• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.120-126
• /
• 2004

A damage-reduced trench was investigated in view of the defect distribution along trench sidewall and bottom using high resolution transmission electron microscopy, which was formed by HBr plasma and additive gases in magnetically enhanced reactive ion etching system. Adding $O_2$ and other additive gases into HBr plasma makes it possible to eliminate sidewall undercut and lower surface roughness by forming the passivation layer of lateral etching. To reduce the RIE induced damage and obtain the fine shape trench corner rounding, we investigated the hydrogen annealing effect after trench formation. Silicon atomic migration on trench surfaces using high temperature hydrogen annealing was observed with atomic scale view. Migrated atoms on crystal surfaces formed specific crystal planes such as (111), (113) low index planes, instead of fully rounded comers to reduce the overall surface energy. We could observe the buildup of migrated atoms against the oxide mask, which originated from the surface migration of silicon atoms. Using this hydrogen annealing, more uniform thermal oxide could be grown on trench surfaces, suitable for the improvement of oxide breakdown.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.211-215
• /
• 1988

Anion chromatographic (lC) method was developed for the determination of sulfites infoods. Sulfites refer to sulfur dioxide that was separated from a food sample by addition of acid and heating, and carried into a trapping solution by distillation. The trapping solution was applied to IC system. Sulfites was separated on an anionic separator column, HPIC-AS4A with 0.75mM $NAHCO_3/2.25mM\;Na_2CO_3$ as the eluent and determined by the use of conductivity detector. The recoveries of sulfites added to water, carrot and apple at level of 1 ppm were 99.8%, 91.6% and 83.5%, respectively. The detection limit was 0.2 ppm in the case of a 10 g sample size. All experiment could be finished within 20 minutes

• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.35-49
• /
• 2011

Objectives : This study aims to reveal the characteristics of formulas in "Xi$\v{a}$o' Er Y$\`{a}$o Zh$\`{e}$ng Zh$\'{\i}$ Ju$\'{\e}$. Methods : For that objectives, We analyzes formulas in "Xi$\v{a}$o' Er Y$\`{a}$o Zh$\`{e}$ng Zh$\'{\i}$ Ju$\'{\e}$. In the text, 132 formulas were described. To comprehend the formulas, we classified them as several bases. Results : After those analyses, we bring to a conclusion as follows. 1. 30 formulas are described that treated convulsive diseases (j$\={i}$ngf$\={e}$ng, 惊風). Next, g$\={a}$n(疳), parasite infection, diarrhea/dysentery, dermatosis and etc were in the order. 2. Classified by the formulation, Yu$\'{\a}$nj$\`{i}$(圓劑) was the best(70 kinds of formulas, 53%). S$\v{a}$nj$\`{i}$(散劑) was a form of 41 formulas(31%). T$\={a}$ngj$\`{i}$(湯劑) and g$\={a}$oj$\`{i}$(膏劑) were a form of 5 formulas each. 10 formulas were assumed the form of w$\`{a}$iy$\`{o}$ngj$\`{i}$(外用劑). 3. We researched in-depth analysis of Yu$\'{\a}$nj$\`{i}$. As a results, dosage, additive(輔料) and the time to take of Yu$\'{\a}$nj$\`{i}$ were decomposed. Also, the formulas that treated convulsive diseases were analyzed by the herbs classification. Conclusions : Though the formulas that treated convulsive diseases were hard to application at local clinic, overall nosology of pediatrics was reflected comparatively. "Xi$\v{a}$o' Er Y$\`{a}$o Zh$\`{e}$ng Zh$\'{\i}$ Ju$\'{\e}$ was expected to play a role for reconsideration of formulas' formulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.224-228
• /
• 2012

We have developed new materials that lead to methyl meth acrylate monomer and styrene monomer to using polymerization method. The materials have a powder form and show liquid behavior. We call the "Electronic Bead". An our experiment, a positive-charged particle has $TiO_2$, polymer and CCA(-), while a negative-charged particle consists of carbon black, polymer and CCA(+). The charged particles have electrical characteristic of white -10 uC/g and black 10 uC/g, respectively. Also, these particles have good fluidity by additive of nano-sized silica. Using these materials, we demonstrated prototype displays that have $320{\times}320$ array of pixels and 6-in-diagonal viewable image size, driven by passive-matrix addressing. The reflectivity shows about 30% even though our experiment is at the beginning point. Also, the panel has contrast ratio 6:1. We think there are many chances to improve reflectivity through modifying components of particle resin, mixture ratio of each particle, panel structure and so on.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.245-246
• /
• 2008

고밀도 트렌치 공정을 위해 HBr 가스를 주로하고 $CF_4$, $SiF_4$, $NF_3$, He-$O_2$ 등을 첨가 가스로 이용하여 트렌치 공정을 하였다. 트렌치 공정시 첨가가스 비에 따라 트렌치 형상이 다양하게 되었다. 이러한 형상은 트렌치 소자 제조시 트렌치 내부를 채울 경우 여러 가지 어려움이 발생되는데, 특히 트렌치 내부가 잘 채워지지 않고 void가 생길 경우 소자의 신뢰성에 많은 영향을 미칠 수 있다. 본 연구에서는 고밀도 트렌치를 병렬로 형성한 후 형성된 트렌치 내부를 잘 채울수 있는 고밀도 트렌치 공정을 연구하였다. 트렌치 형성시 HBr을 주가스로 하고, $NF_3$, $CF_4$, $SiF_4$ 를 비율을 각각 59:27:7:7로 했을 때 수십만 트렌치 형성 각도가 약 $89^{\circ}$로 매우 좋은 형상을 얻었다.

• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.69-74
• /
• 1996

Capsaicin(CAP) is a pungent ingredient of hot pepper that has been used as a spicy food additive, pre-servative, and medicine. In this study, the effect of CAP on L-ascorbic acid(AsA)level in various tissues as well as its urinary excretion. and drug-metabolizing enzyme activity in rats were investigated. Rats fed AsA-deficient diets for 17days were injected intraperitoneally with 1mg of CAP in 0.5ml of ethanol-Tween 80-saline(20 :10 : 70, v/v/v). Control rats received the equal volume of the same solution without CAP. Urine was collected for 3 day after the CAP injection, and after 5 days tissues were removed; their AsA contents were measured by high performance liquid chromatography combined with and electrochemical detector. In addition, hepatic microsomal ethoxyresorfin O-deethylase(EROD) activity as measured. Urinary AsA excretion changed significantly following CAP injection. One and two days after CAP injection, the urinary AsA increased 2-and 3-fold in the CAP injected group, compared to the control, but the contents of adrenal glands and brain were lower than those of the control Dehydroascorbic acid contents in adrenal glands of the CAP injected group were higher than that of the control These results suggested that a single large dose of CAP could temporarily cause the redistribution of AsA in tissues accompanying by its urinary excretion, by affecting probably a biological system including mixed function oxygenase system(MFOS)

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.27-35
• /
• 2013

One of the most important factors that have a large influence on performance of the solar water heater system is performance of the solar collector, more detailedly, coating technology on the surface of the solar collector, which can provide high solar absorptance and low emittance. The core of the coating technology is to coat solar selective surfaces. In this study, various performance experiments are carried out using $Cr_2(SO_4)_3{\cdot}15H_2O$ coating technology. Here, IGBT(Insulated Gate Bipolar Transistor) of 5000A-15V was used as the surface processing rectifier which can stably output power and also can control voltage and current. The plating solution mainly contains black chrome$^{+3}$ concentration, H-y Conductivity, N-u Complex, NF Additive and NC-2 Wetter. Before applying the black chrome coating on the copper plate, optimal conditions are provided by using various preprocessing methods such as removal of fat, activation, electrolytic polishing, nickel strike, copper sulfate plating and bright neckel plating, and then the automatic continuous coating experiment are performed according to plating time and cathode current density. In the experiment, after the removal of fat, chemical polishing, nickel strike and activation processes as the preprocessing methods, the black chrome coating was performed in a plate solution temperature of $28^{\circ}C$ and a cathode current density of $18A/cm^2$ for 90 seconds. The thickness of chrome and nickel on the coated plate is $0.389{\mu}m$, $159{\mu}m$ respectively. As a result of the coating experiment, it showed the most excellent performance having a high solar absorptance of 98% and a low emittance of $5{\pm}1%$ when the black chrome surface had a thickness of $0.398{\mu}m$.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.563-569
• /
• 2014

Ruby is one of the most favor colored gem, for beautiful red tone, be high in scarcity value. However, rubies with high quality are produced in restricted regions, such as in Thailand, Sri Lanka, Myanmar, and Tanzania etc., and they have been gradually exhausted by mining for a long period. Therefore, improving qualities of low level rubies with various treatments is arising an alternative way to obtain better rubies. Gemological and mineralogical properties of the natural ruby from Tanzanian were studied with heat treatments. Those characteristics were compared between only heat and adding flux materials under heating. Tanzanian raw rubies were applied a heat treatment ($1,600^{\circ}C$ for 6 hours). However, chromameter and UV-Vis analyses found that a simple heat treatment is inappropriated for the Tanzanian ruby. Although $Cr^{3+}$ containing for red color in the ruby increased with heat treatment, the ruby displays dark medium red because of Fe in the ruby as a form of $Fe_2O_3$. The low transparency after heat treatment is attributed to the recrystallization of $SiO_2$ which has a low melting point. Chromameter confirmed adding Pb-containing flux under heating greatly improves the clarity and color of Tanzanian rubies with micro-fractures and cavities on the surface. EMPA results show that Pb as an additive fills the cavities and cracks on raw Tanzanian rubies during the heat treatment. As a rewult of it, the quality of the Tanzanian ruby raw dramatically improved. These results indicate that the heat treatment with an additive (Pb in this study) is an effective way to obtain better quality of the Tanzanian ruby. Consequently, this study suggests a suitable method to improve the properties of the Tanzanina ruby. The result of this study would provide useful information to upgrade the qualities of similar gem stones such as corundum and sapphire.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.408-415
• /
• 1993

Systematic ab initio SCF calculations have been performed on the hydrogen-bonded dimers of fluoromethanes involving $CH_4,\;CH_3F,\;CH_2F_2\;and\;CHF_3$ with ammonia and water applying basis sets of 9s5p/5s and 9s5p1d/5p1d. Various ground state properties of these stable dimeric complexes have been evaluated. We compared these with corresponding properties of isolated monomers. We report equilibrium geometries, stabilization energies, dipole moments and force constants of intermolecular bonds. The effects arising as a consequence of the non-additive behavior of hydrogen bonding in chain-like oligomers are discussed. Systematic, methodical errors due to the use of the SCF approximation and the basis set dependence of the computed results are pointed out.