• 제목/요약/키워드: $U_3Si$

검색결과 499건 처리시간 0.027초

유역특성 변화에 따른 도시유출모형의 매개변수 민감도분석(II) -모형의 검정 및 적용- (The Sensitivity Analysis of Parameters of Urban Runoff Models due to Variations of Basin Characteristics (II) - Model Calibration and Application -)

  • 서규우;허준행
    • 한국수자원학회논문집
    • /
    • 제31권3호
    • /
    • pp.253-267
    • /
    • 1998
  • 본 연구에서는 유역의 크기와 형상 및 도시화 정도가 다른 동수천유역과 무심천의 청주 시험유역, 두 곳을 대상으로 ILLUDAS 모형과 SWMM 모형을 적용한 유출특성을 바탕으로 각 매개변수의 민간도 정도를 분석하였다. 총 유출량비는 선정 매개변수 대부분 강우지속기간과 유역면적크기에 따라서 일정한 관계가 있는 것으로 분석되었으며 강우의 시간적 분포형변화에는 관계성이 약한 것으로 분석되었다. 첨두유출량비는 ILLUDAS 모형에서는 침투능과 매개변수 모두 일정한 관계성을 갖고 선형변화하는 것으로 분석되었다. 유출민감도비는 1 이하의 값을 유지하는 것으로 나타나 첨두유출량보다 총유출량에 대한 민감도 영향이 더 큰 것으로 분석되었고, SWMM 모형의 조도계수 유출민감도비는 거의 1의 값을 갖는 것으로 분석되었다. 적용모형에서 선정된 주요 매개변수에 대해 유역면적크기별, 60,120,180분 강우지속기간별과 Huff의 4분위형별로 총유출량비, 첨두유출량비, 유출민감도비를 산정하여 도시적인 방법으로 분석하였고 민감도비율 결과를 표로 제시하였다.

  • PDF

T1영상에서 TR, TE 매개변수에 따른 Gadoteridol의 신호강도 변화 (Gadoteridol's Signal Change according to TR, TE Parameters in T1 Image)

  • 정현근;정현도;남기창;김호철
    • 전자공학회논문지
    • /
    • 제52권9호
    • /
    • pp.117-124
    • /
    • 2015
  • 본 논문에서는 조영증강 MRI 검사 시 T1 effect를 만들기 위한 물리적 매개변수 중 대표적인 TR과 TE가 가돌리늄과 결합한 $H_1$ 스핀의 신호강도에 어떤 영향을 미치는지를 정량적으로 평가 분석하고자 하였다. 이를 위해 MR 가돌리늄 조영제인 0.5 mol Gadoteridol로 제작된 MR팬텀을 이용하여 1.5T MRI 장비에서 FSE(Fast Spin Echo)시퀀스로 실험하였다. 이때 FSE 매개변수 중 TR과 TE의 값들을 서로 달리하였다. 이 때 TR 수치는 각각 200, 250, 300, 350, 400, 450, 500, 550, 600 msec, TE는 6.2, 12.4, 18.6, 21.6 msec로 임상적인 T1 effect를 구현하는데 있어 매개변수 값이 물리적으로 벗어나지 않는 범위 내에서 설정하였고, TR, TE가 서로 교차되어 실험되었다. 획득된 영상 데이터를 통해 신호강도 변화를 측정 한 후 이를 분석하였다. 이 때 조영증강 반응시작 지점인 RSP(Reaction Starting Point)는 TR과는 무관하게 TE 6.2 msec에서 100 mmol, TE 12.4 msec에서 50 mmol, TE 18.6 msec에서 40mmol, TE 21.6 msec에서 30 mmol을 나타내었다. 최대 신호강도인 MPSI(Max Peak Signal Intensity)는 TR 200 msec에서는 TE모두 4mmol에서 형성되었고, TR 250에서 600 msec까지는 모두 4, 2, 1, 0.8, 0.6 mmol의 저 농도 영역으로 피크치가 지연되었다. 반응면적인 RA(Reaction Area)는 TR 200-600 msec에서 각각 21183.2, 21536.6, 21875.9, 22114.3, 22419.1, 22895.8, 23208.6, 23189.1, 23210.4 [a.u]로 TE 6.2 msec일 때 가장 수치가 높았다. 본 연구를 통하여 가돌리늄 조영증강 정도는 MR매개변수에 의해 조정 가능하다는 것을 알 수 있었고, 이는 실제 임상에서의 T1 조영증강 검사에 있어서 본 연구의 정량적 데이터를 통하여 진단학적으로 효율적인 TR, TE 매개변수 값으로 활용할 수 있을 것으로 사료된다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

