• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.97-112
• /
• 1978

The rule 15, 16 and 17 of International Regulations for Preventing collisions at Sea direct actions to avoid collision when two power-driven vessels are crossing. But these rules do not present the safety minimum approaching distances outside which a give- way vessel deeps out of the way of a stand-on vessel. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship kinematics as the method to calculate this distance. The author worked out mathematic formulas for calculating the safety minimum approaching distances outside which the give-way vessel takes the actions to avoid collisions in accordance with the cross angles of the crossing vessels' courses. Figuring out actually the values of maneuvering indices of the M. S. Koan Ack San (GT: 224tons), the training ship of the National Fisheries University of Busan and the M. S. Golden Clover (GT: 101, 235tons) of the Eastern Shipping Co., Ltd. through their Z test, the author applied these values to the calculating formulas and calculated the safety minimum approaching distances. The results of calculations are as follows; 1. The greatest distance is to be kept by the give-way vessel to avoid collision when the cross angle of courses is 90$^{\circ}$ or near it. In such case the safety minimum approaching distance of a small vessel must be more than 5 times of her own length and that of a large vessel more than 11 times of her own length. 2. Collision danger is greater when crossing angle is obtuse than in an acute angle, therefore greater distance is to be kept by the give-way vessel to avoid collision in the case of the obtuse angle. 3. The actions to be taken to avoid collisions by the give-way vessel in Rule 16 and by the stand-on vessel in Rule 17(a)(ii) of International Regulations for Preventing Collisions at Sea, must be done outside the above safety minimum approaching distance. When inevitably such actions are to be taken within the safety minimum approaching distance, they should be accompanied with engine motions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.520-527
• /
• 2008

Purpose: This study was conducted to evaluate the shear bond strength of composite resin to dentin when etched with laser instead of phosphoric acid. Material and methods: Recently extracted forty molars, completely free of dental caries, were embedded into acrylic resin. After exposing dentin with diamond saw, teeth surface were polished with a series of SiC paper. The teeth were divided into four groups composed of 10 specimens each; 1) no surface treated group as a control 2) acid-etched with 35%-phosphoric acid 3) Er:YAG laser treated 4) Er,Cr:YSGG laser treated. A dentin bonding agent (Adapter Single Bond2, 3M/ESPE) was applied to the specimens and then transparent plastic tubes (3 mm of height and diameter) were placed on each dentin. The composite resin was inserted into the tubes and cured. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours and the shear bond strength was measured using a universal testing machine (Z020, Zwick, Germany). The data of tensile bond strength were statistically analyzed by one-way ANOVA and Duncan's test at ${\alpha}$= 0.05. Results: The bond strengths of Er:YAG laser-treated group was $3.98{\pm}0.88$ MPa and Er,Cr:YSGG laser-treated group showed $3.70{\pm}1.55$ MPa. There were no significant differences between two laser groups. The control group showed the lowest bond strength, $1.52{\pm}0.42$ MPa and the highest shear bond strength was presented in acid-etched group, $7.10{\pm}1.86$ MPa (P < .05). Conclusion: Laser-etched group exhibited significantly higer bond strength than that of control group, while still weaker than that of the phosphoric acid-etched group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.783-792
• /
• 2002

This experiment was conducted to investigate the effects of supplementary level of extruded poultry manure, corn and tapioca mixture (EPM) on growth performance, nutrient digestibility and body composition in korean native goats. Total 15 heads of Korean native goats (10 kg B.W.) were randomly assigned into five treatment groups (EPM 10, 20, 30, 40% and control.) and feeding trial was done for six weeks with ad libitum. Protein level of the extrudate with poultry manure was directly proportional to corn supplements rate. NFE and Ca content in EPM also were functional of the tapioca supplements levels. Daily body weight gain was significantly (p<0.05) reduced in EPM 40% group, but no significant differences were observed in other groups. Concentrate feed intake was high in EPM 10 to 30% groups, compared to the control. Feed conversion ratio also was relatively higher in EPM groups than in the control. As EPM level increased, dry matter digestibility was proportionally decreased, but that of crude protein was enhanced. Dressed carcass percentage was significantly (p<0.05) reduced with the increase of EPM level, showing control 49.7, EPM 10% 49.8, EPM 20% 48.3, EPM 30% 47.9 and EPM 40% 45.2, respectively.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.83-94
• /
• 2009

The aim of this study was to investigate the shear bond strength between zirconia ceramic and resin cement according to various surface treatments. The surface of each zirconia ceramic was subjected to one of the following treatments and then bonded Rely X Unicem or Rely X ARC resin cement; (1) Rocatec system and $50{\mu}m$ surface polishing, (2) No treatment and $50{\mu}m$ surface polishing, (3) Rocatec system and $1{\mu}m$ surface polishing, (4) No treatment and $1{\mu}m$ surface polishing. Each of eight bonding group was tested in shear bond strengths by universal testing machine(Z020, Zwick, Ulm, Germany) with crosshead speed of 1mm/min. The results were as follows; 1. Rocatec treatment groups showed greater bonding strengths than No Rocatec groups. There was significant difference of among groups(P<0.001) 2. For Rocatec groups, $50{\mu}m$ surface roughness groups showed greater bonding strengths than $1{\mu}m$ surface roughness groups.(P<0.001) But for No Rocatec groups, There was no significant difference of among groups(P>0.05) 3. Rely X Unicem groups showed greater bonding strengths than Rely X ARC groups. There was significant difference of among groups(P<0.01) Within the conditions of this study, Rocatec treatment was an effective way of increasing zirconia bonds to a resin cement, even in the case of self-adhesive resin cement.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.240-252
• /
• 1999

