• 한국작물학회지
• /
• 제41권4호
• /
• pp.456-464
• /
• 1996

밀의 영양체 저장탄수화물인 fructan의 대사에 관련된 fructan exohydrolase(FEH) 효소의 특성을 구명하기 위해 FEH를 밀의 줄기와 엽초에서 정제, 실험한 결과를 요약하면 다음과 같다. 1. FEH의 분자량은 63.7kD이었으며, pH 5.5와 3$0^{\circ}C$에서 최고의 활성을 보였다. 2. FEH의 $K_{m}$ 과 $V_{max}$는 fructan의 크기에 따라 각각 10~37mM, 5g~179mM로 변이를 보였으며, tetrasaccharide가 본 실험에서 사용된 기질 중에서 가장 낮은 $K_{m}$ 과 $V_{max}$를 보였다. 3. 밀의 FEH는 $eta$(2 $\longrightarrow$1)로 연결된 fructan에 대하여 기질 특이성을 보였으며 $\beta$(2 $\longrightarrow$6) fructan과 sucrose는 분해할 수 없었다.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.160-170
• /
• 1999

Purification and biochemical experiments on the carboxylesterases-III (CE-III) from the indian meal moth, Plodia interpunctella (Hubner) were carried out to understand their enzymemological characteristics. The CE-III from the fifth instar larvae was purified by means of ammonium sulfate fractionation, gel permeation choromatography and ion exchange choromatography. The optimal temperature for the reaction of the CE-III on the 4 substrates ($\alpha$-Na, $\alpha$-Nb, $\beta$-Na and $\beta$-Nb) was confirmed at 4$0^{\circ}C$. The optimal pH for the reactions on the substrates $\alpha$-Na and $\alpha$-Nb was 7.5. But the optimal pH on the substrate $\beta$-Na and $\beta$-Nb was 8.0. The optimal substrate concentration for the reactions of the CE-III was 3.16 X 10$^{-3}$ M in $\alpha$-Na and $\beta$-Nb. On the substrate $\beta$-Na and $\alpha$-Nb, the optimal substrate concentration was 1.0 X 10$^{-3}$ M for CE-III. The $V_{max}$ and $K_{m}$ values of the carboxylesterases were varied by the substrates as followings: the $V_{max}$ of CE-III was 45.9 for $\alpha$-Na, 52.6 for $\beta$-Na, 36.4 for $\alpha$-Nb, and 83.3 ($\mu$ mol/min/mg protein) for $\beta$-Nb. The $K_{m}$ of CE-III was 1.43 X 10$^{-4}$ M for $\alpha$-Na, 3.57 x 10$^{-5}$ M for $\beta$-Na, 9.17 X 10$^{-5}$ M for $\alpha$-Nb, and 7.14 X 10$^{-5}$ M for $\beta$ -Nb, respectively. The CE-III seemed to have somewhat high thermostability considering that the temperature for effective denaturation on activity was about 5$0^{\circ}C$ ～ 6$0^{\circ}C$.EX>.EX>.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.97-103
• /
• 2019

Mn+1AXn (MAX) phases are a family of nano-laminated compounds that possess unique combination of typical ceramic properties and typical metallic properties. As a member of MAX-phase, $Ti_2AlN$ bulk materials are attractive for some high temperature applications. In this study, $Ti_2AlN$ bulk with high density were synthesized by spark plasma sintering method. X-ray diffraction, micro-hardness, electrical and thermal conductivity were measured to compare the effect of material properties both $Ti_2AlN$ bulk samples and a conventional Ti-6Al-4V alloy. A femto-second laser conditions were conducted at a repetition rate of 6 kHz and laser intensity of 50 %, 70% and 90 %, respectively, laser confocal microscope were used to evaluate the width and depth of ablation. Consequently, the laser ablation result of the $Ti_2AlN$ sample than that of the Ti-6Al-4V alloys show a considerably good ablation characteristics due to its higher thermal conductivity regardless of to high densification and high hardness.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.505-512
• /
• 2023