클로미펜에 얇은 자궁내막을 보이는 환자에서 성선자극호르몬 병합 과배란유도시 클로미펜과 레트로졸의 임상적 효용성 (Clinical Efficacy of Clomiphene Citrate and Letrozole Combined with Gonadotropins for Superovulation in Patients with Clomiphene-Induced Thin Endometrium)

  • 이은주;박현종;양효인;이경은;서석교;김혜연;조시현;최영식;이병석;박기현;조동제
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제36권2호
    • /
    • pp.111-119
    • /
    • 2009
  • 목 적: 클로미펜을 사용한 배란유도시 얇은 자궁내막을 보였던 환자들에서 성선자극호르몬에 클로미펜 또는 레트로졸을 병합 투여하는 과배란유도 방법의 임상적 효용성을 비교 분석하고자 하였다. 연구방법: 이전의 클로미펜을 사용한 배란유도 주기에서 8 mm 미만의 얇은 자궁내막을 보였던 불임 환자들에서 시행된 성선자극호르몬 병합 과배란유도/인공수정 51주기가 연구에 포함되었다. 월경주기 제3일째부터 5일 동안 클로미펜+성선자극호르몬 군은 일일 클로미펜 100 mg을 투여하였고 (n=26) 레트로졸+성선자극호르몬 군은 일일 레트로졸 2.5 mg 또는 5 mg을 투여하였다 (n=25). 양 군에서 월경주기 제5~7일째부터 우성난포의 크기가 18 mm 이상에 도달할 때까지 이틀에 한 번씩 성선자극호르몬은 75~150 IU를 투여하였다. 양 군에서 성선자극호르몬 총 사용량, 자궁내막의 두께, 자궁내막의 형태, hCG 투여일의 14 mm 이상 난포의 수, hCG 투여일, 임신율, 다태 임신율을 비교하였으며 통계 분석은 Mann-Whitney U test or Fisher's exact test 등을 이용하였다. 결 과: 연령, 불임기간, 이전 인공수정 횟수, 기저 혈중 LH, FSH, $E_2$ 농도, 불임의 원인 등의 임상적 특성은 양 군간 차이가 없었다. 성선자극호르몬 병합 과배란유도시 배란전 자궁내막의 두께는 이전의 클로미펜을 사용한 주기와 비교하여 유의하게 증가되었다. 성선자극호르몬 총 사용량, hCG 투여일, 자궁내막의 삼중선 비율, 임신율 및 다태 임신율은 유의한 차이가 없었다. 클로미펜+성선자극호르몬 군에 비하여 레트로졸+성선자극호르몬 군에서 14 mm 이상 난포의 개수는 유의하게 적었고 ($3.7{\pm}1.7$ vs. $2.8{\pm}1.7$, p=0.03). 배란 전 자궁내막 두께는 유의하게 두꺼웠다 ($7.7{\pm}1.5\;mm$ vs. $9.1{\pm}1.7\;mm$, p<0.05). 결 론: 배란유도를 위하여 클로미펜 사용시 얇은 자궁내막을 보였던 환자들에서 인공수정을 위한 과배란유도시클로미펜 또는 레트로졸을 성선자극호르몬과 병합하여 사용하는 방법은 클로미펜의 자궁내막에 대한 부정적인 효과를 피할 수 있는 것으로 사료된다. 적절한 자궁내막의 발달 및 적절한 난포의 성장 측면에서 성선자극호르몬에 레트로졸을 병합하는 과배란유도 방법이 클로미펜을 병합하는 방법에 비하여 더 유용할 수 있으나 추가적인 대규모 전향적 연구가 필요할 것으로 사료된다.

