• Korean Journal of Materials Research
• /
• v.32 no.9
• /
• pp.384-390
• /
• 2022

A spin coating process for RRAM, which is a TiN/TiO₂/FTO structure based on a PTC sol solution, was developed in this laboratory, a method which enables low-temperature and eco-friendly manufacturing. The RRAM corresponds to an OxRAM that operates through the formation and extinction of conductive filaments. Heat treatment was selected as a method of controlling oxygen vacancy (V_O), a major factor of the conductive filament. It was carried out at 100 ℃ under moisture removal conditions and at 300 ℃ and 500 ℃ for excellent phase stability. XRD analysis confirmed the anatase phase in the thin film increased as the heat treatment increased, and the Ti³⁺ and OH- groups were observed to decrease in the XPS analysis. In the I-V analysis, the device at 100 ℃ showed a low primary SET voltage of 5.1 V and a high ON/OFF ratio of 10⁴. The double-logarithmic plot of the I-V curve confirmed the device at 100 ℃ required a low operating voltage. As a result, the 100 ℃ heat treatment conditions were suitable for the low voltage driving and high ON/OFF ratio of TiN/TiO₂/FTO RRAM devices and these results suggest that the operating voltage and ON/OFF ratio required for OxRAM devices used in various fields under specific heat treatment conditions can be compromised.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.46-52
• /
• 1992

$TiO_2/SO_4{^{2-}}$ was prepared by precipitation from the mixed solution of titanium chloride and hydrochloric acid followed by modification with sulfuric acid. The characterization of prepared catalyst was performed by using IR, XPS, XRD and DT-TGA. Infrared spectra of $TiO_2/SO_4{^{2-}}$ showed bidentate sulfate ion coordinated to the surface of $TiO_2$. The acid strength of modified catalyst was at least $H_0{\leq}-14.52$, showing the superacidic properties which are attributed to the double bond nature of S=O of the complex formed by the interaction of $TiO_2$ with sulfate ion. For $TiO_2/SO_4{^{2-}}$, the specific surface area increased and the transition from the amorphous to anatase phase occurred at a higher temperature, as compared with pure $TiO_2$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.293-298
• /
• 1996

Room temperature Li+ ion conductivities of Li3xLa(2/3-x)TiO3 system with x=0.117~0.317 were measured by complex impedance method. ICP, SEM and XRD analysis were conducted to study the main factor which influence the Li+ ion conductivity. Li+ ion conductivity seems to have a close relationship with the crystal structure of primitive cell increase as the primitive cell as close to cubic.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.141-147
• /
• 2005

Nanomaterial $TiO_2-SiO_2$ was synthesized by hydrolysis and condensation process using 2-propanol(2-PrOH) and was characterized by FT-IR, DSC, XRD and FE-SEM. FT-IR spectra were measured to investigate Ti-0-Si absorption peak. DSC thermal analysis results appllied to Ozawa equation were used to calculate to activation energy of crystallization. It was found that the changes of X-ray diffraction patterns and FWHM obtained XRD measurement depended on calcination temperature. In FE-SEM analysis, particle size changed by quantity changes of Ti-alkokide.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.61-69
• /
• 2004

The microwave dielectric properties and microstructures of the Complex Perovskite (1-x)$(Li_{1/2}Sm_{1/2})TiO_3-x (Na_{1/2}Sm_{1/2})TiO_3$(LNST) system were investigated using the X-ray diffraction (XRD) and scanning electron microscopy (SEM). LNST had not only the antiphase tilting of oxygen octahedron but also the inphase tilting of oxygen octahedron and the antiparallel shift of cations. Also, when $0.0{\leq}x{\leq}0.4$, LNST had the vacancy ordering of A-sites because of the evaporation of Li ions. From the observation of the microstructure, abnormal grain growth phenomena were observed over the whole range of x. The temperature coefficient of resonant frequency ($T_{cf}$) of the $({Li_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(LST) system has a large negative value ($-220ppm/^{\circ}C$) but the $({Na_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(NST) system which substituted $Na^{+1}$ has a large positive value ($+173ppm/^{\circ}C$). The dielectric properties of ${\varepsilon}_r=103,\;Q*f_{0}=3,700GHz$ and $T_{cf}=+50ppm/^{\circ}C$ at 4GHz were obtained when x =0.4.

