• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1126-1135
• /
• 2019

From a sample of bamboo byproduct, the protease-producing yeast strain CO-1 was newly isolated. Strain CO-1 is spherical to ovoid in shape and measures $3.1-4.0{\times}3.8-4.4{\mu}m$. For the growth of strain CO-1, the optimal temperature and initial pH were $30^{\circ}C$ and 4.0, respectively. The strain was able to grow in 0.0-15.0%(w/v) NaCl and 0.0-9.0%(v/v) ethanol. Based on a phylogenetic analysis of its 18S rDNA sequences, strain CO-1 was identified as Pichia anomala. The extracellular protease produced by P. anomala CO-1 was partially purified by ammonium sulfate precipitation, which resulted in a 14.6-fold purification and a yield of 7.2%. The molecular mass of the protease was recorded as approximately 30 kDa via zymogram. The protease activity reached its maximum when 1.0%(w/v) CMC was used as the carbon source, 1.0%(w/v) yeast extract was used as the nitrogen source, and 0.3%(w/v) $MnSO_4$ was used as the mineral source. The protease revealed the highest activity at pH 7.0 and $30^{\circ}C$. This enzyme maintained more than 75% of its stability at a pH range of 4.0-10.0. After heating at $65^{\circ}C$ for 1 hr, the neutral protease registered at 60% of its original activity. The protease production coincided with growth and attained a maximal level during the post-exponential phase.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.154-159
• /
• 2007

In order to prepare liqueur of Citrus platymamma, 500 g dried peel was soaked in 10 l (5%, w/v) of $30{\sim}95%$ ethanol concentration for 70 days. Changes in pH was $5.19{\sim}4.80$ with 30% ethanol concentration, and the pH was decreased as ethanol concentration decreases for 10 days after soaking. Color a-value was decreased and color b-value was increased according to higher ethanol concentration. Extract was $2.00{\sim}2.19%$ (w/v) with $30{\sim}70%$ ethanol concentration. Acid content was $0.18{\sim}0.21%$ (v/v) with $30{\sim}70%$ ethanol concentration, while $0.13{\sim}0.15%$ (v/v) with 95% ethanol concentration. The contents of fructose and glucose was increased with lower ethanol concentration, and sucrose content was decreased with longer soaking time. Main flavonoids were narirutin, hesperidin, nobiletin, 3,5,6,7,8,3'4'-methoxylated flavone, and tangeretin. Most flavonoids were extracted more than 80% of ethanol for $3{\sim}5$ days soaking. Total polyphenol was $628.8{\sim}711.2$ ${\mu}g/ml$ with $30{\sim}70%$ ethanol concentration for 20 days soaking. Therefore, to prepare Citrus platymamma peel liqueur, it is necessary to soak the material in $50{\sim}70%$ ethanol concentration for 20 days.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.27-38
• /
• 2016

This work proposes a 12b 30MS/s 0.18um CMOS SAR ADC based on low-power composite switching with an active die area of $0.16mm^2$. The proposed composite switching employs the conventional $V_{CM}$-based switching and monotonic switching sequences while minimizing the switching power consumption of a DAC and the dynamic offset to constrain a linearity of the SAR ADC. Two equally-divided capacitors topology and the reference scaling are employed to implement the $V_{CM}$-based switching effectively and match an input signal range with a reference voltage range in the proposed C-R hybrid DAC. The techniques also simplify the overall circuits and reduce the total number of unit capacitors up to 64 in the fully differential version of the prototype 12b ADC. Meanwhile, the SAR logic block of the proposed SAR ADC employs a simple latch-type register rather than a D flip-flop-based register not only to improve the speed and stability of the SAR operation but also to reduce the area and power consumption by driving reference switches in the DAC directly without any decoder. The measured DNL and INL of the prototype ADC in a 0.18um CMOS are within 0.85LSB and 2.53LSB, respectively. The ADC shows a maximum SNDR of a 59.33dB and a maximum SFDR of 69.83dB at 30MS/s. The ADC consumes 2.25mW at a 1.8V supply voltage.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.347-348
• /
• 2015