야간 역전조건 하의 지표기온 경시변화 추정 (Estimation of Temporal Surface Air Temperature under Nocturnal Inversion Conditions)

  • 김수옥
    • 한국농림기상학회지
    • /
    • 제19권3호
    • /
    • pp.75-85
    • /
    • 2017
  • 청명미풍 조건에서 기온역전층 높이와 기온역전강도의 매시 변화를 정량적인 경험식으로 나타내어 야간의 매시 기온을 추정하는 방법을 고안하였다. 2007년 5월부터 2008년 3월까지 강원도 평창군 대관령면 고령지농업연구소에서 초단파 온도 프로파일러 (Model MTP5H)로 지면으로부터 높이 600m까지 50m 간격의 기온 연직 분포를 한 시간 간격으로 측정하였다. 연직기온에서 가장 기온이 높은 고도를 기온역전층 높이로, 역전층의 기온과 지면 위 100m의 기온 편차를 역전강도로 간주하고 야간 동안 시간에 따라 기온 역전층이 발달되는 정도를 모의하는 추정식을 작성하였다. 산사면에서 작물이 실제 경험하는 기온을 추정하기 위해 2014년 10월부터 2015년 11월 23일까지 전남 구례군과 광양시 사이의 중대리 계곡에서 사면의 고도별 기온을 수집하여 연직기온의 역전층 높이 및 역전강도 추정모수를 보정하였다. 지리산 남쪽의 집수역 3개 내에 구축된 검증관측망으로부터 2015년 한 해 동안의 기상자료를 수집하였고, 기상청 방재 및 종관기상관측망으로부터 배경기온을 제작, 기온감률과 함께 기온역전 조건하의 매시 기온을 추정한 다음 검증을 실시하였다. 그 결과, 청명미풍 조건에 대해 19지점 평균 ME $-0.69^{\circ}C$, 평균 RMSE $1.61^{\circ}C$이었고 2000-0100 시간대에서 과소추정오차가 증가되었다. 기존에 사용되어 왔던 최저기온 모형으로 0600 기온을 추정하고 새로운 모의 방법으로 산출된 결과와 추정 오차를 비교한 결과, 평균 ME는 기존 $-0.86^{\circ}C$에서 $-0.12^{\circ}C$로, 평균 RMSE는 $1.72^{\circ}C$에서 $1.34^{\circ}C$로 개선되었다. 청명미풍 조건에서 도출된 기온 추정식의 활용도를 높이기 위해서는 추정 오차를 개선하고 다양한 기상조건에 대한 영향을 반영하는 후속 연구가 필요하다.

풋고추 농약다성분분석 정도관리용 분석표준물질 개발 (Development of Analytical Reference Material for Proficiency Test of Pesticide Multi-residue Analysis in Green-pepper)

