• 한국재료학회지
• /
• 제29권11호
• /
• pp.684-689
• /
• 2019

Single crystals, which have complexed composition, are fabricated by solid state grain growth. However, it is hard to achieve stable properties in a single crystal due to trapped pores. Aerosol deposition (AD) is suitable for fabrication of single crystals with stable properties because this process can make a high density coating layer. Because of their unique features (nano sized grains, stress inner site), it is hard to fabricate single crystals, and so studies of grain growth behavior of AD film are essential. In this study, a $BaTiO_3$ coating layer with ${\sim}9{\mu}m$ thickness is fabricated using an aerosol deposition method on (100) and (110) cut $SrTiO_3$ single crystal substrates, which are adopted as seeds for grain growth. Each specimen is heat-treated at various conditions (900, 1,100, and $1,300^{\circ}C$ for 5 h). $BaTiO_3$ layer shows different growth behavior and X-ray diffraction depending on cutting direction of $SrTiO_3$ seed. Rectangular pillars at $SrTiO_3$ (100) and laminating thin plates at $SrTiO_3$ (110), respectively, are observed.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.689-694
• /
• 1992

Strontium Titanate single crystal is grown by Verneuil method. Feed materials were prepared by coprecipitation method which started with Sr(NO3)2 and TiCl4. SrTiO3 can not be grown from feed materials having the stoichiometric components due to volatilization of SrO, when the powder added more 3 wt% SrO used, the crystal can be grown. Growth conditions that the pressure of oxygen and hydrogen gas was 5 psi, the flow rate of oxygen and hydrogen was 7.3 and 30ι/min respectively, the growth rate was 20 mm/hr were optimum. The grown single crystal has the diameter of 10~15 mm and its length is 30~40 mm. The grown crystal was deep brown color and somewhat transparent. The color of grown crystal was lightened after annealing.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.87-93
• /
• 1995

Floating zone법으로 strontium titanate 단결정을 육성하였다. 성장조건은 공기 분위기하에서 성장속도 3mm/hr, 상부축 회전속도 20~25rpm, 하부축 회전속도 15~20rpm이었으며 육성한 단결정은 옅은 갈색을 띄고 있었으며 투명하였고 annealing 후 색깔이 옅어짐을 확인할 수 있었다. 성장방위는 [112] 방향이었으며 XRD, EDS로 화학양론적인 조성은 $SrTiO_3$단일 결정상임을 알 수 있었다. $350^{\circ}C$, KOH용액에서 5분동안 chemical etching하여 etch pit pattern을 조사하였으며 상온하에서$350^{\circ}C$의 온도 범위에서 유전상수 값을 조사하였다.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.261-267
• /
• 2023

마이크로파 유전체 적용을 위해 (Ca, Sr)(Zr, Ti)O₃ (CSZT) 계에서 MgO 첨가에 따른 결정 구조, 미세 구조, 및 유전 특성을 연구하였다. 고상 반응법을 통해 합성된 CSZT 분말은 orthorhombic 단일상을 형성하였다. CSZT의 시편을 각각 1200℃, 1300℃ 및 1400℃에서 소결하였고, 소결 후 모든 시편은 orthorhombic 단일상을 확인하였다. 또한 모든 소결 시편은 온도가 증가함에 따라 입자 크기가 증가하였다. 1 mol% MgO를 첨가한 시편의 경우도 소결 이후에 orthorhombic 구조를 갖는 것을 확인하였다. EDS 분석을 통해 1400℃에서 소결 중에 이차상이 형성된 것을 확인하였다. MgO 첨가된 CSZT의 입자크기분포와 치밀화는 첨가하지 않은 경우와 거의 유사했으나, 입자크기분포가 좁아지며 균일해지는 것을 확인하였다. MgO 첨가된 CSZT는 1 k Hz에서 ε_r = 34.14, tanδ = 0.00047, τ_ε = -3.58 ppm/℃로 우수한 저손실 유전 특성을 가졌다.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.810-814
• /
• 2005

[ $Pb(Zr_{0.2}Ti_{0.8})O_3/SrRuO_3$ ] heteroepitaxial thin films were deposited at various temperatures on single crystal $SrTiO_3$ substrates by pulsed laser deposition and characterized for the microstructural and ferroelectric properties. The $SrTiO_3$ substartes etched by buffered oxide etch $(pH{\thickapprox}5.8)$ solution for 20s followed by the thermal annealing at $1000^{\circ}C$ for 1h showed the terrace ledges with a 0.4nm height. The $SrRuO_3$ bottom electrodes with a thickness of 52nm grown on $SrTiO_3$ single crystal also exhibit a terrace ledge similar to that of $SrTiO_3$. The PZT thin films were grown with an epitaxial relationship and showed typical P-E hysteresis loops shown at the epitaxial films. The 56nm thick-PZT films deposited at $650^{\circ}C$ exhibit a remanent polarization $(p_r)$ of $80{\mu}C/cm^2$ and a coercive field $(E_c)$ of 160kV/cm.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.209-214
• /
• 1995

