• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.294-297
• /
• 2013

ZnO crystals with octahedral shape were synthesized by thermal evaporation technique. $ZnF_2$ powder was used as the source material. The thermal evaporation and oxidation of $ZnF_2$ powder was carried out for 1 hr at $1,000^{\circ}C$ in air under atmospheric pressure. SEM images showed that the ZnO crystals produced by oxidizing $ZnF_2$ vapor possessed a characteristic octahedral shape. XRD spectrum revealed that the ZnO octahedron had hexagonal wurtzite structure. In the room temperature photoluminescence spectrum, a strong green emission peak at around 510 nm was observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.336-339
• /
• 2004

근래에 $TiO_2$를 이용한 염료감응형 태양전지에 대한 연구가 많이 진행되어 이미 실용화 단계에 이르고 있다. 그러나, 이러한 $TiO_2$를 이용한 태양전지 효율이 한계에 이르러 이를 향상시키기 위한 노력이 다방면에서 이루어지고 있다. 이에 본 연구에서는 넓은 밴드갭 직접형 반도체재료로서, 전기적, 열적, 광학적, 촉매 특성이 우수하고, 압전성이 크고 광투과성 및 형광성이 매우 우수하여, 현재 여러 전자사업 분야에서 사용될 뿐아니라, 태양전지분야에서도 최근 관심이 증대되고 있는, ZnO를 이용하여 $TiO_2$ 대체 전극재로서의 가능성을 고찰하였다. ZnO 슬러리는 유계 방법을 이용하여 제조하였고, 막은 닥터 블레이드(doctor blade)법에 의해 TCO 위에 형성되었다. 원료 분말 및 막의 형상은 FE-SEM에 의해 확인되었다. 형성된 막은 다양한 조건에서 소결하여, 최종적으로 샌드위치형 염료감응형 셀을 제조한 후 효율을 측정 비교하여 태양전지의 활성 전극 재료로서 적정한 ZnO 조건을 예측할 수 있었다.

• 한국자기학회지
• /
• 제14권1호
• /
• pp.18-24
• /
• 2004

Fe(N $O_3$)$_3$$.$9$H_2O$, Ni(N $O_3$)$_2$.6$H_2O$, Zn(N $O_3$)$_2$$.$6$H_2O$와 같은 질산금속염들을 습식법의 일종인 습식 직접 합성법을 이용하여 Ni-Zn ferrite 분말로 합성하였다. 분말의 화학조성은(N $i_{0.284}$F $e_{0.053}$Z $n_{0.663}$)F $e_2$ $O_4$로 하였으며, 고투자율 재료의 영역에 목표를 두었다. 습식 직접 합성법으로 시편을 제조하기 위하여 측량된 질산금속염들을 반응 용기 내에서 NaOH로 침전시키면서 9$0^{\circ}C$의 합성온도로 8시간 동안 교반.합성하였다. 가소 온도는 $700^{\circ}C$로 하여 2시간 유지시켰고, 소결온도는 11$50^{\circ}C$-12$50^{\circ}C$의 범위에서 각각 2시간 유지시켰다. 또 금속산화물을 출발물질로 하여 동일한 조성을 가지는 분말을 습식볼밀링하여 제조하였으며, 두 가지의 공정으로 합성된 분말의 특성과 소결체의 전자기적 특성을 비교.연구하였다. 동일 조건일 경우, 습식 직접 합성법으로 제조하면 입도분포가 좁고, 고순도이며, 미분말인 페라이트 분말을 얻을 수 있었으며 소결체의 특성 또한 비교적 높은 투자율과 자화 값을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제11권3호
• /
• pp.242-247
• /
• 1998

In this study, we have synthesized $ZnGa_2O_4$:Mn,X powder doped with Mn, MnO, $MnF_2$ and $MnCl_2$, low voltage green emitting phosphor, in vacuum atmosphere. From PL spectra, the intensity of the emission peak, the brightness with coactivator show that $ZnGa_2O_4$:Mn,Cl > $ZnGa_2O_4$:Mn,F > $ZnGa_2O_4$:Mn,O > $ZnGa_2O_4$:Mn. These improvement of the brightness are caused by the increase of the concentration of $Mn^{2+}$ ion. In case of $ZnGa_2O_4$:Mn,Cl and ZnGa$_2$O$_4$:Mn,F, the brightness is enhanced much more, which is owed to the decrease of defect of host material. For $ZnGa_2O_4$:Mn,Cl phosphor fabricated with optimized condition, the decay time becomes short from 30 ms of the $ZnGa_2O_4$:Mn and $ZnGa_2O_4$:Mn,O to 6 ms and the brightness of CL at 1 kV, 1 mA is 60 cd/$m^2$.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.411-417
• /
• 2019

