한국재료학회지 (Korean Journal of Materials Research)

  • 제29권11호
  • /
  • Pages.684-689
  • /
  • 2019
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

상온분사분말공정에 의해 SrTiO3 (100), (110) Seed에 코팅된 BaTiO3의 고온 성장 거동 분석

High Temperature Grain Growth Behavior of Aerosol Deposited BaTiO3 Film on (100), (110) Oriented SrTiO3 Single Crystal

  • 임지호 (인하대학교 신소재공학과) ;
  • 이승희 (인하대학교 신소재공학과) ;
  • 김기현 (인하대학교 신소재공학과) ;
  • 지성엽 (인하대학교 신소재공학과) ;
  • 정승운 (인하대학교 신소재공학과) ;
  • 박춘길 (인하대학교 신소재공학과) ;
  • 정한보 (인하대학교 신소재공학과) ;
  • 정대용 (인하대학교 신소재공학과)
  • Lim, Ji-Ho (Department of Materials Science and Engineering, Inha University) ;
  • Lee, Seung Hee (Department of Materials Science and Engineering, Inha University) ;
  • Kim, Ki Hyun (Department of Materials Science and Engineering, Inha University) ;
  • Ji, Sung-Yub (Department of Materials Science and Engineering, Inha University) ;
  • Jung, Suengwoon (Department of Materials Science and Engineering, Inha University) ;
  • Park, Chun-kil (Department of Materials Science and Engineering, Inha University) ;
  • Jung, Han-Bo (Department of Materials Science and Engineering, Inha University) ;
  • Jeong, Dae-Yong (Department of Materials Science and Engineering, Inha University)
  • 투고 : 2019.09.03
  • 심사 : 2019.10.11
  • 발행 : 2019.11.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Single crystals, which have complexed composition, are fabricated by solid state grain growth. However, it is hard to achieve stable properties in a single crystal due to trapped pores. Aerosol deposition (AD) is suitable for fabrication of single crystals with stable properties because this process can make a high density coating layer. Because of their unique features (nano sized grains, stress inner site), it is hard to fabricate single crystals, and so studies of grain growth behavior of AD film are essential. In this study, a $BaTiO_3$ coating layer with ${\sim}9{\mu}m$ thickness is fabricated using an aerosol deposition method on (100) and (110) cut $SrTiO_3$ single crystal substrates, which are adopted as seeds for grain growth. Each specimen is heat-treated at various conditions (900, 1,100, and $1,300^{\circ}C$ for 5 h). $BaTiO_3$ layer shows different growth behavior and X-ray diffraction depending on cutting direction of $SrTiO_3$ seed. Rectangular pillars at $SrTiO_3$ (100) and laminating thin plates at $SrTiO_3$ (110), respectively, are observed.

키워드

참고문헌

  1. J. H. Lee, M. H. Lee, T. K. Song, W.-J. Kim, Y. S. Sung and M.-H. Kim, Korean J. Mater. Res., 27, 144 (2017). https://doi.org/10.3740/MRSK.2017.27.3.144
  2. K.-D. Min, J. Lee and S.-J. Kim, Korean J. Mater. Res., 23, 244 (2013).
  3. M. Acosta, N. Novak, V. Rojas, S. Patel, R. Vaish, J. Koruza, G. A. Rossetti Jr. and J. Rode, J. Am. Ceram. Soc., 4, 041305 (2017).
  4. D. Lee, H. Vu, H. Sun, T. L. Pham, D. T. Nguyen, J.-S. Lee and J. G. Fisher, Ceram. Inter., 42, 18894 (2016). https://doi.org/10.1016/j.ceramint.2016.09.038
  5. E. Uwiragiye, M. U. Farooq, S.-H. Moon, T. L. Pham, D. T. Nguyen, J.-S. Lee and J. G. Fisher, J. Eur. Ceram. Soc., 37, 4597 (2017). https://doi.org/10.1016/j.jeurceramsoc.2017.06.015
  6. T. Yamamoto and T. Sakuma, J. Am. Ceram. Soc., 77, 1107 (1994). https://doi.org/10.1111/j.1151-2916.1994.tb07281.x
  7. M. K. Kang, Y. -S. Yoo, D.-Y. Kim and N. M. Kim, J. Am. Ceram. Soc., 83, 385 (2000). https://doi.org/10.1111/j.1151-2916.2000.tb01201.x
  8. P. W. Rehring, G. L. Messing and S. T. McKinstry, J. Am. Soc., 83, 2654 (2000).
  9. C.-K. Park, S. H. Lee, J.-H. Lim, J. Ryu, D. H. Choi and D.-Y. Jeong, J. Ceram. Int., 44, 20111 (2018). https://doi.org/10.1016/j.ceramint.2018.07.303
  10. J.-H. Lim, C.-K. Park, S. H. Cho, J.-W. Kim, H. S. Kim and D.-Y. Jeong, J. Ceram. Int., 44, 10829 (2018). https://doi.org/10.1016/j.ceramint.2018.03.128
  11. J.-S. Lee, S. Yoon, J.-H. Lim, C.-K. Park, J. Ryu and D.-Y. Jeong, Korean J. Mater. Res., 29, 73 (2019). https://doi.org/10.3740/MRSK.2019.29.2.73
  12. J. J. Choi, B. D. Hahn, J. H. Ryu, W. H. Yoon, B. K. Lee and D. S. Park, Sens. Actuators. A. Phys., 153, 89 (2009). https://doi.org/10.1016/j.sna.2009.04.025
  13. S.-B. Kang, M.-G. Choi, Y.-M. Kong, J. Ryu and D.-Y. Jeong, IEEE Trans. Dielectr. Electr. Insul., 22, 1447 (2015).
  14. B.-K. Lee, S.-Y. Chung and S.-J. L. KANGBT, Acta mater., 48, 1575 (2000). https://doi.org/10.1016/S1359-6454(99)00434-6
  15. J. Ryu, B.-D. Hahn, J.-J. Choi, W.-H Yoon, K.-Y. Kim, H.-S. Yun and D.-S. Park, Appl. Catal. B-Environ., 83, 1 (2008). https://doi.org/10.1016/j.apcatb.2008.01.020
  16. T. Uesugi and K. Higashi, J. Mater. Sci., 46, 4199 (2011). https://doi.org/10.1007/s10853-011-5305-2
  17. R. M. German, Crit. Rev. Solid State, 35, 263 (2010). https://doi.org/10.1080/10408436.2010.525197