This study investigated crystal structures, microstructures, and electric-field-induced strain (EFIS) properties of Bi-based lead-free ferroelectric/relaxor composites. Bi_1/2Na_0.82K_0.18)_1/2TiO₃ (BNKT) as a ferroelectric material and 0.78Bi_1/2(Na_0.78K_0.22)_1/2TiO₃-0.02LaFeO₃ (BNKT2LF) as a relaxor material were synthesized using a conventional solid-state reaction method, and the resulting BNKT2LF powders were subjected to high-energy ball milling (HEBM) after calcination. As a result, HEBM proved a larger average grain size of sintered samples compared to conventional ball milling (CBM). In addition, the increased sintering time led to grain growth. Furthermore, HEBM treatment and sintering time demonstrated a significant effect on EFIS of BNKT/BNKT2LF composites. At 6 kV/mm, 0.35% of the maximum strain (S_max) was observed in the HEBM sample sintered for 12 h. The unipolar strain curves of CBM samples were almost linear, indicating almost no phase transitions, while HEBM samples displayed phase transitions at 5~6 kV/mm for all sintering time levels, showing the highest S_max/E_max value of 700 pm/V. These results indicated that HEBM treatment with a long sintering time might significantly enhance the electromechanical strain properties of BNT-based ceramics.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1854-1862
• /
• 2024

This study aims to investigate the strain-dependent-deformation property of Gyeongju bentonite buffer material. A series of unconfined compressive tests were performed with cylindrical specimens prepared at varying dry densities (𝜌_d = 1.58 g/cm³ to 1.74 g/cm³) using cold isostatic pressing technique. It is found that as 𝜌_d increase, the unconfined compressive strength (q_u), failure strain, and elastic modulus (E) of Gyeongju compacted bentonite (GCB) increases. Normalized elastic modulus (E_sec/E_max) degradation curves of GCB specimens are fitted using Ramberg-Osgood model and the elastic threshold strain (𝜀_e,th) is determined through the fitted curves. The strain-dependency of E and Poisson's ratio (v) of GCB were observed. E and v were measured constant below 𝜀_e,th of 0.14 %. Then, E decreases while v increases after exceeding the strain threshold. The E_sec/E_max degradation curves of GCB in this study suggests wider linear range and higher linearity than those of sedimentary clay in previous study. On top of that, the influence of 𝜌_d is observed on E_sec/E_max degradation curves of GCB, showing a slight increase in 𝜀_e,th with increase in 𝜌_d. Furthermore, an empirical model of q_u with 𝜌_d and a correlation model between q_u and E are proposed for Gyeongju bentonite buffer materials.

• Journal of applied mathematics & informatics
• /
• 제34권5_6호
• /
• pp.451-465
• /
• 2016

A Radio labeling of the graph G is a function g from the vertex set V (G) of G to ℤ⁺ such that |g(u) - g(v)| ≥ diam(G) + 1 - d_G(u, v), where diam(G) and d(u, v) are diameter and distance between u and v in graph G respectively. The radio number rn(G) of G is the smallest number k such that G has radio labeling with max{g(v) : v ∈ V(G)} = k. We investigate radio number for some families of generalized caterpillar graphs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.24-33
• /
• 2012

This paper describes a multi-mode LDPC decoder which supports 19 block lengths and 6 code rates of Quasi-Cyclic LDPC code for Mobile WiMAX system. To achieve an efficient implementation of 114 operation modes, some design optimizations are considered including block-serial layered decoding scheme, a memory reduction technique based on the min-sum decoding algorithm and a novel method for generating the cyclic shift values of parity check matrix. From fixed-point simulations, decoding performance and optimal hardware parameters are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 380,000 gates and 52,992 bits RAM, and the estimated throughput is about 164 ~ 222 Mbps at 56 MHz@1.8 V.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.513-513
• /
• 2000

An integrable circuit technique for implementing high-speed analog two-input Max/Min circuit is described. The realization method is suitable for fabrication using CMOS technology. The proposed circuit comprises a current mirror and electronic switch connected with a absolute value circuit. The maximum or minimum operation of the proposed circuit can be selected by an external control voltage. The proposed analog Max/Min circuit has a very sharp transfer characteristic and is suitable for real-time systems. Simulation results verified the circuit performances are agreed with the expected values.

• Advances in Traditional Medicine
• /
• 제4권4호
• /
• pp.227-234
• /
• 2004

An ${\alpha}-Amylase$ was purified to apparent homogeneity from germinating soybean seeds (Glycine max). Enzyme showed high specificity for starch. ${\alpha}-Amylase$ from soybean has optimum pH at 7.6 in the pH range 4.0-10.6. At this pH, the $K_m$ of starch was 2.63 mg/ml and the $V_{max}$ was equal to 52.6 mg/ml/min protein. Optimum temperature of the enzyme was found to be $55^{\circ}C,\;Q_{10}$ equal to 1.85 and energy of activation equal to 12 kcal/mol. Additives like, EDTA reduced the activity of ${\alpha}-amylase$ whereas PMSF enhanced the activity. ${\alpha}-Amylase$ was inhibited by several heavy metal ions.