Graphene doped zinc oxide nanoparticles (G-ZnO) were prepared using modified hummer's technique together with the ultrasonic method and characterized by field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FTIR) and high-resolution transmission electron microscopy (HRTEM). Different samples of epoxy resin nanocomposites reinforced with G-ZnO nanoparticles were prepared and were marked as F1 (without adding nanoparticles), F2 (1% w/w G-ZnO), and F3 (2% w/w G-ZnO) in combination of ≈ 56:18:18:8w/w% with epoxy resin/hardener, ammonium polyphosphate, boric acid, and Chitosan. The peak heat release rate (PHRR) of the epoxy nanocomposites was observed to decrease dramatically with the increasing G-ZnO nanoparticles. However, the LOI values increased significantly with the increase in wt % of G-ZnO nanoparticles. From the UL-94V data, it was confirmed that the F2 and F3 samples passed the flame test and were rated as V-0. The results obtained in the present work clearly revealed that the synthesized samples can be used as efficient materials in fire-retardant coating technology.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.150-155
• /
• 1997

Powder type electroluminescent device(P-ELD) in this study was prepared by printing method. P-ELDs were basically composed of phosphor, insulator and transparent conducting layer. The phosphor powder was prepared by sintering the mixture of ZnS as a host, Cu as an activator, and NaCl as a flux for co-activator and enhancement of growth of the phosphor particles. The phosphor layer was made by printing the paste of the cyanoethylpullan as a binder and the ZnS system phosphor powder. In order to evaluate the luminescence characteristics of ZnS P-ELD, applied voltage - luminance(V-L), frequency-luminance(f-L), and relative luminance spectra(L- .lambda.) characteristics were measured. The experimental results show that luminance increased with increasing the applied voltage and frequency. It can be explained in terms of the potential barrier formed between ZnS and CuS. Two emission peaks in luminance-wavelength spectra measured at applied voltage of 100 $V_{rms}$ were observed at 500nm as a primary peak and 460nm as a secondary peak, respectively.y.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.289-294
• /
• 2010

For the aim of low-temperature co-fired ceramic microwave components, sintering behavior and microwave properties (dielectric constant ${\varepsilon}_r$, quality factor Q, and temperature coefficient of resonant frequency ${\tau}_f$) are investigated in $Bi_{18}O(Ca_{0.725}Zn_{0.275})_8Nb_{12}O_{65}$ [BCZN] ceramics with addition of $V_2O_5$. The specimens are prepared by conventional ceramic processing technique. As the main result, it is demonstrated that the additives ($V_2O_5$) show the effect of lowering of sintering temperature and improvement of microwave properties at the optimum additive content. The addition of 0.25 wt% $V_2O_5$ lowers the sintering temperature to $890^{\circ}C$ utilizing liquidphase sintering and show the microwave dielectric properties (dielectric constant ${\varepsilon}_r$ = 75, quality factor $Q{\times}f$ = 572 GHz, temperature coefficient of resonance frequency ${\tau}_f\;=\;-10\;ppm/^{\circ}C$). The estimated microwave dielectric properties with $V_2O_5$ addition (increase of ${\varepsilon}_r$, decrease of $Q{\times}f$, shift of ${\tau}_f$ to negative values) can be explained by the observed microstrucure (sintered density, abnormal grain structure) and possibly high-permittivity $Bi_{18}Zn_8Nb_{12}O_{65}$ (BZN) phase determined by X-ray diffraction.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.51-59
• /
• 2000

Sink roll has been used in molten 55%Al-Zn alloy bath of continuous galvanizing line for sinking and stabilizing working steel strip in molten metal bath. In the process, the sink roll body inevitably build up dross compounds and pitting on the sink roll surface during 55%Al-Zn alloy coated strip production, and the life time of the sink roll is shorten by build up dross compounds and pitting. The present study examined the application of thermally sprayed ceramic coatings method on sink roll body for improving erosion resistance at molten 55% Al-Zn pool. In this experiment, the stainless steels such as STS 316L and STS 430F were used as the substrate materials. The CoNiCr and WE-Co powder were selected as bond coating materials. Moreover $Al_2O_3-ZrO_2-SiO_2 and ZrO_2-SiO_2$ powders selected as the top coating materials. Appearances of the specimens before and after dipping to molten 55%Al-Zn pool were compared and analyzed. As a result of this study, STS430F of substrate, WC-Co of bond spray coatings, $ZrO_2-SiO_2$ power of top spray coatings is the best quality in erosion resistance test at molten 55%Al-Zn pool