  • 김종환;최성길;오영곤;권영상;홍수명;성문현;이세자;황선영;서종수
    • 농약과학회지
    • /
    • 제20권3호
    • /
    • pp.211-220
    • /
    • 2016
  • 본 연구는 풋고추 시료를 이용하여 농약다성분 분석표준물질을 개발하기 위해 수행하였다. 10종의 농약성분을 풋고추 시료에 처리하여 균질하게 분포될 수 있도록 조제하였으며, 국제적인 지침서인 'ISO Guide 35', 'ISO Guide 13528' 그리고 'EURL-PT'에서 요구하는 균질성, 안정성, 인증값 및 표준불확도가 확립된 농약다성분 풋고추 분석표준물질을 개발하였다. 개발된 분석표준물질의 병간 표준편차와 병내 표준편차는 인증값의 1.7~3.7%로 매우 우수한 균질성을 나타냈으며, 불균질성에 의한 표준불확도는 인증값의 0.8~1.15% 매우 낮아 분석표준물질로 사용하기에 매우 적합하였다. 다양한 조건에서의 안정성을 확인한 결과, 실온 $20{\sim}30^{\circ}C$)에서는 7일, 냉동($-20^{\circ}C$)에서는 30일 동안 안정하였으며, 초저온 상태($-80^{\circ}C$)에서는 bifenthrin, Fenpropathrin을 제외한 8종이 245일 동안 안정하였다. 개발된 농약다성분 풋고추 분석표준물질을 사용하여 잔류농약을 분석하는 8기관의 시험소를 평가한 결과, 일부기관에서는 6성분을 검출하지 못하였으며 일부 농약성분에 대해서는 의심스러운(questionable) 또는 부적합(unacceptable)의 평가를 받았다. 동일한 분석표준물질에 대해서 각 기관마다 분석결과의 차이가 나타나는 것을 확인하였으며, 이런 결과를 통해서 잔류농약의 분석결과 신뢰성과 일관성을 향상시키기 위해 풋고추 분석표물질을 활용한 정도관리 또는 숙련도 평가시험이 필요할 것으로 보인다.

지하수 관개에 의한 수도의 멸준양상과 그 방지책에 관한 연구 (Studies on the Rice Yield Decreased by Ground Water Irrigation and Its Preventive Methods)

