• Transactions on Electrical and Electronic Materials
• /
• 제16권1호
• /
• pp.1-4
• /
• 2015

(111)-oriented and random oriented $Pb_{0.8}Ba_{0.2}ZrO_3$ (PBZ) perovskite relaxor ferroelectric thin films were fabricated on Pt(111)/$TiO_x$/$SiO_2$/Si substrate by sol-gel method. Nano-scaled antiferroelectric and ferroelectric two-phase coexisted in both (111)-oriented and random oriented PBZ thin film. High dielectric tunability (${\eta}=75%$, E = 560 kV/cm) and figure-of-merit (FOM ~ 236) at room temperature was obtained in (111)-oriented thin film. Meanwhile, giant electrocaloric effect (ECE) (${\Delta}T=45.3K$ and ${\Delta}S=46.9JK^{-1}kg^{-1}$ at $598kVcm^{-1}$) at room temperature (290 K), rather than at its Curie temperature (408 K), was observed in random oriented $Pb_{0.8}Ba_{0.2}ZrO_3$ (PBZ) thin film, which makes it a promising material for the application to cooling systems near room temperature. The giant ECE as well as high dielectric tunability are attributed to the coexistence of AFE and FE phases and field-induced nano-scaled AFE to FE phase transition.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.538-544
• /
• 1998

열차폐코팅층의 박리는 세라믹/금속접합층 계면에서 취성이 큰 스피텔의 생성, 금속과 세라믹의 열팽창계수의 차이, 세라믹층의 상변태, 코팅층의 잔류응력에 기인한다. 본 연구에서는 인코넬 713C에 전자빔 코팅 및 플라즈마 용사법으로 코팅된 안정화지르코니아/CoNiCrAIY 계면의 산화거동을 조사하기 위하여 $900^{\circ}C$에서 등온산화시험동안 생성되는 산화막층과 스피넬 생성 거동을 관찰, 분석하였다. 코팅 직후 코팅층에 고르게 분포하고 있는 Co,Ni,Cr,AI,Zr의 원소들이 산화시간에 따라 확산하여 산화반응을 하였다. 초기 20시간의 산화기시간에 안정화지르코니아/CoNiCrAIY 계면에 주요 성분이 $\alpha$-$AI_2O_3$인 산화막층이 생성되었고, CoNiCrAIY층에는 AI의 외부확산으로 인한 AI 결핍지역이 생성되었다. 산화시험동안 $\alpha$-AI2O층이 임계두께까지 성장한 후에 산화막층의 성장속도는 감소하였고, 안정화지르코니아/산화막층 계면에 스피넬, $Cr_2O_3$, $CO_2CrO_4$의 형성으로 인한 크랙이 관찰되었다.

• Journal of Radiation Protection and Research
• /
• 제8권2호
• /
• pp.15-35
• /
• 1983

특별히 제작한 영동장치를 써서 고전압 전기영동법에 의하여 24시간 중성자 조사하고 150일 냉각한 90% 농축질산우라닐 수용액의 핵분열 생성물을 분리하였다. 핵분열생성물부터 Zr-95, Nb-95의 분리는 0.1M-$HClO_4$(pH=0.85), 0.05M-HCl+0.09M-KCl(pH=0.9), 0.1M-HCl(pH=1.1), 0.01M-HCl(pH=2.0)의 이동조건에서 가능하며 Zr-95, Nb-95는 원점부터 +1cm의 거리에서 분리된다. Zr-95와 Nb-95의 상호분리는 2% 수산암모늄을 첨가하는 경우 가능하다. 즉 0.1M-$HClO_4$, 0.05M-HCl+0.09M-KCl, 0.1M-HCl, 0.1M-식초산+0.1M- 식초산나트륨(pH=4.68)의 이동조건에서 원점부터 $-6{\sim}-7cm$ 거리에서 Nb-95, $+1{\sim}-1cm$ 거리에서 Zr-95가 각각 분리된다. 핵분열생성물부터 Ru-103의 분리는 0.025M-$Na_2CO_3+0.025M-NaHCO_3(pH=10.0)$, $0.01M-Na_3PO_4(pH=11.7)$, 0.1M-NaOH(pH=13.2)의 이동조건에서 가능하며 Ru-103는 각각 원점부터 -6cm, -4cm, -3cm거리 이동한다.

• Macromolecular Research
• /
• 제8권5호
• /
• pp.238-242
• /
• 2000

The new trisiloxane-bridged heterometallic dinuclear metallocenes, hexamethyltrisiloxanediyl(cyclopentadienyltitanium trichloride) (cyclopentadienylindenyl zirconium dichloride) , $C_3ITi-Cp(CH_3)_2Si-O-Si(CH_3)_2-O-Si(CH_3)_2-Cp-ZrIndCI_2$ (1) and hexamethyltrisiloxanediyl (cyclopentadienylindenylhafnium dichloride) (cyclopentadienylindenyl zirconium dichloride), $C_2IndHf-Cp(CH_3)_2Si-O-Si(CH_3)_2-Cp-ZrIndCl_2$ 2) connecting two dissimilar metallocenes were synthesized and used for ethylene polymerization in the presence of modified methylaluminoxane (MMAO) cocatalyst. The catalytic activity of heterometallic dinuclear metallocenes, 1 and 2 was lower than that of corresponding mononuclear metal-locene as well as two physically mixed catalysts, $CpTiCl_2/Cp_2ZrCl_2 and Cp_2HfCl_2/Cp_2ZrCl_2$. On the tither hand, MWD of PE obtained with 1 and 2 was remarkably broader ($M_w/M_n$) became up to 9.4) than those of PEs prepared with the corresponding mononuclear metallocenes and mixed catalysts. With analysis by GPC and CFC, it was found that PE produced by the heterometallic dinuclear metallocenes exhibited the definite bimodal GPC curves that should cause the broadening of MWD.