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.45-56
• /
• 1999

본 연구의 목적은 불순물들을 다량 함유한 mill scale과 ferro-Mn을 정제과정을 거쳐 불순물들의 함량을 100 ppm 이하로 감소시킨 후 이들을 원료로 사용하여 Mn-Zn ferrite 원료분말을 기존의 고상반응법이 아닌 분무배소 방법에 의해 제조하는데 있다. 이를 위하여 본 연구에서는 정제된 원료용액을 분무배소시킴으로써 고상의 미세한 복합산화물 분말을 형성시키며, 생성된 분말을 효율적으로 포집할 수 있을 뿐 아니라 유해 생성기체를 중화시킬 수 있는 분무배소로 system을 개발하였다. 또한 정제된 원료 용액을 본 연구에서 개발된 분무배소로 내로 투입시킴으로써 Mn-ferrite 및 $Fe_{2}O_{3}$와 $Mn_{2}O_{3}$의 복합산화물 분말을 제조하였으며, 이때 각각의 조건 하에서 생성된 분말들에 대해 조성, 비표면적 및 입도 분포 등의 물리적, 화학적 특성을 조사하였다. 분무 배소법에 의해 생성된 원료분말에 ZnO 및 기타 첨가제를 정해진 조성으로 혼합시킨 후 성형 및 엄격하게 제어된 소결과정에 의해 Mn-Zn ferrite core를 제조하였다. 또한 제조된 core에 대하여 손실값, 초투자율, 잔류자속밀도, 항자력 및 포화자속밀도의 자기적 특성을 측정하였으며, 이 결과들을 바탕으로 Mn-Zn ferrite 원료 분말을 제조하기 위한 분무배소방법의 타당성을 확인하였다.

• 대한화학회지
• /
• 제63권6호
• /
• pp.453-458
• /
• 2019

Synthesis of ZnCo₂O₃ oxide is performed by sol-gel method via nitrate-citrate route. Powder X-ray diffraction (XRD) study shows monoclinic unit cell having lattice parameters: a = 5.721(1) Å, b = 8.073(2) Å, c = 5.670(1) Å, β = 93.221(8)°, space group P_2/m and Z = 4. Average crystallite sizes determined by Scherrer equation are the range ~14-32 nm, whereas SEM micrographs show nano-micro meter size particles formed in ZnCo₂O₃. Endothermic peak at ~798 K in the Differential scanning calorimetric (DSC) trace without weight loss could be due to structural transformation and the endothermic peak ~1143 K with weight loss is due to reversible loss of O₂ in air atmosphere. Energy Dispersive X-ray (EDX) analysis profile shows the presence of elements Zn, Co and O which indicates the purity of the sample. Magnetic measurements in the range of +12 kOe to -12 kOe at 10 K, 77 K, 120 K and at 300 K by PPMS-II Physical Property Measurement System (PPMS) shows hysteresis loops having very low values of the coercivity and retentivity which indicates the weakly ferromagnetic nature of the oxide. Observed X-band EPR isotropic lineshapes at 300 K and 77 K show positive g-shift at g_iso ~2.230 and g_iso ~2.217, respectively which is in agreement with the presence of paramagnetic site Co²⁺(3d⁷) in the oxide. DC conductivity value of 2.875 ×10^-8 S/cm indicates very weakly semiconducting nature of ZnCo₂O₃ at 300 K. DRS absorption bands ~357 nm, ~572 nm, ~619 nm and ~654 nm are due to the d-d transitions ⁴T_1g(⁴F)→²E_g(²G), ⁴T_1g(⁴F)→⁴T_1g(⁴P), ⁴T_1g(⁴F)→⁴A_2g(⁴F), ⁴T_1g(⁴F)→⁴T_2g(⁴F), respectively in octahedral ligand field around Co²⁺ ions. Direct band gap energy, E_g~ 1.5 eV in the oxide is obtained by extrapolating the linear part of the Tauc plot to the energy axis indicates fairly strong semiconducting nature of ZnCo₂O₃.