sintering. The processing strategy for the fabrication of the SiC/SiC composites involves the following: (1) infiltration of the SiC fiber fabric using a slurry consisting of Si and C precursors, (2) stacking the slurry-infiltrated SiC fiber fabric at room temperature, (3) cross-linking the stacked composites, (4) pyrolysis of the stacked composites, and (5) hot-pressing of the pyrolyzed composites. It was possible to obtain dense SiC/SiC composites with relative densities of >96% and a typical flexural strength of ${\sim}400$ MPa.

• Communications of the Korean Mathematical Society
• /
• v.9 no.2
• /
• pp.369-383
• /
• 1994

A complex n-dimensional Kahler manifold of constant holomorphic sectional curvature c is called a complex space form, which is denoted by $M_{n}$ (c). A complete and simply connected complex space form consists of a complex projective space $P_{n}$ C, a complex Euclidean space $C^{n}$ or a complex hyperbolic space $H_{n}$ C, according as c > 0, c = 0 or c < 0.(omitted)

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.125-129
• /
• 1982

Four peroxidase isozymes from horseradish roots (isozymes A, B, C and D) were isolated by chromatography and were thermally inactivated at $70{\sim}97^{\circ}C$ and pH 7.0. The four isozymes had different inactivation rates and the inactivation of each isozymes did not follow first order kinetics. D values of isozymes A, B, C, D and crude enzyme were 594s, 1850s, 2050s, 78s, 130s and z values were $24.0^{\circ}C$, $12.5^{\circ}C$, $18.0^{\circ}C$, $23.7^{\circ}C$ and $24.0^{\circ}C$, respectively. Sephadex gel chromatogram of the thermally treated isozyme C indicated that the shape and molecular weight of the native isozyme changed during inactivation.