  • 한욱동
    • 한국농공학회지
    • /
    • 제16권1호
    • /
    • pp.3225-3262
    • /
    • 1974
  • The purposes of this thesis are to clarify experimentally the variation of ground water temperature in tube wells during the irrigation period of paddy rice, and the effect of ground water irrigation on the growth, grain yield and yield components of the rice plant, and, furthermore, when and why the plant is most liable to be damaged by ground water, and also to find out the effective ground water irrigation methods. The results obtained in this experiment are as follows; 1. The temperature of ground water in tube wells varies according to the location, year, and the depth of the well. The average temperatures of ground water in a tubewells, 6.3m, 8.0m deep are $14.5^{\circ}C$ and $13.1^{\circ}C$, respercively, during the irrigation period of paddy rice (From the middle of June to the end of September). In the former the temperature rises continuously from $12.3^{\circ}C$ to 16.4$^{\circ}C$ and in the latter from $12.4^{\circ}C$ to $13.8^{\circ}C$ during the same period. These temperatures are approximately the same value as the estimated temperatures. The temperature difference between the ground water and the surface water is approximately $11^{\circ}C$. 2. The results obtained from the analysis of the water quality of the "Seoho" reservoir and that of water from the tube well show that the pH values of the ground water and the surface water are 6.35 and 6.00, respectively, and inorganic components such as N, PO4, Na, Cl, SiO2 and Ca are contained more in the ground water than in the surface water while K, SO4, Fe and Mg are contained less in the ground water. 3. The response of growth, yield and yield components of paddy rice to ground water irrigation are as follows; (l) Using ground water irrigation during the watered rice nursery period(seeding date: 30 April, 1970), the chracteristics of a young rice plant, such as plant height, number of leaves, and number of tillers are inferior to those of young rice plants irrigated with surface water during the same period. (2) In cases where ground water and surface water are supplied separately by the gravity flow method, it is found that ground water irrigation to the rice plant delays the stage at which there is a maximum increase in the number of tillers by 6 days. (3) At the tillering stage of rice plant just after transplanting, the effect of ground water irrigation on the increase in the number of tillers is better, compared with the method of supplying surface water throughout the whole irrigation period. Conversely, the number of tillers is decreased by ground water irrigation at the reproductive stage. Plant height is extremely restrained by ground water irrigation. (4) Heading date is clearly delayed by the ground water irrigation when it is practised during the growth stages or at the reproductive stage only. (5) The heading date of rice plants is slightly delayed by irrigation with the gravity flow method as compared with the standing water method. (6) The response of yield and of yield components of rice to ground water irrigation are as follows: \circled1 When ground water irrigation is practised during the growth stages and the reproductive stage, the culm length of the rice plant is reduced by 11 percent and 8 percent, respectively, when compared with the surface water irrigation used throughout all the growth stages. \circled2 Panicle length is found to be the longest on the test plot in which ground water irrigation is practised at the tillering stage. A similar tendency as that seen in the culm length is observed on other test plots. \circled3 The number of panicles is found to be the least on the plot in which ground water irrigation is practised by the gravity flow method throughout all the growth stages of the rice plant. No significant difference is found between the other plots. \circled4 The number of spikelets per panicle at the various stages of rice growth at which_ surface or ground water is supplied by gravity flow method are as follows; surface water at all growth stages‥‥‥‥‥ 98.5. Ground water at all growth stages‥‥‥‥‥‥62.2 Ground water at the tillering stage‥‥‥‥‥ 82.6. Ground water at the reproductive stage ‥‥‥‥‥ 74.1. \circled5 Ripening percentage is about 70 percent on the test plot in which ground water irrigation is practised during all the growth stages and at the tillering stage only. However, when ground water irrigation is practised, at the reproductive stage, the ripening percentage is reduced to 50 percent. This means that 20 percent reduction in the ripening percentage by using ground water irrigation at the