• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.116-116
• /
• 1993

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.2
• /
• pp.65-68
• /
• 2005

The effect of crystal orientation and microstructure on the mechanical properties of $TaN_x$ was investigated. $TaN_x$ films were grown on $SiO_2$ substrates by ultrahigh vacuum unbalanced magnetron sputter deposition in mixed $Ar/N_2$ discharges at 20 mTorr (2.67 Pa) and at $350^{\circ}C$. Unlike the Ti-N system, in which TiN is the terminal phase, a large number of N-rich phases in the Ta-N system could lead to layers which had nano-sized lamella structure of coherent cubic and hexagonal phases, with a correct choice of nitrogen fraction in the sputtering mixture and ion irradiation energy during growth. The preferred orientations and the micro-structure of $TaN_x$ layers were controlled by varing incident ion energy $E_i\;(=30eV\~50eV)$ and nitrogen fractions $f_{N2}\;(=0.1\~0.15)$. $TaN_x$ layers were grown on (0002)-Ti underlayer as a crystallographic template in order to relieve the stress on the films. The structure of the $TaN_x$ film transformed from Bl-NaCl $\delta-TaN_x$ to lamellar structured Bl-NaCl $\delta-TaN_x$ + hexagonal $\varepsilon-TaN_x$ or Bl-NaCl $\delta-TaN_x$ + hexagonal $\gamma-TaN_x$ with increasing the ion energy at the same nitrogen fraction $f_{N2}$. The hardness of the films also increased by the structural change. At the nitrogen fraction of $0.1\~0.125$, the structure of the $TaN_x$ films was changed from $\delta-TaN_x\;+\;\varepsilon-TaN_x\;to\;\delta-TaN_x\;+\;\gamma-TaN_x$ with increasing the ion energy. However, at the nitrogen fraction of 0.15 the film structure did not change from $\delta-TaN_x\;+\;\varepsilon-TaN_x$ over the whole range of the applied ion energy. The hardness increased significantly from 21.1 GPa to 45.5 GPa with increasing the ion energy.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.32-38
• /
• 2017

Insulating $TaN_x$ films were grown by plasma enhanced atomic layer deposition using butylimido tris dimethylamido tantalum and $N_2+H_2$ mixed gas as metalorganic source and reactance gas, respectively. Crossbar devices having a $Pt/TaN_x/Pt$ stack were fabricated and their electrical properties were examined. The crossbar devices exhibited temperature-dependent nonlinear I (current) - V (voltage) characteristics in the temperature range of 90-300 K. Various electrical conduction mechanisms were adopted to understand the governing electrical conduction mechanism in the device. Among them, the PooleFrenkel emission model, which uses a bulk-limited conduction mechanism, may successfully fit with the I - V characteristics of the devices with 5- and 18-nm-thick $TaN_x$ films. Values of ~0.4 eV of trap energy and ~20 of dielectric constant were extracted from the fitting. These results can be well explained by the amorphous micro-structure and point defects, such as oxygen substitution ($O_N$) and interstitial nitrogen ($N_i$) in the $TaN_x$ films, which were revealed by transmission electron microscopy and UV-Visible spectroscopy. The nonlinear conduction characteristics of $TaN_x$ film can make this film useful as a selector device for a crossbar array of a resistive switching random access memory or a synaptic device.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.42-43
• /
• 2002

반도체 디바이스의 발전은 높은 직접화 및 동작 속도를 추구하고 있으며, 이를 위해서 MOSFET의 scale down시 발생되는 문제를 해결해야만 한다. 특히, Channel이 짧아짐으로써 발생하는 device의 열화현상으로 동작전압의 조절이 어려워 짐을 해결해야만 하며, gate oxide 두께를 줄임으로써 억제할 수 있다고 알려져 왔다. 현재, gate oxide으로 사용되고 있는 SiO2박막은 비정질로써 ～8.7 eV의 높은 band gap과 Si기판 위에서 성장이 용이하며 안정하다는 장점이 있으나, 두께가 1.6 nm 이하로 얇아질 경우 전자의 direct Tunneling에 의한 leakage current 증가와 gate impurity인 Boron의 channel로의 확산, 그리고 poly Si gate의 depletion effect[1,2] 등의 문제점으로 더 이상 사용할 수 없게 된다. 2001년 ITRS에 의하면 ASIC제품의 경우 2004년부터 0.9～l.4 nm 이하의 EOT가 요구된다고 발표하였다. 따라서, gate oxide의 물리적인 두께를 증가시켜 전자의 Tunneling을 억제하는 동시에 유전막에 걸리는 capacitance를 크게 할 수 있다는 측면에서 high-k 재료를 적용하기 위한 연구가 진행되고 있다[3]. High-k 재료로 가능성 있는 절연체들로는 A1₂O₃, Y₂O₃, CeO₂, Ta₂O, TiO₂, HfO₂, ZrO₂,STO 그리고 BST등이 있으며, 이들 재료 중 gate oxide에 적용하기 위해 크게 두 가지 측면에서 고려해야 하는데, 첫째, Si과 열역학적으로 안정하여 후속 열처리 공정에서 계면층 형성을 배제하여야 하며 둘째, 일반적으로 high-k 재료들은 유전상수에 반비례하는 band gap을 갖는 것으로 알려줘 있는데 이 Barrier Height에 지수적으로 의존하는 leakage current때문에 절연체의 band gap이 낮아서는 안 된다는 점이다. 최근 20이상의 유전상수와 ～5 eV 이상의 Band Gap을 가지며 Si기판과 열역학적으로 안정한 ZrO₂[4], HfiO₂[5]가 관심을 끌고 있다. HfO₂은 ～30의 고유전상수, ～5.7 eV의 높은 band gap, 실리콘 기판과의 열역학적 안전성 그리고 poly-Si와 호환성등의 장점으로 최근 많이 연구가 진행되고 있다. 또한, Hf은 SiO₂를 환원시켜 HfO₂가 될 수 있으며, 다른 silicide와 다르게 Hf silicide는 쉽게 산화될 수 있는 점이 보고되고 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.335-340
• /
• 2013