본 논문은 30kW, 95GHz 자이로트론 구동을 위한 $25kV_{max}$, $10mA_{max}$ 출력 사양의 Body Power Supply (BPS)와 $10V_{max}$, $10A_{max}$ 사양을 가지며 50kV 절연이 요구되는 Heater Power Supply (HPS)의 설계에 관하여 기술한다. 자이로트론 구동 효율 향상에 필요한 BPS는 높은 승압비 달성 및 절연에 대한 신뢰성 확보를 위해 8개의 분리된 코어를 사용하여 변압기를 구성하고, 각 코어간의 보상권선을 이용하는 방식을 제안하여 직렬로 구성된 8개의 고전압 정류부 간의 전압 불균형 문제를 해결 한다. HPS는 50kV 전위가 인가되는 코일 가열을 위해 사용되는 전원으로 내부 고주파 변압기를 이용하여 효율적인 절연 설계를 구현한다. 30kW, 95GHz 자이로트론 구동 시스템의 신뢰성 확보와 전원장치의 높은 전력밀도 달성을 위해 두 전원장치는 공진형 컨버터 토폴로지를 기반으로 설계하고, 시뮬레이션 및 실험을 통해 개발된 전원의 우수성을 검증한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.4
• /
• pp.129-134
• /
• 2004

In this study, we investigated the effect of a nitrogen atom on the amorphization of V-Fe alloy through solid-gas reaction during mechanical alloying (MA). MA by planetary ball mill of $V_{70}Fe_{30}$ elemental powders was carried out under the nitrogen gas atmosphere. Amorphization has been observed after 160 hours of ball milling in this case. The DSC spectrum for the mechanically alloyed ($V_{70}Fe$_{30}$)_{0.89}N_{0.11}$ powders exhibits a sharp exothermic peak due to crystallization at about $600^{\circ}C$. Structural transformation from the bcc crystalline to amorphous states was also observed through X-ray and neutron diffractions. We take a full advantage of a negligibly small scattering length of the V atom in the neutron diffraction measurement. During amorphization process the octahedral unit, which is typical of a polyhedron formed in any crystal structures, was preferentially destroyed and transformed into the tetrahedral unit. Futhermore, neutron diffraction measurements revealed that a nitrogen atom is selectively situated at a center of the polyhedron formed by V atoms.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.501-505
• /
• 2021

V₂O₅-TiO₂ catalysts were prepared by various methods. V₂O₅-TiO₂ were prepared by sol-gel method with different drying conditions (aerogel and xerogel), and V₂O₅ supported on TiO₂ obtained by sol-gel method with precipitation-deposition method and impregnation method. The performance of the V₂O₅-TiO₂ catalysts was investigated for the selective oxidation of hydrogen sulfide in the stream containing both ammonia and excess water. All the catalysts showed good dispersion of vanadium and they had high H₂S conversion with no or little production of sulfur dioxide. The V₂O₅-TiO₂ aerogel catalyst prepared by sol-gel method with drying under super critical condition had the highest surface area which led to better catalytic activity compared to those by other synthesis methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1168-1173
• /
• 2005

The HVPS of the TWTA for military satellite communications is developed and tested. With 380 V input DC voltage, the HVPS provides -10.95 kV for Cathode, -4.27 kV for Collectorl and -6.57 kV for Collector2 of the TWT that generates 600 W X-band output signal power. The total output power of the HVPS is about 1.6 kW. The voltage ripples of Cathode, Collectorl and Collector2 are 6 V, 12 V and 6 V, respectively, which are only $0.055\%,\;0.281\%$ and $0.091\%$ compared to the absolute output voltages.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.114-119
• /
• 2003

The fermentative conversion of food wastes into probiotic feed was investigated by seeding of mixed inoculum of Lactobacillus acidophilus and Saccharomyces cerevisiae. After grinding finely, optimal fermentation conditions for aeration was investigated at $30^{\circ}C$, The viable cell count of lactic acid bacteria and yeast during fermentation were monitored by controlling aeration rate at each different aeration degree of 0v.v.m 0rpm, 0.25v.v.m 100rpm, 0.5v.v.m 200rpm, and 1v.v.m 500rpm respectively. The most active growth of the yeast was shown at 0.5v.v.m 200rpm as $4.5{\times}10^9CFU/m{\ell}$. By controlling aeration rate, the pH of the probiotics feed could be controlled between 4-5 for the enhancement of preservation characteristics and acceptability for cattle feeding.

• Journal of applied mathematics & informatics
• /
• v.30 no.1_2
• /
• pp.49-56
• /
• 2012

In this paper we introduce two new labelings called product antimagic labeling and total product antimagic labeling for directed graphs and show the existence of the same for Cayley digraphs of 2-generated 2-groups.