reproductive stage. \circled6 The weight of 1,000 kernels is found to show a similar tendency as in the case of ripening percentage i. e. the ground water irrigation during all the growth stages and at the reproductive stage results in a decreased weight of the 1,000 kernels. \circled7 The yield of brown rice from the various treatments are as follows; Gravity flow; Surface water at all growth stages‥‥‥‥‥‥514kg/10a. Ground water at all growth stages‥‥‥‥‥‥428kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥430kg/10a. Standing water; Surface water at all growh stages‥‥‥‥‥‥556kg/10a. Ground water at all growth stages‥‥‥‥‥‥441kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥450kg/10a. The above figures show that ground water irrigation by the gravity flow and by the standing water method during all the growth stages resulted in an 18 percent and a 21 percent decrease in the yield of brown rice, respectively, when compared with surface water irrigation. Also ground water irrigation by gravity flow and by standing water resulted in respective decreases in yield of 16 percent and 19 percent, compared with the surface irrigation method. 4. Results obtained from the experiments on the improvement of ground water irrigation efficiency to paddy rice are as follows; (1) When the standing water irrigation with surface water is practised, the daily average water temperature in a paddy field is 25.2$^{\circ}C$, but, when the gravity flow method is practised with the same irrigation water, the daily average water temperature is 24.5$^{\circ}C$. This means that the former is 0.7$^{\circ}C$ higher than the latter. On the other hand, when ground water is used, the daily water temperatures in a paddy field are respectively 21.$0^{\circ}C$ and 19.3$^{\circ}C$ by practising standing water and the gravity flow method. It can be seen that the former is approximately 1.$0^{\circ}C$ higher than the latter. (2) When the non-water-logged cultivation is practised, the yield of brown rice is 516.3kg/10a, while the yield of brown rice from ground water irrigation plot throughout the whole irrigation period and surface water irrigation plot are 446.3kg/10a and 556.4kg/10a, respectivelely. This means that there is no significant difference in yields between surface water irrigation practice and non-water-logged cultivation, and also means that non-water-logged cultivation results in a 12.6 percent increase in yield compared with the yield from the ground water irrigation plot. (3) The black and white coloring on the inside surface of the water warming ponds has no substantial effect on the temperature of the water. The average daily water temperatures of the various water warming ponds, having different depths, are expressed as Y=aX+b, while the daily average water temperatures at various depths in a water warming pond are expressed as Y=a(b)x (where Y: the daily average water temperature, a,b: constants depending on the type of water warming pond, X; water depth). As the depth of water warning pond is increased, the diurnal difference of the highest and the lowest water temperature is decreased, and also, the time at which the highest water temperature occurs, is delayed. (4) The degree of warming by using a polyethylene tube, 100m in length and 10cm in diameter, is 4~9$^{\circ}C$. Heat exchange rate of a polyethylene tube is 1.5 times higher than that or a water warming channel. The following equation expresses the water warming mechanism of a polyethylene tube where distance from the tube inlet, time in day and several climatic factors are given: {{{{ theta omega (dwt)= { a}_{0 } (1-e- { x} over { PHI v })+ { 2} atop { SUM from { { n}=1} { { a}_{n } } over { SQRT { 1+ {( n omega PHI) }^{2 } } } } LEFT { sin(n omega t+ { b}_{n }+ { tan}^{-1 }n omega PHI )-e- { x} over { PHI v }sin(n omega LEFT ( t- { x} over {v } RIGHT ) + { b}_{n }+ { tan}^{-1 }n omega PHI ) RIGHT } +e- { x} over { PHI v } theta i}}}}{{{{ { theta }_{$\infty$ }(t)= { { alpha theta }_{a }+ { theta }_{ w'} +(S- { B}_{s } ) { U}_{w } } over { beta } , PHI = { { cpDU}_{ omega } } over {4 beta } }}}} where $\theta$$\omega$; discharged water temperature($^{\circ}C$) $\theta$a; air temperature ($^{\circ}C$) $\theta$$\omega$';ponded water temperature($^{\circ}C$) s ; net solar radiation(ly/min) t ; time(tadian) x; tube length(cm) D; diameter(cm) ao,an,bn;constants determined from $\theta$$\omega$(t) varitation. cp; heat capacity of water(cal/$^{\circ}C$ ㎥) U,Ua; overall heat transfer coefficient(cal/$^{\circ}C$ $\textrm{cm}^2$ min-1) $\omega$;1 velocity of water in a polyethylene tube(cm/min) Bs ; heat exchange rate between water and soil(ly/min)