• E2M - 전기 전자와 첨단 소재
• /
• 제6권6호
• /
• pp.573-581
• /
• 1993

0.10Pb(Sb$_{1}$2/Sn$_{1}$2/)O$_{3}$-0.25PbTiO$_{3}$-0.65PbZrO$_{3}$ 세라믹을 소결온도 및 시간을 각각 1200-1250[.deg.C]에서 2, 4, 6시간으로 변화시켜 제작하였으며 시편의 소결조건 및 MnO$_{2}$(0~0.30mol%)첨가량에 따른 잡음특성을 관찰하였다. 초전계수 및 전압감도는 1250[.deg.C]에서 2시간 소결시킨 시편에서 각각 3.49x$10^{-8}$[C/$cm^{2}$K], 147[V/W]의 최대값을 나타내었다. 초전형 적외선 검출기의 잡음특성에 있어 증폭기의 전류잡음 .DELTA.V$_{i}$가 총 잡음전압에 대해 지배적인 경향을 나타내었으며 MnO$_{2}$가 0.24[mol%] 첨가된 1250[.deg.C]에서 2시간 소결시킨 시편에서 가장 양호한 pop-corn잡음특성을 나타내었다.다.

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.91-97
• /
• 2019

The effect of different Ni-containing additives on the sintering behavior and electric conductivity of the proton conducting electrolyte $BaCe_{0.35}Zr_{0.5}Y_{0.15}O_{3-{\delta}}$ (BCZY5) was investigated. Ni-doped, NiO-added, and $BaY_2NiO_5$(BYN)-added (all 4 mol%) BCZY5 samples were prepared by the solid state synthesis method and sintered at $1400^{\circ}C$ for 6 h. Among the three samples, the onset of densification was observed at the lowest temperature for NiO-added BCZY5, which is attributed to the formation of an intermediate phase at a low melting temperature. The BYN-added sample, where no consumption of the constitutional elements of the electrolyte was expected during sintering, exhibited the highest electrical conductivity whereas the doped sample had the lowest conductivity. The electrical conductivities at $500^{\circ}C$ under humid argon atmosphere were measured to be 2.0, 4.8, and $6.2mS{\cdot}cm^{-1}$ for Ni-doped and NiO- and BYN-added samples, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.836-839
• /
• 2001

Ba(Zr$_{x}$Ti$_{l-x}$)O$_3$(BZT) thin films of x=0.2 and 150nm thickness were prepared on Pt/SiO$_2$/Si substrate by RF Magnetron Sputtering deposition at several temperature (40$0^{\circ}C$, 50$0^{\circ}C$, $600^{\circ}C$). As the substrates temperature increase, crystallization of the films and high dielectric constants can be obtained. Capacitance of the film deposited at high temperature is more sensitive to the applied voltage than that of the film deposited at low temperature, and the film's breakdown voltage is higher in low temperature.ure.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.106-111
• /
• 2005

Failure mechanisms were investigated for the two layer thermal barrier coatings consisting of NiCrAlY bond coat and $ZrO_2-8wt.\% Y_{2}O_3$ ceramic coating during cyclic oxidation. $Al_{2}O_3$ developed at the ceramic coating/bond coat interface first, followed by the Cr/Ni rich oxides such as $NiCr_{2}O_4 and Ni(Al,Cr)_{2}O_4$ during cyclic oxidation It was observed that the spalling of ceramic coatings took place primarily within the NiCrAlY bond coat oxidation products or at the interface between the bond coat oxidation products and zirconia based ceramic coating or the bond coat. It was also observed that the fracture within these oxidation products occurred with the formation of $Ni(Cr,Al)_{2}O_4$ spinel or Cr/Ni rich oxides. It was therefore concluded that the formation of these oxides was a life-limiting event for the thermal barrier coatings.

• 센서학회지
• /
• 제4권4호
• /
• pp.75-80
• /
• 1995

금속 alkoxide를 출발물질로 PZT-PNN 3성분계 압전박막을 제작하여, 박막의 결정성과 전기적 특성을 평가하였다. 박막의 X-RD 분석결과 $550^{\circ}C$ 소결온도에서 결정성이 가장 양호하였다. D-E 이력곡선의 관측 결과 항전계는 28.8 kV/cm, 잔유분극은 $18.3\;{\mu}C/cm^{2}$ 이었다. 박막의 진성파괴전압은 $76.0\;{\sim}\;27.0\;MV/m$이었고, 소결온도가 상승함에 따라 특성이 저하되었다. 박막의 비유전율은 조성비에 따라 (50:40:10)은 406, (50:30:20)은 1084, (45:35:20)은 723, (40:40:20)은 316이었다.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.340-344
• /
• 1998

Failure mechanisms were investigated for the two layer thermal barrier coatings consisting of NiCrAlY bond coat and $ZrO_2$-8wt.% $Y_2O_3$ ceramic coating during cyclic oxidation. $Al_2O_3$ developed at the ceramic coating/bond coat interface first, followed by the Cr/Ni rich oxides such as $NiCr_2O_4$ and $Ni(Al, Cr)_2O_4$ during cyclic oxidation. It was observed that the spalling of ceramic coatings took place primarily within the NiCrAlY bond coat oxidation products or at the interface between the bond coat oxidation products and zirconia based ceramic coating or the bond coat. It was also observed that the fracture within these oxidation products occurred with the formation of $Ni(Cr, Al)_2O_4$ spinel or Cr/Ni rich oxides. It was therefore concluded that the formation of these oxides was a life-limiting event for the thermal barrier coatings.