99.9%의 $Fe_2O_3$ 를 0.2 wt% 첨가한 $SrTiO_3$ 단결정을 air 분위기와 질소분위기하에서 floating zone 법으로 성장시켰다. 성장속도는 5mm/hr 였으며 회전속도는 30rpm이었다. 육성한 결정을 성장방향에 수직하게 절단하여 준비한 시편을 질소분위기하에서 900, 1000, $1100^{\circ}C$에서 2시간동안 annealing한 후 비저항을 측정하였다. 측정한 비저항치를 전기전도도로 전환하고 이를 이용해 계산한 activation energy로서 전기전도도 향상기구를 설명하고자 하였다.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.73-78
• /
• 2003

(Ba/sub 1-x/Sr/sub x/)TiO₃ (BST, 0.4< x <0.65) single crystals were successfully grown by the TSSG (Top-Seeded Solution Growth) method, using a commercial [100] SrTiO₃ or as-grown [100] BST single crystals as seed crystals. To obtain the BST single crystals with various compositions x, the Ba/sr molar ratios in the solutions were systematically controlled while the Ti ion content among all cations was fixed at 67 mol%. A linear regression curve between their x values and the molar ratios of Sr/(Ba + Sr) in the solutions could be obtained, which in turn could used to select the initial composition to produce BST crystal with an aimed x value. In addition, the isothermal growth was found more effective for obtaining a compositional uniformity than a slow cooling process.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권3호
• /
• pp.6-11
• /
• 2004

YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) films were deposited on MgO(100) and SrTiO$_3$(100) single crystal substrates by cold-wall type MOCVD method using continuous source supplying system. Under the deposition temperature of 740∼76$0^{\circ}C$, c-axis oriented YBCO films were obtained. In case of the YBCO films deposited on MgO (100) single crystal substrate, the critical temperature (T$_{c}$) was under 81 K regardless of the deposition conditions, whereas T$_{c}$ of the YBCO films deposited on SrTiO$_3$(100) single crystal substrate was 83∼84 K. The critical current (I$_{c}$) of the YBCO film deposited on SrTiO$_3$(100) single crystal substrate for 30 min was 49 A/cm-width and the critical current density (J$_{c}$) was 0.82 MA/$\textrm{cm}^2$ to film thickness of 0.6 ${\mu}{\textrm}{m}$. I$_{c}$ increased to 84.4 A/cm-width as the deposition time increased to 50 min, but J$_{c}$ decreased to 0.53 MA/$\textrm{cm}^2$ to film thickness of 1.8 ${\mu}{\textrm}{m}$.rm}{m}$.

• 한국세라믹학회지
• /
• 제37권10호
• /
• pp.1008-1013
• /
• 2000

SrTi $O_3$(001) 단결정 기판 위에 졸-겔 스핀코팅으로 $SrBi_2(Ta,Nb)_2O_9$ 박막을 도포하고 그 결정화 과정을 고온 X-선 회절분석 (HTXRD)으로 추적하면서 Pt(111)/Ti/ $SiO_2$/Si 위에 성장한 박막과 비교하였다. SrTi $O_3$(001) 단결정 기판 위에 도포된 $SrBi_2Nb_2O_{9}$ 박막은 fluorite-like phase와 같은 transient phase를 거치지 않고 곧바로 순수한 $SrBi_2Nb_2O_9$ 상으로 결정화가 시작되었으며 결정화가 시작되는 온도인 ${\sim}540^{\circ}C$부터 c축 배향성장하였다. 또한 $SrB i_2(Ta,Nb)_2O_9$ 박막은 Ta/Nb 비에 관계없이 $SrTiO_3$(001) 위에서 모두 $(00{\ell})$로 배향되었으며, 코팅 횟수가 늘어나 필름의 두께가 증가함에 따라 c축 배향성은 미세한 감소를 보였다. $SrBi_2Nb_2O_9/SrTiO_3$단면을 TEM으로 관찰한 결과 $SrBi_2Nb_2O_9$은 대체로 불규칙한 크기의 다결정체로 되어 있었으나 계면 부근에서는 [001]$_{SBN}$//[001]$_{SrTi}$ $O_3$/, [100]$_{SBN}$//[100]$_{SrTi}$ $O_3$/라는 결정학적 관계를 가지며 에피탁샬 성장했음을 알 수 있었다.있었다.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1566-1570
• /
• 2018

We investigated the visible emission property of $SrTiO_3$ (STO) single crystals irradiated with gammy-ray (${\gamma}$-ray) at various total doses up to 900 kGy. The electric and optical absorption properties of the irradiated STO samples were hardly changed with the ${\gamma}$-ray irradiation, compared with those of un-irradiated STO. In contrast, the visible emission near 550 nm increased with the ${\gamma}$-ray dose increasing. While the development of the visible emission was indicative of the increase of oxygen vacancies inside STO by the ${\gamma}$-ray irradiation, the newly generated oxygen vacancies were not significantly harmful to the electric and optical properties of STO. We concluded that the STO single crystal should have a good tolerance against the damage by the ${\gamma}$-ray irradiation.