  • PDF

<황제내경(黃帝內經)>에 유입(流入)된 오행학설(五行學說)에 관(關)한 연구(硏究) (A STUDY ON THE FIVE ELEMENT THEORY INTODUCED )

  • 김부환;박현국
    • 동국한의학연구소논문집
    • /
    • 제1권
    • /
    • pp.161-191
    • /
    • 1992
  • The purpose of this study is how have the form and theory of the five element theory in the (黃帝內徑) by the investigation of the course of the course of the five element introduced the ancient oriental medicine from ancient oriental philosophy. The following results were obtained. 1. The five elements in (尙書) meaned the uses of water, fire, earth, wood, metal which were important in living. Because these had very important meaning in ancient political and economic society, emphasized to big law(洪範) 2. The five elements in (左傳) and (國語) mean the five uses too, and there are the phases of "five win metal"(火勝金) and "wather win fire"(水勝火), but these only meaned the physical interrelation. 3. In the five circulating factor theory made by Chu Yen(鄒衍) which have the attribute of the five elements, he more reasonably had argued human affairs like that a dynasty become different in step with the circulating five favors. There is the regular annual policy in the (呂氏春秋) which closely connected nature and human living, and attached the various colors, animals, visceras, flavors, sounds, the sexagenary cycle and so on to the five elements. 4. In the (春秋繁露) writed in fore-period of Han(漢) dynasty, the interactions of the five elements are concretely applicated to policy, Dong Jung Soe(童仲舒) had discrived the interactions of the five elements by Dong Lyu Sang Dong theory(同類相動說) and the misfortune theory(災異說), emphasized the sympathy of nature and human. Thought there is many content which are superstitious and contradictory, I concider which that affcted many effects in the formation of five element theory of oriental medicine. In the (淮南子) the order of matters were explained by the five element theory too, as the interrelations of the five elements were explained by the sexagenary ctcle, I assume that the bud of O-Un theory(五運理論). And there was not founded the fullscale intriduction of the five element theory in the Ma Wang Tye(馬王堆) excavated finds, the Mu Yyi medical writings formed the dynasty(武威漢代醫簡) and the documents about Pyun Jak(偏鵲) and Sun U Ie(淳于意). 5. The application of the five element theory in the (Whang Di Nei Qing) (黃帝內徑) is devided into the attachement to the five elements, the interelations of the five elments, and Un Gi theery(運氣論). In the attachment to the five elemeant theory, it made the attachment of the five viseras of (今文尙書) party a standard and attached the sections of a human body, the whole internal organs of sense, the five colors, the five flavors and the five sounds and so on to the five elements. It put to use by means of the apllivation of the interrelation of the five elements in the transferations of the diseases and the relative severeness of a disease in step with change of time and season. Un Gi theory(運氣論) which synthesized by the attachment to the five elements, the inter-relations of the five elements and the climate which observerd from ancient times systematically argued the effects of weather to human. 6. The application of the five elements theory in (黃帝內徑) have the significant what had get rid of irrational factors like that the emotion and action of human could to influense the weather, what had been formes more rational thingking by the obesrvation of human and nature. It is required more reserches about the possibility of the formation of the doctrinal faction bt the geographical effect of the Yon, Je(燕,薺) region, the application of the five element theory in other ancient medical books and the relationship of the five element theory and Yin Yang(陰陽)