• Journal of Powder Materials
• /
• v.28 no.5
• /
• pp.423-428
• /
• 2021

Here, we report the development of a new and low-cost core-shell structure for lithium-ion battery anodes using silicon waste sludge and the Ti-ion complex. X-ray diffraction (XRD) confirmed the raw waste silicon sludge powder to be pure silicon without other metal impurities and the particle size distribution is measured to be from 200 nm to 3 ㎛ by dynamic light scattering (DLS). As a result of pulverization by a planetary mill, the size of the single crystal according to the Scherrer formula is calculated to be 12.1 nm, but the average particle size of the agglomerate is measured to be 123.6 nm. A Si/TiO₂ core-shell structure is formed using simple Ti complex ions, and the ratio of TiO₂ peaks increased with an increase in the amount of Ti ions. Transmission electron microscopy (TEM) observations revealed that TiO₂ coating on Si nanoparticles results in a Si-TiO₂ core-shell structure. This result is expected to improve the stability and cycle of lithium-ion batteries as anodes.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.26-33
• /
• 2002

Ultimate objective of industrial hygiene is the prevention of health impairment that may result from exposure to chemicals at workplace. Workers in solvent thinner-using occupation environment may be highly exposed to VOCs (volatile organic compounds) because solvent thinner has been used extensively such as painting, spraying, degreasing, coating and so on in Korea. The purpose of this study was to recognize, evaluate, and propose the control methods of VOCs from solvent thinner-using workplace. Five target volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, and m-xylene) were monitored in H company of Shiwa Industrial Complex and analyzed in perosnal, occupational indoor and outdoor during working hours simultaneously. Engineering control such as local ventilation should be made in considering the long-term exposure, though measured VOCs concentration did not exceed the workplace exposure standards. In addition, air cleaning device should be installed in local ventilation because Shiwa Industrial Complex has had the serious ambient air pollution. Currently, environmental purification using $TiO_2$ photocatalyst have attracted a great deal of attention with increasing number of recent environmental problems. In this study, $TiO_2$ sol coated on the ceramic bead was prepared by sol-gel method and the photodegradation of target compounds was investigated in gas phase by the exposure to UV-A lamp(365nm) in a batch system.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.11a
• /
• pp.459-460
• /
• 2004

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.95-98
• /
• 2007

In this paper, we make an analysis of electromagnetic wave absorption properties of $TiO_2$ in W-band. Therefore, we fabricated some samples in different composition ratio of $TiO_2$ and CPE. And the material properties of samples are calculated from S-parameter of samples using $\ell-2\ell$ method. We analyze absorption properties and complex relative permittivitis of samples. As a result, it has verified that absorption properties of sample containing $TiO_2:CPE=70:30wt.%$ have been excelled in W-band.

• Journal of Powder Materials
• /
• v.15 no.1
• /
• pp.13-17
• /
• 2008

Visible-light responsive $TiO_2$:Zr, N powders were prepared by polymer complex solution method and the particle properties were characterized by using transmission electron microscope, BET method, X-ray diffractometer and UV-Vis spectrophotometer. The photocatalytic reactivity of the catalysts was also estimated by analyzing NO degradation. Polyhedral $TiO_2$ powder having about 20 um in the average particle diameter was successfully prepared, The XRD analysis revealed that the as-prepared powder consisted of anatase and rutile phases. The light absorption of the as-prepared $TiO_2$:Zr, N powder was shifted to the visible light. In addition, the as-prepared $TiO_2$:Zr, N nanoparticles showed the higher photocatalytic activity than the commercial $TiO_2$ under both UV and visible lights.