Floristic composition and phytosociological studies of Mt. Chongok and Mt. Tuta were investigated, and that was compared with the previously published report in 1993. Vascular plants were composed of 100 families, 358 genera, 573 species, 95 varieties, and 18 formae, totaling 686 taxa. The vegetation was relatively well conserved based on Pteridophyta calculation (Pte-Q), 1.13. Compared with the vascular plants of the southern and northern slope area, the vascular plants of the southern slope area were composed of 87 families, 287 genera, 419 species, 73 varieties, and 11 formae, totaling 503 taxa, and those of the northern slope area consisted of 94 families, 293 genera, 427 species, 73 varieties, and 12 formae, totaling 512 taxa, respectively. Also, compared with the taxa in each side, both sides were composed of 332 species in common, southern sides, 172 species and northern sides, 182 species, respectively. The number of species of 11 families belonged to the higher level among total families taxa was composed of 328 species(47.8%). Among them, Compositae and Rosaceae were included much more species than remnant families. Korean endemic species were composed 16 families, 24 genera, 20 species, 8 varieties and 2 formae, totaling 30 species(4.4%). Compared with the Korean endemic taxa in each side, both sides were composed of 14 species in common, southern sides, 11 species and northern sides, 5 species, respectively. A naturalized plants were 20 species, correspond to 9.2% of totaling 218 species appeared in South Korea. Among them,12 species were appeared commonly in both sides, southern sides, 16 species and northern sides, 16 species, respectively. Life form spectra was H-D1-R5-e type and, useful resources plants are as follows; edible source(42.4%), medicinal source(31.5%), ornamental source(15.6%) and pasture source (13.3%) in the total region. The forest vegetation of the southern slope was classified into 1 order, 1 alliances and 5 communities; Rhododendro-Quercetalia mongolicae, Lindero-Quercion mongolicae, Quercus mongolica Typical community, Populus davidiana-Quercus mongolica community, Pinus koraiensis-Taxus cuspidata community, Pinus densiflora-Carex humilis var. nana community, Betula costata-Betula ermanii community. It is considered that the slight difference of the flora and vegetation in the northern and southern slope is mostly due to the topographical and climatic difference. Even closer investigation is required for the more accurate comparison in this area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.11-21
• /
• 2014

The purpose of this study was to furnish basic information for forest community ecology and to accumulate vegetational datum related to hierarchy of forest community for the efficient management of forest vegetation in Mt. Mani. Samples were collected and analyzed by 32 releves from August to October in 2010 using phytosociological analysis methodology of Z-M school and importance value analysis. The results were summarized that the forest vegetation was classified into 5 units in total. Importance value at vegetation unit 1 indicated Pinus densiflora 54.31 (18.10%), Quercus mongolica 39.21 (13.07%), Carpinus coreana 37.29 (12.43%), at vegetation unit 2 Quercus mongolica 89.43 (22.23%), Rhododendron mucronulatum 57.75 (14.43%), Carpinus coreana 47.19(11.80%), at vegetation unit 3 Styrax japonica 53.97 (13.50%), Acer mono 33.60 (8.40%), Carpinus coreana 26.48 (6.62%), Quercus serrata 22.51 (5.64%), at vegetation unit 4 Carpinus coreana 47.70 (11.92%), Quercus acutissima 38.40 (9.60%) and at vegetation unit 5 Evodia daniellii 80.59 (20.14%), Robinia pseudoacacia 35.00 (8.74%), Pueraria thunbergiana 28.63 (7.15%), Quercus dentata 28.20 (7.05%) in the order, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.656-667
• /
• 2019

This study is a descriptive research to grasp the effects of job stress on turnover intention and to confirm the mediating effect of organizational commitment according to the extent of job stress, organizational commitment and turnover intention in the relations between job stress and Turnover Intention of nurses working in general hospitals. Method: The subjects of this study were 199 nurses are working in general hospitals, that have more than 200 beds and less than 400 beds, located in Gwangju. I surveyed them using a structured questionnaire for collecting data from Sep. 01, 2017 to Sep. 20, 2017. The collected data were analyzed by the frequency, the percentage, t-test, ANOVA, Scheffe's Test, Pearson's Correlation Coefficient, Multiple Regression Analysis and Sobel Results: In the first step, job stress as an independent variable had a statistically significant effect on organizational commitment(${\beta}=-.321$, p<.001). In the second step, job stress, an independent variable, also had an important effect on turnover intention as a dependent variable(${\beta}=.389$, p<.001). Job stress and organizational commitment were meaningful predictor variables of turnover intention in the third step. The explanatory power of two variables was 45.5%. The value ${\beta}$ of job stress in the third step was .203(p<.001) which was smaller than its value ${\beta}$,.389(p<.001), in the second step. That meant organizational commitment had the mediating effect on turnover intention. The Sobel Test was conducted to verify the significance of the extent of the mediating effects of organizational commitment. The test result was that the value Z was -3.694 and the mediating effect of organizational commitment was significant on the relation between job stress and turnover intention(p<.002). Conclusion: this study is expected be useful to find ways to reduce subjects' turnover intention by decreasing their job stress, increasing their organizational commitment and developing intervention programs as basic data.