In this study, the plasma etching of the TaN thin film with $CH_4/BCl_3/Ar$ gas chemistries was investigated. The etch rate of the TaN thin film and the etch selectivity of TaN to $SiO_2$ was studied as a function of the process parameters, including the amount of $CH_4$. X-ray photoelectron spectroscopy (XPS) and Field-emission scanning electron microscopy (FE-SEM) was used to investigate the chemical states of the surface of the TaN thin film.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.195-198
• /
• 1999

A Bi$_4$Ti$_3$O$_{12}$ (BIT) thin film is prepared by sol-gel method using acetate precursors and evaluated whether it could be applied to NVFRAM. The drying and the annealing temperature are 40$0^{\circ}C$ and $650^{\circ}C$, respectively and they are determined from the DT-TG analysis. The BIT thin film deposited on Pt/Ta/SiO$_2$/Si substrate shows orthorhombic perovskite phase. The grain size and the surface roughness are about 100 nm and 70.2$\AA$, respectively. The dielectric constant and the loss tangent at 10 KHz are 176 and 0.038, respectively, and the leakage current density at 100㎸/cm is 4.71$mutextrm{A}$/$\textrm{cm}^2$. In the results of hysteresis loops measured at $\pm$250㎸/cm, the remanent polarization (Pr) and the coercive field (Ec) are 5.92$mutextrm{A}$/$\textrm{cm}^2$ and 86.3㎸/cm, respectively. After applying 10$^{9}$ square pulses of $\pm$5V, the remanent polarization of the BIT thin film decreases as much as about 33% from 5.92 $\mu$C/$\textrm{cm}^2$ of initial state to 3.95 $\mu$C/$\textrm{cm}^2$.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.89-94
• /
• 1997

A new type SO$_2$ gas sensor with a particular inorganic thin film on SAW devices was developed. The sensor consisted of twin SAW oscillators of the center frequency of 54 MHz fabricated on the LiTaO$_3$ piezoelectric single crystal. One delay line of the sensor was coated with a CdS thin film that selectively adsorbed and desorbed SO$_2$, while the other was uncoated for use as a stable reference. Deposition of the CdS thin film was carried out by the spray pyrolysis method using an ultrasonic nozzle. The sensor could measure the concentration in air less than 0.25 parts per million of SO$_2$. Stability of the sensor turned out to be as good as less than 20ppm, recovery time after each measurement was as short as 5 minutes. Repeatability of the measurement was confirmed through so many reiterated experiments. Hence, the SAW sensor developed through this work showed promising performance as a microsensing tool of SO$_2$. Further work required to improve the performance of the sensor includes enhancement of the reactivity of the CdS thin film with SO$_2$ through appropriate dopant addition, an increase of the center frequency of the SAW device.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.186-187
• /
• 2000

1차원 자성 포토닉 결정이란, 결함층으로 삽입된 자성층에 빛이 국재화되어 거대한 페러데이 회전각($ heta$$_{F}$ )과 투과율(T)을 나타낸다는 점에서 주목을 받고 있다. 본 논문에서는 두 종류의 SiO$_2$와 Ta$_2$O$_{5}$를 절연층으로 하는 샌드위치 구조에 Bi를 치환한 가네트 박막을 결함층으로 하는 1차원 자성 포토닉 결정으로부터 가시광선이나 적외선 영역에서의 Bi함량에 따른 1차원 자성 포토닉 결정의 성능지수를 조사하였다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.452-460
• /
• 2007

Ultra-low loss ZERODUR and fused silica mirrors were manufactured and their light scattering characteristics were investigated. For this purpose, ZERODUR and fused silica substrates were super-polished by the bowl feed method. The surface roughness were 0.292 ${\AA}$ and 0.326 ${\AA}$ in rms for ZERODUR and fused silica, respectively. To obtain the high reflectivity, 22 thin film layers of $SiO_2$ and $Ta_2O_5$ were deposited by Ion Beam Sputtering. The measured light scattering of ZERODUR and fused silica mirror were 30.9 ppm and 4.6 ppm, respectively. This shows that the substrate surface roughness is not the only parameter which determines the light scattering of the mirror. In order to investigate the mechanism for additional light scattering of the ZERODUR mirror, the surface roughness of the mirror was measured by AFM and was found to be 2.3 times higher than that of the fused silica mirror. It is believed that there is some mismatch at the interface between the substrate and the first thin film layer which leads to the increased mirror surface roughness. To clarify this, the contact angle measurements were performed by SEO 300A, based on the Giriflaco-Good-Fowkes-Young method. The fused silica substrates with 0.46 ${\AA}$ in its physical surface roughness shows lower contact angle than that of the ZERODUR substrate with 0.31 ${\AA}$. This indicates that the thin film surface roughness is determined by not only its surface roughness but also the surface energy of the substrate, which depends on the chemical composition or crystalline orientation of the materials. The surface energy of each substrate was calculated from a contact angle measurement, and it shows that the higher the surface energy of the substrate, the better the surface roughness of the thin film.