  • PDF

초유폭약류(硝油爆藥類)를 활용(活用)한 단일자유면발파(單一自由面發破)의 역학적(力學的) 연구(硏究) (Dynamical Study on the Blasting with One-Free-Face to Utilize AN-FO Explosives)

  • 허전
    • 자원환경지질
    • /
    • 제5권4호
    • /
    • pp.187-209
    • /
    • 1972
  • 발파(發破)에 있어서 천공배치(穿孔配置)는 발파효과에 영향(影響)을 미치는 가장 중요(重要)한 요소중(要素中)의 하나다. Burn-cut 의 폭발(爆發)의 여러 요소(要素)에 관(關)한 연구(硏究)는 Brown, Cook에 의(依)해 발표(發表)된 바 있으나 본연구(本硏究)에 있어서는 Burn-cut 와 Pyramid-cut의 천공배치(穿孔配置)의 대비(對比)와 폭원(爆源)과 자유면(自由面)사이의 역학적(力學的) 응력해석(應力解析)에 중점(重點)을 두어 이등교수(伊藤敎授)가 전개(展開)한 이론(理論)에서 다루지 않은 주정천공배치(週正穿孔配置)에 의(依)한 Burn-cut의 효과을 연결(連結)시켰다. 종래(從來)의 이론(理論)에 의(衣)하면 단일자유면발파(單一自由面發破)에 있어서는 압축응력외(壓縮應力外)에 자유면(自由面)에서 반사(反射)되는 인장응력(引張應力)의 영향(影響)을 추가(追加)로 받는다. 본(本) 신천공(新穿孔) 배치(配置)에 의(依)한 Burn-cut는 자유면수(自由面數)의 증가(增加)와 거리(距離)의 축소(縮少)를 꾀하므로서 이효과(效果)는 더욱 증대(增大)된다. 이와 같은 효과를 위(爲)해서는 다음 두가지 점(點)을 고려해야 한다. 첫째 심기공(心技孔)의 무장약공(無裝藥孔)은 보조응력(補助應力)을 크게 하기위(爲)해 가능(可能)한 대구경(大口徑)으로 깊게 천공(穿孔)해야 한다. 둘째 각 심기공간(心技孔間)의 거리(距離)를 접근(接近)시켜 완전(完全) 발파(發破)를 기(期)해야 한다. 그 까닭은 구경(口徑)이 증가(增加)됨에 따라 2차(次) 자유면(自由面)은 넓어지고 거리가 가까울수록 장약공(裝藥孔)과 무장약공(無裝藥孔)사이의 인장응력(引張應力)은 더욱 발달(發達)되기 때문이다. 선진국(先進國)에서는 심기공(心技孔)사이의 거리(距離)를 4"로 함이 이상적(理想的)이라고 알려지고 있으나 본실험(本實驗)에 의(依)하면 더 욱 근접(近接)될수록 파괴암석(破壞岩石)이 증가(增加)되고 굴진장(掘進長)도 깊어짐이 밝혀졌다. 나아가서는 굴진장(掘進長)을 더욱 증대(增大)시키기 위(爲)해 Burn-cut로 부터 Large hole Burn-cut를 개발(開發)하여 발파회수(發破回數) max 7회(回)/일(日)로서 1발파당(發破當) 3.1m까지 시도(試圖)함으로서 고속도굴진(高速度掘進)의 기원(起源)을 마련했다. 또한 대구경(大口徑) Burn-cut에서는 큰 저항(抵抗)을 극복하기 위해 금속초유폭약(金屬硝油爆藥)을 사용(使用)함이 더욱 효과적(效果的)임이 입증(立證)됐다. 최근(最近)에 와서 저렴(低廉)한 가격(價格)과 취급안전(取扱安全)으르 각광을 받고있는 AN-FO는 비료용 또는 공업용(工業用) 초안(硝安)에 연료유(燃料油)를 혼합(混合)한 것으로서 외관(雷管)만으로는 순감(純感)하여 폭발(爆發)하지 않으나 Gelatin Dynamite등(等)의 폭발성(爆發性) 예감제(銳感劑)에 의(依)해 발파공내(發破孔內)에서 일단 기폭(起爆)되면 종래(從來)의 초안폭약(硝安爆藥)에 상당(相當)한 위력(威力)을 발휘(發揮)케 한다. AN-FO 폭제(爆劑)의 성능(性能)에 관(關)해서는 많은 보고(報告)가 있었으나 본(本) 실험(實驗)에 의(依)하면 초유혼합비(硝油混合比)는 분상(粉狀)은 93.5:6.5, prill상(狀)은 94:6이 최적(最適)이며 분상(粉狀) AN-FO는 prill상(狀) AN-FO보다 항상(恒常) 폭속(爆速)이 높다. 또한 기폭감도(起爆感度), 충격감도(衝擊感度), 진거감도(塵據感度) 등(等) 제감도(諸感度)는 타화약(他火藥)에 비(比)해 몹시 경감(鏡感)하며 전폭성(傳爆性)은 prill상(狀)이 분상(粉狀)보다 우수(優秀)함을 얻었다. 발파후(發破後) Gas도 양호(良好)하며 AN-FO는 제조후(製造後) 7일(日) 전후(前後)가 최대효과를 갖는다. 종래(從來) AN-FO는 지난 여러해 동안 로천굴(露天掘)에만 사용(使用)하여 왔으나 필자(筆者)는 AN-FO의 기초성능시험(基礎性能試驗)을 토대(土臺)로 이를 이용(利用)한 신종폭제(新種爆劑)로서 금속초유폭약(金屬硝油爆藥)과 수중폭약(水中爆藥)을 발전(發展)시켰다. 금속초유(金屬硝油)의 폭약(爆藥)은 AN-FO와 Al 금속분말의 혼합물(混合物)이며 수중폭약(水中爆藥)은 종래폭약(從來爆藥)과 AN-FO로 제조(製造)한 바 이에 관(關)해서는 다른 논문(論文)에 기술(記述)했다. 본(本) 연구(硏究)에 있어서는 단일자유면(單一自由面) 발파(發破)에 있어서 격유폭약류(隔油爆藥類)를 사용(使用)한바 그 효과(效果)가 매우 양호(良好)하였음을 확인(確認)하였다.

  • PDF